G.Honsel Aluminium Processing GmbH Your partner for series production In addition to creating our own product lines, we specialize in solving customer-specific problems. Together with you, we develop tailor-made product solutions so that perfect results are always achieved. Our focus is on cutting-edge processing technologies such as milling, sawing, drilling and punching, which have been specially developed to meet the requirements of series production. We know that reliability and consistency are key to producing high-quality aluminum products on a larger scale. Our customers not only appreciate our down-to-earth approach, but above all our reliability and quality. Satisfied customers from various areas such as window construction, façade construction, noise protection and solar speak for our expertise. We do everything we can to provide you with precise and lucrative solutions that exceed your expectations.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

The TDF Steel Kft, a Hungarian-owned medium-sized business, is specialized in steel processing and manufacturing of steel structures and components for construction machinery. Our facility is located about 160 km from Budapest, easily accessible by motorway M5/M44. Our work is founded on a very strong technological basis with many years of manufacturing experience. Due to the continuous and successful marketing activities TDF Steel has established well operating business relations to a number of customers from abroad. As a result we deliver 95% of our products to the European export market. We are proud to cooperate with some of the well-known machine building companies as CNHI/FIAT, Günter Papenburg AG, Henschel Antriebstechnik, Neuson-Forest GmbH to name just a few. Our main goal has been for the last two decades to meet the requirements of our business partners by continuous technological development and improvement of the product quality. Our Quality Management System is certified according to the MSZ EN ISO9001:2015 requirements. Focusing on our outstanding manufacturing knowledge and skills, ongoing improving our quality standards, TDF Steel is a reliable business partner and supplier for the machinery industry. Our product range includes: welded constructions, machine frames, beams, arms, levers, dozer blades, housings of cast manipulators, etc. Our production performs following metal working procedures: · shot/sand blasting · flame/laser cutting of steel plates · bending/rolling of sheets · welding with protective gas both manually and robot controlled · machining as turning, milling, grinding, boring · surface painting applying ground and finish coat Please refer to the additional information about our machine capacities below. After the final quality control our products will be packaged appropriately and so are ready for the shipment to the customer. We trust TDF Steel can fulfil your expectations and soon become your reliable component supplier. Please send us your enquiry and we will be happy to answer your request or give you additional information.Metal sheet processing from 2 mm to 150 mm thickness Thermal cutting process(laser, plasma and flame cutting) Bending Welding Manufacturing Painting Assembling

LECHMANN Engineering GmbH stands for perfection in aluminium for decades. We offer everything from a single source: we plan, develop, produce, refine, print, assemble and advise you on all topics related to this fascinating material. We realise customised solutions as well as series of several thousand pieces. We offer a variety of products and solutions perfectly adapted for your requirements.

We produce stampings, precision springs, and wire forms for the automotive, electronics, computer hardware and lighting industries, among other sectors. Virtually every material is processed by our modern, highly flexible CNC automated machines, allowing quick machine set-ups. Our in-house hardening oven, grinding shop, and assembly equipment further facilitate the timely processing of semi-finished parts according to our customers demands. Perfect surface treatment of our products is guaranteed by plating firms close to our operations. These factors make a quick reaction to customer demands and short lead times possible.

RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.

RUPF INDUSTRIES: Synergien einer starken Gruppe Die RUPF INDUSTRIES GmbH, eine mittelständische, familiengeführte Unternehmensgruppe mit Ursprüngen bis in das Jahr 1859, hat sich als international tätiger Akteur in den Geschäftsfeldern Fahrzeugtechnik, Hydraulik und Maschinenbau etabliert. Mit rund 900 hochqualifizierten Mitarbeitern an 10 Standorten (Deutschland, Osteuropa & Asien) erzielte die Gruppe im Jahr 2024 einen konsolidierten Umsatz von ca. 170 Millionen Euro. Heute ist die RUPF Gruppe stolz auf ihre Partnerschaften mit führenden OEMs und Tier-1-Zulieferern. Die RUPF INDUSTRIES GmbH verdeutlicht mit ihrer Unternehmensstruktur und den spezialisierten Tochtergesellschaften, das durch gezielte Synergien innerhalb einer starken Gruppe innovative und qualitativ hochwertige Lösungen für anspruchsvolle Kunden weltweit realisiert werden können. xing.com rupf-industries.com

We are your system partner for assemblies with components from our plastic injection shop and our stamping shop. We have a great deal of vertical integration at our location in Weinstadt near Stuttgart. Our production is optimally designed for quantities of 1 to approx. 800,000 pieces/year. We are also happy to integrate processing processes and components from our or your partners into the value stream in a process-reliable and economical way. Based on a proven approach, we offer you innovative solutions from a single source.

