The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

The Zehnle machining is a company that manufactures the machinery and automotive, as well as parts for rail vehicles and the automotive industry since 1990 Präzisisonsdreh and milled parts. Be edited in addition to steel, stainless steel and aluminum and non-ferrous metals and various plastics. Our Services: - Turn - Milling - Sawing - Measure

ZŚZR is located in Lębork (Pomorskie Province) in Poland. Our company has been operating constantly since 1996, providing a wide range of services in machining. Over the years we have performed thousands of orders, providing our customers the highest quality and short delivery time.

We are producer of high quality milling and millturn parts, from 1 to 1000+ parts are all in our focus. With the 5 axis machines and millturn capabilities, also with our CMM capability, we serve the best part production for our customers.

Our principal activity consists of CNC metalworking and professional assistance in processing components of different materials. The raw materials we process include different polyamides, non-ferrous metals, and stainless steel among others. We are able to carry out the whole process, starting from chopping through surface and heat treatment to packaging the finished product and deliver it worldwide. If needed, we can deliver the product with mesurement record according to VDA or PPAP system. Our producing CNC machines are equipped with the latest-generation thread-guide and powered tool body built-in the revolverhead, which make C and Y-shaft machining possible, starting from 4 mm diameter. We always adjust the most suitable machine to our clients' needs, taking into consideration the machining process. Our corporate philosophy reflects our personal and professional experiences, that is, quality can only be achieved through excellent technical solutions and regular maintenance of our machinery, by using impeccable and continuously monitored materials, tools and measuring devices. Our company has been granted the integrated ISO certificate.

Carbonella Rocco e Figli s.n.c. is a universal automatic turning company for parts made of steel and non-ferrous materials from 3 mm to 32 mm diameter. For more than 25 years now, we have been manufacturing parts in high quality for various industries like precision mechanics and writing instruments. Furthermore we offer full-service. We supply several Italian companies, of which many successfully export our assembled products to different countries throughout the world. A large percentage of our products is exported to Germany, Switzerland, France and England. We mainly ship raw items in several degrees of roughness. Upon request, those items can also undergo heat treatment and galvanic surface upgrades.

Our vision is to be a top performer in production services through advanced technologies. We started the operations in 2019 with a management team having more than 20 years of experience in industrial processes being able to cover a wide range of processing services at high quality standards.

Our company specializes in designing and manufacturing special machines. industrial automation and specialized in the production of highly complex milled and turned parts. The highest priority of our company is the continuous development and expansion of our product and service portfolio in order to always offer our customers the highest quality.

Our company is located south of Budapest, in Pest County, in an industrially and economically strategic area. The high demands arising in custom or mass production are guaranteed by our company's many years of experience and in-depth knowledge of modern technology that supports processing. Our team consists of highly skilled professionals, and we carry out our work in an organized manner, meeting deadlines, at competitive prices, and in compliance with quality standards.

On our CNC machining centers and CNC lathes, we produce as a classic supply business a wide range of parts. And this both for small, medium and large series, as well as for prototyping.

Engineering Metal processing Machining

Company WELLCORE, Ltd. is the modern and dynamic developing company focused to precision machinig, mechanical processing of sheets and tubes as well as powder coating. The company has nothing of its own products and is subcontractor to various domestic and foreign companies in engineering, electrical, agriculture, railway, military and automotive fields. Except production, we offer comprehensive technical solutions to our clients. All products and services are produced according to customers´ orders. 80 % of our production is exported to EU countries as Germany, France, Austria, Sweden, Finland and Czech Republik. The partnership is based on QUALITY - TIME - PRICE. Team of WELLCORE

