Our customers appreciate us for our quick and uncomplicated action. We do not do without first-class equipment and manufacture on a 5-axis simultaneous milling machine DMU 50 from DMG with high precision and uncompromisingly. Only quality - and that fast! We are a small, flexible company and work successfully for: Accuracy: Your order demands absolute precision, which we offer you. Simulation: You will get a perfect result through precise planning and simulation. Care: Thanks to the correct handling of the workpiece, we receive the highest quality. Investment: We invest in our technology to offer you the best possible results.

A well-trained staff of 45 professionals in the production and 15 staff in technical and commercial fields set to the requirements of our customers. According to our motto of "Quality and Reliability" we see ourselves as partners to our customers. Based on our experience, we offer you complete solutions: from design to production-ready finished product, incl.Oberflächenbehandlung and assembly. Our product range covers the entire spectrum of sheet metal products, from single parts to large-scale, from simple board to complex workpieces and assemblies for high-tech applications. Designs from all steel grades, stainless steel to sheet thickness 15mm, steel up to 20mm, aluminum up to 12mm are manufactured following products: cabinets, machine covers, housings, containers, cabins, cable channels, displays, electronic components, pipe steel structures, heat exchangers A small selection of products that we manufacture for you: - Switchboards - Container - Displays - Electronic Components - Faceplates - Housing - Cabins - Cable channels - Machine covers - Oil pans - Pipe and steel structures - Cabinets - Steles

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)

The Gehweiler & Lehn Maschinenbau GmbH is a company of the customer-oriented contract manufacturing, which has been founded in 1989 by Georg Gehweiler and Charles Lehn. The company is certified according to DIN EN ISO 9001, DIN EN ISO 3834-2 and has the Manufacturer qualification class E DIN 18800-7. Right now you can with us a capacity of approximately 40 employees. The company is active in the following areas: Development, design and production of machines, devices and equipment to customer specifications. Plant and machinery Mounting in the fields of mechanical, hydraulic, pneumatic and electrical Single mounting Welding Machining

Our continuously developing small group consist of many technicians and engineers. (Typically the number of the employees is 10 to 12 people.) We are really fond of the professional challenges, but during our work we strive for simplicity and try to find the most effective solutions, preferably in a good mood. When we design a new product we pay attention to the functionality but we also take care for the ergonomy and choose the appropriate material according to an esthetic implementation. Our intent is to supply our customers with well usable and high quality products which at the same time have a competitive prices. We are open-minded for new technologies what we have not tried yet. We are able to transform the workable things into a day-to-day practice, this is demonstrated by the current image of our company. We pursue a mutually beneficial partnerships with our customers and subcontractors. We are aware of our abilities and opportunities and our industry position. Not in headcount, but in technological advances and efficiency we often go far beyond the bigger competitors.

Since 2010, our company has been working as a contractor and supplier of special machinery and equipment on the market. At the beginning of our activity we were mainly occupied with the assembly of machinery and equipment, but over time it became necessary to acquire machines for the precise machining of elements. At present we can provide complex services in the field of mechanical engineering - from design to execution to final assembly. Our strengths are experienced engineers and adequate technological assistance. Price competitiveness, short execution times and high quality of the offered services and goods are our priority.

Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.

Trade Production Engineering Advice Service in the fields Hydraulic Pneumatics Electromechanics Lubrication technology Hydraulic cylinder maintenance 3D pipe bending service Air & Gas treatment, compressors Experience over 25 years at 6 locations in Germany, onsite service and 24-hour services. Contractual partner of Parker Hannifin, SMC Pneumatic, SKF Lubrication, CompAir, Power Team.

WE UNDERSTAND AUTOMATION – BRAUN SONDERMASCHINEN GMBH Automation, Industry 4.0 and Big Data are the biggest technology trends of our time. We at Braun recognised these trends early on and have used them consistently to develop highly automated special machines. With customised special machines we help you increase the productivity of your production lines and realise savings potential. We conceptualise, design and construct special machines, production plants, production lines and coating systems according to your individual ideas. We have been there for you for over 40 years with our special machine construction services: Braun conceptualises, designs and constructs individual production plants and coating systems according to customers’ wishes. To do this, we draw on industry-wide technology trends such as electromobility, automation and Industry 4.0. Are you looking for an experienced special machine construction company to optimise your production plants? Then you have come to the right place. With Braun Sondermaschinen GmbH you have an experienced automation partner at your side.

