Facts: The BB machining is a wage rotary company with about 15 employees. With core expertise in the flexible and customized manufacturing, we always strive to ensure our customers high process reliability. Our rotating parts can be found everywhere, where high precision is required. From writing instruments to the furniture, in the control, control and drive technology, tool and model as well as in general engineering to optical industry or even in medical technology. There are lots of industries that we serve. Their development and construction Your purchasing and quality management takes with us coherent solutions to implement your requirements. Options: Produce Multifaceted rotating parts, is for us an everyday task - our ranges of rotation • From about Ø 3 mm up to Ø 32 mm from the rod • Maximum length 300 mm • 6 kt. 3-27 mm Further processing: Post-processing such as grinding, Trovalieren and Diamantiern are of course possible.For heat treatments and surface finishes are our competent partner companies. Materials: We manufacture simple and complex precision turned parts in virtually all materials, including: • All Al-Si alloys and in particular • Stainless steel (VA) steels • construction, deployment, remuneration, nitriding steels and tool steels • Brass, bronze, copper, etc. • Titanium alloys • plastics such as POM or PEEK Other materials? Ask us! Batch sizes: Both simple and highly complex parts are produced in our home always from the perspective of economic efficiency. • Small to medium batch sizes from lot size 1 possible • small series up to 50 pieces • Small batches of 50 to 500 units • and medium runs up to max. 100,000 Quality: Quality and reliability of our products are reflected in the satisfaction of our customers and created on the basis of a modern quality management system certified according to DIN EN ISO 9001:2000. For the implementation of the clear objectives of management, a holistic and integrated manufacturing and inspection planning and continuous monitoring of the entire process is guaranteed by two specially trained staff. This assures you a highest quality standard from the home BBZ.

The company was founded in 1980 by the owner Ivan Gorisek. At first the production was performed in the basement of the private house, but had to be moved to a larger production area due to constant expantion of the production and is today in a production facility of 1400m2. In the beggining the production was mainly performed in curve driven machines, and is today performed on CNC controlled machines. In the year 2012 we established G&G plus Ldt. The advantage of our company is fast delivery times, high quality of end products and reliable production with respect to agreed date of delivery. Our interest is a long-term bussiness relationship with our customers.

Meyer GmbH is a family company founded in 1986. For over 30 years, we have been manufacturing high-quality products for all areas of industry. Our production process produces high-precision and sophisticated turned, long turned and milled parts, which we can also deliver surface-treated upon request. The product range ranges from individual, special to series production. We also offer complete solutions ranging from prototypes to component assembly and brazing work.

Üstek Makina was founded by the mechanical engineer İsmet Üst in 1978. The company manufactures spare parts of automation technology and mechanical parts. Our production contains predominantly fine industrial parts, spare parts of landwirschaftlichen machines, small-caliber precision parts, Pistons, tiller; Multi-axis machining of aerospace industry parts. We have experience with steel, cast iron, wrought stucco, brass, copper, aluminum, titanium, plastics. We can also run on the client thermal processing, surface treatment and very fine loop works requirement. Our company, IS EN ISO 9001: 2000 Qualiaetszeugnis has, is pleased with the experienced Inge kidney and employees under the motto '' The Great products, on time and with best quality 'to serve'. Of course, our company is also the controls that are made by companies from abroad and domestic.

Our workshop is located in Bakonszeg in Hajdú-Bihar county, 7 kilometers from Berettyóújfalu. We are engaged in casting since 1982. We are producing non-series and mass production adopting sand and gravity die casting products.The maximum weight of castings we can produce is 150 kgs for aluminium alloy parts and 200 kgs for copper (tin bronze) alloy parts. We deliver the castings in unmanufactured or after machining. Metal works possibilities are: lathing, milling, AWI shielded-arc welding, heat treatment , sand blasting, electrostatic powder coating etc. We are in contact with companies designing and manufacturing gravity die casting dies. Our customers are companies concerned in transportation, food, agricultural and textile industry, shops selling equestrian sports products.

Your competent partner in the field: Turning - Milling - Grinding Whether item or series production, we deliver the highest precision. Find out about our manufacturing capabilities, we can also solve your intended Zerspanungsproblem. The company Günter Becker is in Osterode am Harz for over 30 years. Until the early 70s, the main business focused on the development and production of automatic wire bending machines for electronic components such as resistors and transistors. After introduction of semiconductor technology made the switch to using pure contract manufacturing in the field of turning, milling and grinding. In this segment, we were not able to establish ourselves in the last southern Harz region through our quality work and numerous attract customers. For our customers today include well-known companies from all industries, including medical, aviation and aerospace technology, automotive industry. We would be happy if we may this also includes you soon! Services ... Our range of services includes: • Item and serial production • Processing of customer parts according to drawing or sample • procurement of materials with test certificate • Installation of smaller assemblies • Delegate of third party services, such as heat and surface treatment, to competent partners • CAD Drafting according to DIN • Final inspection We process almost all materials such as: • aluminum alloys • Steel • Rust-and acid-resistant steels • Titanium alloys • Plastics • Chrome-nickel alloys • and much more ...