Since 1991, Torgelower Metallwaren GmbH has stood for quality and know-how in the field of metal processing and tool making. Based in the heart of Western Pomerania, we were able to utilize the region's underestimated potential and develop into an internationally active company. We offer our industrial customers from all over the world the highest standards in the fields of CNC punching, conventional punching, welding in all common processes, CNC milling, steel construction and product packaging. As a certified company, we were able to convince clients from the automotive industry, environmental technology, construction, apparatus engineering and electrical engineering of our quality work with punctuality and maximum precision and have been counting them among our satisfied customer base ever since. In addition to modern technology and equipment, the qualification and commitment of our employees are a central part of our company policy. The highly motivated engineers, foremen and skilled workers work as a team to meet the high demands of our customers. We ensure 100% quality of our products through targeted personnel development and consistent quality management. We offer them individual, project-oriented advice through to technical implementation. In line with your requirements, we provide you with holistic products with maximum production accuracy and consistent quality. The continuous expansion of our product range requires continuous modernization of the company's own machinery and production areas. By expanding our storage system into a modern high-bay warehouse, we can store the appropriate materials, semi-finished products and finished products on 460 pallet spaces and thus respond flexibly to our customer requirements. We responded to the increasing demands of our foundry customers with the inauguration of our steel building in 2009. The new production area of 1,200 square meters and the corresponding equipment enable us to produce and process components weighing up to 20 tons. This makes us one of the few companies in the region that can produce in these dimensions. With passion for our work and many years of experience, we take on any task in the metal sector.

The ARNOLD GROUP stands for intelligent and pioneering fastening technology worldwide. Based on many years of expertise in the production of highly complex extruded parts and innovative fasteners, ARNOLD has long since established itself as a comprehensive system provider and development partner for integrated fastening solutions. The BlueFastening Systems philosophy emphasises this holistic approach: the close integration of engineering, high-quality fasteners, precise functional parts and state-of-the-art feeding and processing technology ensures maximum efficiency, sustainability and global innovative strength - all from a single source. ARNOLD has been part of the Würth Group since 1994 and is driving the future of fastening technology with maximum precision and innovative strength.

Lav.in Lav.in is one of the most structured metal structures in its field (currently it has more than 140 employees and insists on a covered area of over 13,000 square meters, with the possibility of making a warehouse); It is well equipped. Inside, in addition to 4 laser cuts, 1 punching machine, 16 bending machines, 3 calenders, separate welding departments between stainless steel and ferrous materials with 12 workstations, department with assembly line, satin finishing department and polishing, there are also 1 combined laser cutting-punching machine, 2 fiber laser cutting (cheaper up to 50% compared to traditional cuts laser), 1 automatic panel bender, 1 semi-automatic and 1 automatic 4-roll cnc calender. We supply the product including surface treatments. In addition, we have 2 trucks and 2 vans to make deliveries and optimize them times. Our production is mainly oriented to the realization of pre-assembled and assembled for the sectors: naval, furnishing, professional, medical and stoves. Furthermore, we make kitchen hoods and professional ovens; Lav.in is very flexible and reactive both in estimating and in production, guaranteeing very quick deliveries: it is very competitive in terms of prices, thanks also to a photovoltaic system of over 600 kW of power with which Lav.inè is self-sufficient from the point of energy view; Lav.in is certified ISO 9001: 2015; It is OHSAS 18000 certified.

THE COMPANY WAS FOUNDED IN 2004 AND IT WORKS IN THE FIELD OF PRECISION MACHINING. Despite its recent appearance Mecwork boasts a Know - How of 30 years in the field of precision machining, as it was formed as a detachment of an established company, absorbing its technical input and thereby acquiring, automatically, the production capacity and professionalism. Mecwork is certified UNI EN ISO 9001: 2015 and thanks to collaborations with other companies operating in the sector, is a reliable partner in the national and international markets that can provide a complete service.