For more than 25 years, ibl Maschinenbau GmbH has been successfully developing and manufacturing custom-made machines, systems, devices, assemblies and individual parts. The desired solution for the optimization of production processes, including drawings, such as robotic workstations, fixtures and systems, assemblies, tool changing vehicles as well as components for production plants is created in our own development and production. Various parts for the automotive industry, packaging and aircraft industry are manufactured in our modern CNC machining centers according to drawings and customer requirements.

Machining of individual/small-serie precision machine parts. Production of A/C Tooling, Engine Tooling and GSE Heat-Treatment . Quality Control and Material Testing Designing and manufacturing of Purpose-built Machinery, Production/Assembly Lines. Repair and renewal of Machine Units/Parts. Measuring Calibration of measuring devices and torque wrenches

Milling, welding, welded constructions

We are Slovak metal processing factory deal with laser cutting of pipes, profiles and sheets, at the customer's request. We also provide laser cutting services on materials supplied directly from customers or we can use materials from our stock, or we can buy them for you. We are providing also MIG welding and robotic MIG welding. We would be delighted if we could make you an offer based on your inquiry Theese days we also started laser-beam welding with 3kw laser source.

Fries Maschinen- und Anlagenbau GmbH is a medium-sized company with over 40 years of experience in metal processing and contract manufacturing. We specialize in sophisticated welded and steel structures in accordance with DIN EN ISO 1090 EXC2, precise CNC machining, industrial painting and the assembly of components and complete systems. As a reliable supplier, we offer tailor-made manufacturing solutions for mechanical engineering, energy, environmental and packaging technology as well as other industrial sectors. Our manufacturing depth enables a high degree of flexibility — from individual parts to series and ready-to-install system components. Our modern machinery, certified quality assurance and a dedicated team guarantee maximum precision and punctuality. We see ourselves as equal partners — with short response times, technical advice and a clear focus on customer requirements. Overview of the range of services: Welded assemblies up to EXC2 in accordance with DIN EN ISO 1090 CNC turning and milling (individual and series production) Painting & surface treatment Complete assembly of components Material processing: steel, stainless steel, aluminum 3D model and drawing processing according to customer specifications We look forward to your request and to working with you as partners!

Welcome to Schur precision parts in Grafenberg. We manufacture long-turning and short turned parts in large and small series with deep holes from Ø 0.5 to Ø 22 mm in one clamping. Furthermore, we offer a special machine for high-precision and long-turning tieflochbohrfähigen and short turning machines. Services: SHORT SPIN CNC 5-axis Bar stock Ø 5-45 mm Chuck parts Ø 5-100 mm With a length of up to 140 mm Milling in one clamping possible All rotating parts are available in one clamping tieflochbohrfähig LONG TURNING CNC 7- 10 axes Bar stock Ø 4-30 mm In a turning length of up to 500 mm Milling possible. All long turning parts in one clamping tieflochbohrfähig Drilling depths up to 165 mm Drill diameter Ø 0.5-22 mm DEEP HOLE DRILLING ELB - method - Drilling to ø 0.7 - 6.0 mm - Drilling depth max. 500mm - Workpiece length rotation max. 440 mm - Workpiece length standing max.900 m Our Mission: "Quality is no coincidence, it is always the result of intelligent effort." Quality objectives: meet customer needs Reliable machining avoid errors Zukunftsorientiertes Customize The latest CNC machines ensure rapid responsiveness to your needs and changes. Measuring and testing equipment and appropriate lessons and measuring equipment guarantee the highest precision and quality. The certification according to DIN ISO 9001: 2008, our quality consciousness completes. See for yourself. We advise partners and offer a comprehensive service.

Welded constructions in single and series production. Welding certificate DIN EN 1090-2 in connection with DIN EN 1090-1. Manufacture of steel structures up to EXC 3. Pressure vessel construction according to the Pressure Equipment Directive (2014/64 / EU) and AD 2000HP0. Pipeline construction Our specialty is welded constructions in single and series production, especially unwinding and piping. Water jet cutting, rolling, milling, bending, plasma cutting, blasting, painting.

Binder Automation is a modern mechanical engineering company with 30 years of experience. Our field of activity is the development and manufacture of customer-specific special machines. Our individual complete solutions cover all relevant fields of activity of your project. From planning, design, manufacture and programming to service and maintenance by Manufacturing facilities: Our service areas are in areas such as - assembly and machining - Transfer and handling - Check and measure - Production lines and transfer lines - Special equipment, special machines - test stations - setting and riveting devices