As a young company in the middle of East Westphalia, we specialize in milling steel, stainless steel, non-ferrous metals and plastics. Our lean and efficient structures enable us to guarantee an attractive price-performance ratio and maximum flexibility. This enables us to react to unexpected situations at any time with the appropriate measures. Adherence to delivery dates and deadlines are a matter of course for us. With the latest machines, processes and procedures, we achieve the highest level of accuracy, quality and productivity. CAM programming and laser measurement guarantee us the highest precision and process reliability in production. Tight tolerances can be achieved in our quality control through an automated tactile measurement can be checked for dimensional and shape accuracy. Our services at a glance Our modern CNC milling machines enable us to economically manufacture your components in high quality with low tolerances. Thanks to the high spindle speeds of up to 20,000 revolutions per minute, even the smallest geometries can be machined with a high surface quality. All manufacturing processes are digitally optimized in advance for quality and cost-effectiveness. The automatic process monitoring ensures consistent precision and quality even with larger series. We manufacture according to 3D data in all common formats as well as according to drawings or sketches. We are also happy to support you in designing your workpieces for machining. We specialize in components with a size of up to 650 x 450 x 300 mm with a maximum workpiece weight of 800kg made of various materials (steel, stainless steel, non-ferrous metals, plastic). Together with our partners, we are happy to implement surface refinement according to your requirements.

Disentis in Graubünden mountain world: Where other people go on holiday, arise in our modern, efficient work "ideas in metal" from design to manufacture high quality product. Our experienced team of specialized and motivated staff is proud to vouch for versatility with the highest precision. " Toolmaking: High-performance hot runner molds for the processing of technical thermoplastics and thermosets | injection molds for the processing of technical thermoplastics and thermosets with all gate systems | Pressure die casting molds for the processing of aluminum, zinc and magnesium | punching & bending tools for the processing of steel, aluminum, copper, etc | Our mold & mold sizes include: injection, punching bending & die casting tools from 96x96 to 596x596 mm | Sampling: We sampled at the customer's injection molds up to a closing force of 950 KN. Machining Highest accuracy in the production of small and large series is self-evident for us. Thanks to modern machinery and high quality tools we achieve a highly favorable cost - benefit ratio. We process: series of 5 to 50,000 pieces of steel, aluminum and non-ferrous metals up to 1000 x 650 x 500 mm. Component technology Co-development, prototype manufacture, fabrication of parts, procurement of commercial goods and electronics, as well as the installation, the wiring, final inspection and shipping worldwide. Punching and bending technology With our unfassenden know how we can make even the most demanding customers satisfied eg in the electronics industry. Thanks sophisticated tool technology, we are able to punch in one step, turn and rivets. With machines up to 70 tons we process all materials between 0,01 and 4,0 mm. Thermal and surface treatments are carried out in our responsibility. Coil fabrication Through our manufacturing experience and meeting deadlines, we can meet the high demands of a large number of customers worldwide meet. In our manufacturing centers, we process: round wire 3-5 mm, imTakt of approximately 10 pieces per minute. Rectangular wires of 3.15 x 7.1 x 0.6 mm to 5 mm can be edited manually.

We are a company that specializes in the processing of thermoplastics and Thermosetting plastics and light metals. From plates, rods, tubes and profiles are manufactured to order parts and assemblies according to drawings, CAD files, sketches, or samples from individual to mass production.

Schwichtenberg GmbH in Lemgo has been manufacturing sophisticated precision turned and milled parts for medical technology, aerospace, various branches of industry, mechanical engineering and the automotive industry in the field of motor sports since 2002 and now employs over 90 people. From the very beginning, Schwichtenberg has specialised in the production of high-precision turned and milled parts. Production is carried out in quantities entirely in accordance with the customer's requirements. Whether samples, prototypes or small and large series. Initial sample tests, measurement reports and material test certificates can also be provided on request. Other services related to the product are also part of the offer today as a matter of course. Schwichtenberg now produces your products economically, reliably and on time on more than 20 technologically up-to-date production units: We look forward to meeting you, your employees and your tasks!

At Optimised 3D Engineering, we provide a complete technical solution for product design, prototyping, manufacturing and general product support. With our expertise in 3D printing, Design, patent protection, manufacturing and more, we can provide you with the support you need to make your product a success.

Our company, which sets out with the principles of customer focus, reliability, impartiality, responsibility, accessibility and self-sacrifice, has adopted the principle of providing project, manufacturing and engineering services to all our customers by offering new technologies, supporting individual and corporate development and being a name sought in the sector.

