As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

Hügen & Lange offers you an extensive range in the field of thermoplastic plastics technologies. We manufacture injection molded parts for you in series production, support you in the development of tools and let our tool designers develop them to the finished series part. The tools are maintained and repairs carried out in our own tool shop. In addition to series production, we offer extensive services in series assembly. We help with the development of assembly machines, we also have them built according to your wishes in certified specialist companies and are at your side with a lot of knowledge and competence. With the highest Industry 4.0 standard, we offer paperless and glass production. All data is recorded digitally and can be made available in real time at the customer's request. We are also a DIN ISO 9001: 2015 and IATF 16949 certified company. We always keep our finger on the pulse and know about the continuous change of the market and the technical possibilities. In order to support you in your plans and projects, we offer you extensive and individual customer service.

Gronbach has been developing and producing components and complex assemblies on a production area of over 20,000 m2 with 290 employees since 1964 and has also specialised in the processing of stainless steel and aluminium, surface finishing and plastic injection moulding. In addition, a separate department is dedicated to the development of new surface technologies, manufacturing and assembly processes. The core competencies of the Wasserburg site are in the following areas: Metal processing (bending, milling, deep drawing, drilling etc.) Surfaces (anodising, powder coating, printing, laser engraving) Plastics technology (hybrid, back-moulding) hybrids instrument engineering development work PRODUCTION TECHNOLOGIES AND PROCESSES In the area of production technologies, we have specialized primarily in the surface refinement of stainless steel and aluminum, the production of functional and visible components as well as plastic injection molding and adhesive technology. These technologies form the basis of our equipment technology, but are also offered by us as individual services. We are constantly expanding and renewing our portfolio with new combinations of technologies and materials, e.g. in the art of back-moulding metals such as aluminium and stainless steel with different plastics, in order to be able to offer our customers high-quality and cost-optimised manufacturing processes.

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.

Thermoforming, thermoforming, vacuum forming, vacuum coating, Plattentiefzug, Rollentiefzug, forming, plastic thermoforming, rotation, rotational molding, rotational molding, rotational forming, Rotoationsgiessen, rotational molding, finishing, plastic finishing, CNC milling, 5-axis machine, mold, mold for thermoforming tools, thermoforming tools, Tools aluminum. Plastic tanks, packaging, trays, plastic trays, covers, trays, plastic tubs, food industry, machinery industry, twin-sheet method, twin sheets, blister, plastic packaging, PET blister, ESD material, ESD trays, ESD blister.

We provide CNC machining services - milling, wire cutting, turning, tool services, injection molds, blanking dies, stamping. CNC Milling: + GF + Mikron VCE 1600 Pro - 2017, 1600x900x800 + GF + Mikron VCE 800 Pro - 2015, 800x500x540 DECKEL MAHO - Reisen X, Y, Z 1400x600x500 CNC Turning: Haas SL-30THE - Flug fi 76 - max fi 432mm L max 864mm wEDMWire cutting: + GF + CUT 300SP - 2016, 550x350x400 + GF + CUT 300SP - 2017, 550x350x400 www.firma@cncpartner.com.pl

Ophion R&R CNC was established in 2005. We produce all sorts of carbon fiber parts for our brand and other brands We produce molds from aluminum for manufacturing carbon fiber parts you can find our brand carbon fiber parts here: www.ophionpaddles.com We offer: - R&D and mold manufacturing, -prototyping and production of carbon fiber parts we also offer: -offer a service of custom made Eva foam parts which is made custom for your work environment and your parts -Foam parts for organizing your production line -foam parts to protect your sensitive products and instruments you can find our foam parts here: www.vsenamestu.si

Since its formation in the year 1946, Werner Schmid GmbH has been managed as a traditional family-run company; it is now being led by the third generation. In our technically ultra-modern plants, we mainly manufacture components for the automotive and ventilation industries as well as for measurement and control technology. Apart from metalworking and plastics processing, the domains of design and development, tool-making and further processing are also among the pillars on which the success of our company has been built. Moreover, Werner Schmid GmbH also offers its in-house toolmaking facility for selling tools. The focus of our company is on high precision in the production of highly complex parts as well as specialisation in hybrid technology in which metallic components are coated with plastics. Social and ecological responsibility for the region are as much goals of our company as are sustainable growth, continuous further development, and innovation.

Dear Partner! Our company works as a family business, meeting the needs of our customers at the highest level in order to serve you. Typically, we fulfill individual orders for machine production, robot welding, coordinate measurement,in the field of plastic injection molding and target machine production. We carry out our activities at our locations in Budapest and Fehérgyarmat.

As an innovative development partner and solution finder for technically sophisticated molded parts made of flexible materials, we develop molded rubber parts and rubber composite solutions for customer-specific product requirements in the area of sealing and damping technology and implement them in a highly professional manner. We generally see change and change as an opportunity to develop our core business and increase our economic success. Decades of consistency and continuity form the basis for this and are largely based on the entrepreneurial success of our dedicated employees. Our corporate structures are designed to promote continuous growth and ensure the sustainable stability of companies and to consistently expand our service portfolio. As a competent and reliable supplier, we maintain many long-standing and trusting business relationships with renowned automotive and industrial companies. In doing so, we attach great importance to sustainable, resource-saving solutions as well as the use of various production stages and cutting-edge production technologies. Regardless of the industry, we supply prototypes and large series to a large number of long-standing well-known customers worldwide. From A for automotive, to e-mobility, semiconductor and control technology, household goods, the food industry, mechanical engineering to Z for dental technology.