Our company, was founded as a family establishment with the name TOKMAN TİC. ve SAN. KOLL. ŞTİ. İn 1962. Reaching the year 2007 with a deserved trust and name in its sector through its thorough, serious, and qualified work, it has gone through a series of changes for the needs of the contemporary world. From then on, it would be known as “ TOKMAN RAKOR SAN. ve TİC. LTD. ŞTİ.” to its customers adding the day’s management and quality criteria to its honest and sacrificing sense of service. Firstly, the quality sertificates ISO 9001 and ISO 16949 are gained . Then, in the process of always reaching the best, the approval of AQAP, TYPE Approval Certificate and the Germanischer Lloyd Certificate, which is very significant for us, are our most demanded future targets. In addition to this despite the hard economic conditions, our machine park is given as much importance as possible. TOKMAN, as called by our customers in short throughout years, supports all industries mainly automotive endustry , ship building and earth moving machinery which need fittings . The hoses we work on are air condition, hydraulic, pneumotic, paint, water,steam, food and beverage oil and petrol products, rubber, teflon, stainless steel, certified and high pressure hoses which are used in Shipbuilding Industry.

The BUHLMANN GROUP is a privately held, family owned premium trading company for steel pipes, pipe connectors and pipe accessories. Trusted by customers of high product quality in all standards and grades - ascending trend. In addition extensive expertise in consulting, project management and logistics. This will benefit customers in the Power, Process, Engineering, Oil & Gas and Offshore. Since its founding in 1945, the BUHLMANN GROUP is characterized both by dynamic growth and global expansion.

Ready-to-install turned and milled parts with the highest precision and smallest batch sizes Our core competence is precise machining technology. You can order ready-to-install turned and milled parts from us in a wide variety of shapes and materials. The focus is on: individual production, procurement, customization and specialist advice Processing of hard-to-cut steels such as tempered steel, cold extruded steel, cast steel CNC turning up to D1000/Z3500 mm CNC milling up to X2500/Y1200/Z1000 mm Groove joint width 6—40 mm | lift height 300 mm Manufacture in very small batches of 1—50 units as well as individual and custom-made products Series production batch sizes >1000 pcs Finishing surfaces through hardening, sanding and electroplating in cooperation with our partner companies

We are a team of engineers, technicians and top-class specialists. We have a well-organized production facility and perfectly mastered technology and processes. We have over 25 years of experience gained through the implementation of millions of projects for clients from Europe and North America. We are a certified supplier for many international corporations, including those in the energy, shipbuilding and transport industries. Our qualifications and operating philosophy reflect the reliability of our products and the ability to realize the most difficult projects that meet the strict requirements of our customers. The companies Hoechenlimburger Metalgus and Heinrich Brinkman GmbH also belong to Kigema. Przedsiębiorstwo Odlewniczo-Mechaniczne Kigema sp. Z o. O. announces merger with Kigema SPV sp. Z o.O. Find out more.

Kirschmechanik GmbH manufactures individual parts, small series and prototypes from a wide variety of materials such as aluminium, stainless steel, bronze alloys, steel and plastic using modern CNC machines.

Eglin Präzisionsmechanik AG produces machined parts in the field of mechanical precision manufacturing and is a Swiss SME company and member of SWISSMECHANIC. As managing director, Samuel Eglin is already the third generation in the family-run Eglin Präzisionsmechanik AG. Production focuses on the machining of non-ferrous metals, steels and stainless steels, aluminum and plastics. CNC turning of small and large batch sizes up to Ø65mm from the bar is one of our specialities. We can also easily turn for you from a bar up to a turning diameter of Ø90mm and in the chuck up to a diameter of Ø300mm. In the field of CNC milling, we are set up for milling work with 3-axis machining and traverse paths of 800x510x500mm and 5-axis machining in the area of approx. 300x200x200mm. • Would you like to outsource your production in whole or in part? • Are you looking for a reliable supplier in the field of machining? • Do you need different types of mechanical components? • Do you need support in the area of construction? • Would you like everything from a single source, including design and development, prototyping, series production, heat treatment, surface coating and logistics? • Do you have very high requirements in terms of precision, accuracy, cleanliness, quality and delivery times? In each of these cases you have come to the right place!

Timos Mechanics is a mechanical engineering technology company. Knowledge and experiential experience in core services. Thanks to cooperation with research units, we provide state-of-the-art production solutions.