Ensuring Success and confirm confidence. With precision and reliability. This is our corporate philosophy. Pohl and Jehne is a manufacturer of precision turned parts in feinmechnischer manufacturing with the latest technology turning and milling technologies. In multi-axis CNC lathes and CNC milling machines we manufacture, depending on quantity and technological requirements plant parts per carton or as a single unit as feed work. As a result of additional investments we can also offer long turned parts as well as the production of complex machined parts on a CNC 5-axis milling center. Our guarantee of success are: * Accuracy in manufacturing * Stability in series production * On-time delivery (just in time) * The execution of master agreements * Continuous review and improvement of our manufacturing processes and resources. * Processing of almost all materials (steel S235 and S355, stainless steel V2A and V4A, aluminum, Brass, copper, plastics PA6, POM, PEEK). Our confidence guarantors are: * Qualified and motivated employees * Diverse manufacturing technologies * Experienced Quality Experts * A really active quality management system according to DIN EN ISO 9001:2008 technological advantages: * Manufacturing of precision turned parts * Flexibility in the production of small series, medium series and large series * Flexibility in the production of long lathe and short lathe Additional services * Surface finishing with long-term partners (paint, zinc plating, chrome plating, anodizing, passivating, grinding, brushing, etc.) * Sign of article numbers

Precision Turned Parts - stainless steel as well as all machinable materials, preferably stainless and acid-resistant stainless steel - from 1.0 mm to 250 mm diameter parts length up to 450 mm Precision milled parts - to cube 400x400x400 mm Assemblies - Partial and complete assembly Standard Parts - from all machinable materials Heat treatment - and galvanic surface treatment according to customer

Benefit from our years of experience in the field of CNC turning and milling technology, production and processing of special screws of various kinds and the mechanical processing on a contract basis. If standard screws are no longer sufficient for the required applications, we provide the appropriate special screws. On standard parts we can make numerous adjustments: • thin shaft • groove • peak • undercut • Shorten • transverse bore or longitudinal bore We are happy to advise you on the design and dimensioning of the special screws. Often our recommendations help out and improve the quality or cost of the desired special screws even further. Visit our website at www.gisomeiergmbh.de

We are a contract manufacturing company and worked for mechanical engineering in all areas, for nearly 50 years. The main field of activity lies in the turning technique and extends from 10mm diameter up to 450mm diameter and turning lengths up to 1500mm.Unsere modern CNC machines have spindle passages to 100mm, driven tools and tailstock, so complete machining possible ist.Exakte and more than 20 years of experience in the machining vonV2A / V4A stainless steel, Duplex, Monel, Hastelloy, Inconel, quenched and tempered steels of all kinds, as well as all other machinable materials to your specifications. Individual parts, small series and batch sizes up to 1000 pieces with the highest precision. Our strengths are: Cheap Kostenstrucktur - highly flexible and fast - order goes directly from the fax machine - on schedule, and reliable! Delivery times of less than 10 days! Our machinery: DMG Gildemeister CTX 400 S2, CTX 410, CTX 600, contur H66. Manual rotation - and milling machines: Saeilo contur, VDF, Heckler & Koch, Maho 600P. Our Web - present tense. www.brehm-zerspanung.de The company V. Brehm & Son metalworking We manufacture the most modern CNC machine turned parts in small - and medium series. Even single-part production of the highest quality and short delivery are our strengths. Our years of experience in the machining of various materials, is the basis for our reliability, and have been for almost 50 years This service is possible to edit the you-supplied or purchased from us material quickly and reliably because of our highly trained and experienced skilled workers. Strengths or statement of work 1 Top quality and full-time delivery 2 Precise processing of V4A stainless steel, duplex - steel, Hastelloy, Inconel, Monel, and hardened steel, tool steel, cast iron and non - ferrous metals according to your specifications 3 item and serial production of the highest precision 4 immediate delivery after completion

We, MEHTAB Maschinenbau GmbH, are a medium-sized mechanical engineering company. Our range of services includes manufacturing based on samples, sketches and technical drawings. Our core competencies lie in the areas of machining technology, fixture and special machine construction as well as in general locksmith work. We always produce individual parts, small series and medium and large series with maximum precision and flexibility. Thanks to our modern machinery and an extensive material warehouse, we can process your orders at short notice and short Guarantee delivery times. We process steel, stainless steel, aluminum, brass, copper and various plastics. You will usually receive our offers within a few hours. Our website: www.mehtab.de Excerpt from our machinery: 5-axis milling machine: DMG DMU 75 monoBlock Working area: X750 Y 650 Z 560 D600mm https://de.dmgmori.com/resource/image/690198/product_picture/xlg/8/dmu-75-monoblock-2nd-product-picture.webp DMG DMU 60 eVo Working area: X600 Y 500 Z500 D600mm https://de.dmgmori.com/resource/image/18956/product_picture/xlg/8/dmu-60-evo-linear-product-picture.webp 3-axis milling machine: DMG CMx 600V Working area: X 600 Y 700 Z 500 mm https://de.dmgmori.com/resource/image/15736/product_picture/xlg/8/cmx-600-v-product-picture.webp DMG DMC 1450 Working area: X 1400 Y 700 Z 500 mm https://en.dmgmori.com/resource/image/6578/article/xlg/3/1-cimt-2015-asian-premiere-dmc-1450-v.webp Vacuum plate milling machine: Datron MLCube Working area: X 1520 Y 1020 Z 245 mm https://www.datron.de/fileadmin/_processed_/a/9/csm_MLCube_V01.bip.124.1_8871ef4a5f.webp Lathe: DMG Ecoturn 450 Working range: D 400 Z 800 mm (rod opening 80 mm) https://de.dmgmori.com/resource/image/16090/product_picture/xlg/11/clx-450-product-picture.webp