The company FuN GmbH has specialized in the production of high-quality plastic parts. Our know-how, our technical and our pursuit of the highest quality, provide quality products and qualify us as your partner. Services : Mold / tooling / Lohfertigung in injection moldings, tool repair and eroding Component development / component design Plastics processing / injection / Prototypes and series Translation by Google Translate

EIKOS srl is a manufacturer of technical plastic parts and specializes in injection molding, overmolding and 3D printing. In general, we process all common technopolymers that are available on the market: PS - ABS - PP - PE HD - PET - PA 6 - 66 - 68 - POM - PC - PBT - PVDF - PPS - PU -Teflon. The company was founded in 1995 and is based in Turate, a suburb of Milan. Turate is a strategic location due to its proximity to the Swiss border and all Milanese airports. Together with our customers, we develop components for a wide variety of applications and requirements: electrical industry, machine and plant construction, chemical industry. https://www.youtube.com/watch?v=jR1EVlDcHCw

Ideas made of plastic — this motto characterizes the demands and performance of our company. Tolges products are therefore used worldwide in many areas of everyday life, trade and economy. For over 40 years, our 75 qualified employees have been providing creative plastic ideas, individual productions and comprehensive solutions — everything from a single source on request. The company's own development/design, toolmaking, injection molding and assembly departments guarantee customers consistently high quality. In our production, we process almost all common and known thermoplastics and elastomers. These include ABS, EVA, PA, PC, PE, PEI, PMMA, POM, PP, PS, PVC, TPE and TPU. Thanks to our work for a wide variety of industrial sectors, we have considerable know-how in the processing of technical plastics. In the 2-component process, a hard component (plastic) is combined with a soft component (elastomer) to form a composite part in a joint synchronous process. This process allows the physical properties (strength, weight, etc.) of materials to be optimally combined. > Machine clamping force: from 25 t to 1,000 t > Spray weight: from 1 g to 8,000 g > Part dimensions: up to 1,300 mm (W) x 2,000 mm (L) > 2-K syringes with plasma aftertreatment > Assembly of components > Pad printing, screen printing, embossing

lasercaving lasermilling edm caving

With over 20 years experience in design and manufacturing, we at the CAD CAM Office oHG that innovative tool designs and components come at the right time in compliance with agreed budget to the market. Latest techniques and constant communication with the customer to lay the foundation for a successful cooperation, the success of new products and projects. We offer our customers the highest quality, practical experience and strive with you to excellence. Time delivery to our customers is an essential part to do so. PRODUCTION Finished on our CNC, NC and Conventional Machine tools and we work in our fully air-conditioned rooms for you with the utmost precision: Formaufbauten 3D contour parts Machine components Electrodes Items Series parts / small series Prototypes Gauges Tension recordings Special Solutions / special components CONSTRUCTION The tool designs and associative drawing are generated in a 3D CAD-CAM system Siemens NX (Unigraphics), creating a faster and optimal project cycle is guaranteed. Taking into account economic and technical aspects of plastic, factory and customer standards, the tool designs created by our highly skilled designers. We design for you: Vorserienspritzgusswerkzeuge Injection molding tools a multiple Slide technique mechanically, hydraulically Speziallentformkonzepte High-speed technology Special solutions 2K-3K-xK multi-component tools Core baking technology Turntable (vertical / horizontal) Shifting technique Index plate Transfer technique Multi-cavity molds Internal gas pressure (GID) Entspindelungswerkzeuge mechanical, hydraulic, servo-electric Insert technology tools 1K-2K LSR (Liquid Silicone Rubber) Tools Article analyzes and Entformanalysen Optimization of plastic components

GTK-Prototype UG was founded in 2014 by Tobias Günther and initially dealt with rapid prototyping machines. Over the years, CNC milling and turning as well as assembly and development work were added due to customer requirements. GTK-Prototype develops and designs on behalf of customers as well as internally using the most modern CAD systems such as Solid Works, Autodesk Inventor, Fusion 360 and others and inserts them into a comprehensive CAM system. Through the production of prototypes in medical technology, mechanical engineering and the automotive sector, GTK-Prototype was able to acquire extensive experience in manufacturing. In 2018, the production option laser cutting was added. GTK-Prototype is currently based in Neuhausen near Tuttlingen and will move to the newly built company location in Radolfzell in the course of 2022.

3D-Konstruktion Bayerlein GmbH is an owner-managed family company with decades of experience in the field of printing, pressing and injection molding tools. Starting in the area of design, the company has matured into an all-rounder in the field of tool and mold making through continuous growth and development. By constantly investing in new technologies and machines, we are able to implement our customers' ideas in the highest quality on time. Due to the high level of commitment and flexibility of our employees as well as the necessary know-how, we are able to efficiently implement the increasing individualization of your components. Small to medium-sized series production of components is no problem thanks to our automatic changeover machines. Our core business is the design, development and manufacture of die, press and injection molding tools. Thanks to our 5-axis milling technology, we are also ideally positioned for HSC contract manufacturing.