Our company was founded in 1950 by Karl and Georg Hermann. The quality-oriented tooling was gradually expanded three times in total and 1967, supplemented by an in-house fabrication shop. In the course of further expansion, the entire company moved in January 2003 in the newly built production halls in the local industrial area. Since 1998, the independent company led by Karl Hermann and his granddaughter Michaela Bator subject. A healthy mix of traditional wealth of experience and youthful commitment is thus the result and constantly leads to new innovations. A continuing high priority are our well-trained and experienced staff who are specialized in dealing with new technologies to date. This helps us to provide Quality Policy and Objectives Take mitzutragen. Customer focus, professionalism and quality for many years form the basis of our success. Talk to us when it comes to meet extreme demands on product quality, cost and on time. We look forward to advise you in detail and professionally with our know-how. K. & G. Hermann - your partner in terms of reliability and quality. The tooling In this sector, our long and diverse experience are introduced. Through constant innovation in product, it is possible to respond quickly to customer needs us.During and after the stress of these tools are kept under review and, if necessary, repaired immediately. So with us is a constant monitoring and maintenance of your tools of course. Specifications: * Manufacture of cutting, punching, stamping and embossing tools and composite tools * Maximum tool length: 500 mm Facilities: * CNC milling machines from DMG and Hermle * Sinking EDM Charmilles * Wire EDM machine of Charmilles * Surface grinding of ABA * Lathes * Meßprojektor The stamping Our extensive international customer base includes companies in the automotive, electrical and watch industry, and manufacturers of household appliances and surgical instruments. The stamping itself consists of several brands of eccentric Schuler, Weingarten,

SB TECHNOLOGIES was created to fulfil a specific need of medium and large mechanical companies. Our aim is partly to guarantee the supply of mechanical machinery and specialist services by subcontractors. And partly, to relieve procurement departments from managing dozens of suppliers. Thanks to SB TECHNOLOGIES, clients can turn to a single contactand significantly reduce supplier numbers and management costs. At the same time, clients can rely on a company that guarantees excellent service, quality, prices, and delivery times. SB TECHNOLOGIES Multiservice Centre was founded by Stefano Calzavara after spending thirty years working with Italian companies in the mechanical sector. His direct experience in production, technical departments, quality, and mechanical subcontracting has become an important asset to SB TECHNOLOGIES and its clients. We are able to provide tailor-made solutions for mechanical component supplies and we are a point of reference for technical and design departments of large mechanical industries.

Our company owns a number of 5 production facilities in different areas of Romania, for metal processing. In addition to the only stainless steel pipe factory in Romania, we are also equipped with top equipment for metal processing such as: lasers, plasma cuttings, press brakes and pvd coating

We master the entire metalworking value chain, from development to in-house prototyping to series production. In doing so, we combine customer proximity and partnership with know-how, experience and innovative strength. Our strength lies in the combination of engineering expertise, precise prototyping and high-quality series production.

MARKC, Miha Mlakar s.p. is a Slovenian tooling company specializing in the development and production of high-quality stamping tools, jigs, and low to mid-volume metal parts. Founded in 2022, we quickly evolved from project management into full in-house manufacturing. Our capabilities include progressive, transfer, manual, deep drawing, and prototype tooling. We support customers from initial 3D models and engineering (including simulations and CAD design) to machining, assembly, tryouts, and final implementation into serial production lines. Our in-house equipment includes CNC milling (HAAS, TRIMILL), Wire EDM, grinding, and hydraulic press systems (tool sizes up to 1100 mm). We also collaborate closely with trusted local partners for services such as 5-axis machining, laser cutting, thermal processing, and CMM measuring. We aim to continuously grow our production capacity, with plans to expand machinery, introduce 2D laser cutting, and enlarge our production area by 2027. Located in Stari trg pri Ložu, Slovenia, MARKC is committed to precision, flexibility, and long-term partnerships.

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.

Zambelli manufactures complex sheet metal parts and welded structures with a high level of vertical integration using state-of-the-art production facilities. We would like to convince you of the efficiency and quality of our company. Our customers appreciate our high level of vertical integration and extensive expertise in the development of complex sheet metal parts from individual to series production. We offer you the option of purchasing our products either in individual parts or already fully assembled. Our portfolio includes both large and small series as well as custom-made products.