We are a globally active mechanical engineering company with more than 100 locations worldwide. We in St. Stefan are the international competence center for class 1 - lightweight steel and machine components with medium dimensions and their mechanical processing as well as a high level of hydraulic expertise! What sets us apart is the entire process chain, from engineering to high manufacturing density to JIS delivery. Not only Schwing-Stetter worldwide, but also companies such as Sandvik and Thyssen-Krupp have benefited from the cooperation. In a nutshell, this means: Let us discuss the joint synergy effects and use them whenever it makes sense. How does that sound to you?

DMaier GmbH is a family business with decades of experience in the metal industry. We provide customers with high-quality products and provide excellent customer service. Modern technologies enable us to achieve even more precise results by simplifying and automating our processes. Our company was founded over 25 years ago and has grown steadily since then. We are proud of our many years of experience in the metal industry and our reputation as a leading provider of high-quality products.

Weinmann is primarily for quality in small and medium series. But Weinmann is also diversity. Diversity in the processing of different materials such as stainless alloys, copper, aluminum, titanium or plastic. Diversity in the ways of module assembly. Diversity in the processing options and parts Dimensions: * Large diameter up to 250 mm * Great lengths to 1000 mm * Complex geometries * Micro turned parts * Revolver and rotational parts * Frästeile A diversity that makes you much easier. Especially when * Need many different parts * Change your parts often Block * all part families * Need "outliers" or special products.

We are specialised in the use of unalloyed and lightly alloyed steels. Thanks to our shotblasting, oxycutting, roll bending, and folding resources, the company can manufacture large machined steel structures and welded assemblies with unit weights of up to 160 tonnes. We pay particular attention to welding operations throughout the manufacturing process, using magnetic particle and ultrasound inspections. After the weld inspections, the parts may, depending on the customer’s requirements, be stress relieved using our annealing furnace. All work is performed in compliance with the drawings and specifications provided by the customer. Our company is specialised in the manufacture of mechanically welded assemblies and large machined parts. We are located in the Strasbourg region close to France, Germany and Switzerland. We have more than 30 years of experience in this manufacturing field and our customers include companies in the following sectors: - Manufacturers of civil engineering equipment - Crane manufacturers - Energy production - Manufacturers of machine tools and storage systems - Companies rebuilding large machines. To streamline the transportation of products manufactured in our workshops, we are able to pre-fit parts made with mechanical accessories. With the coming of this work, the parts are sent directly to the unit heavy packages from the port of Strasbourg. Our activities: - Welding up to 160 t - Thermal treatment of welded assemblies - Machining - Sandblasting - Painting - Assembling

Meislitzer Präzisionstechnik mainly produces customer-specific single components as well as prototypes and small batches for existing customers from a variety of industries including machinery and plant engineering, automotive, electronics, semiconductor, energy and medicine. Our employees are highly experienced in working with a complete range of specialized materials such as tool steels, carbides, synthetic materials and ceramics and have mastered many quite tricky manufacturing challenges so far. The combination of accuracy, speed in response, flexibility and straightforward approach has been our company’s strategy for success from the very beginning. For this reason we are in the position to supply our customer’s development divisions with machine parts, spares and prototypes within a short time. We guarantee delivery of premium and custom-made products in the shortest possible time. Our customers from various economy sectors are ensured fast and competent Service.

Werkzeugtechnik Niederstetten GmbH & Co KG sees itself as a reliable full-service supplier in the area of precision parts and forming technology. As a company of the international Würth Group, we are already a competent partner for well-known industrial companies in Germany and abroad from a wide variety of industries. From advice to simulation & design to the tool ready for series production - with us you get everything from a single source! We also manufacture precision parts in single and small series production based on 3D data sets and according to your individual wishes. In addition to the well-known production processes such as CNC turning and grinding, 5-axis simultaneous and HSC milling as well as spark erosion, we at WTN rely on new, innovative technologies such as "Precise Electrochemical Metalworking", or PECM for short. At WTN, we not only have all the technical requirements to process the entire range of materials from soft to hard. With our 100 employees, you will primarily come across concentrated know-how for the satisfactory implementation of your projects.

Our company stands out with expertise and years of experience in welding, adhering to high industry standards. Our production process is carried out according to established standards such as EN 3834-2, EN ISO 15085-2 CL-1, EN ISO 1090-2 EXC3. Welding of stainless steel, steel, and aluminum is conducted in separate halls, ensuring high-quality production in compliance with industry regulations. With a total production area of 4000 m2, our facility includes welding halls where a team of thirty qualified and certified welders, supervised by an internal welding engineer (IWE), operates. Thanks to our large capacity, we guarantee prompt and efficient delivery of both individual and batch-produced items to our clients. One of our factory's unique features is the ability to provide corrosion protection for welded products within the same facility, reducing the risk of damage during handling. We utilize advanced technologies such as painting and powder coating to ensure excellent anti-corrosion properties. Our factory is highly flexible and adaptable to client requirements. Currently, we work on projects in various sectors, including: Railway vehicles (construction parts, interior, exterior) Highways (steel structures) Medical equipment (enclosures, supports, cabinets) IT industry enclosures Mechanical components Industrial equipment Construction structures Metal components Feel free to reach out to us with your drawings and request for a quotation. Custom production and the realization of your projects with expert welding are our specialties.

HDO is European marketleader for decorative zinc, magnesium and aluminium die castings. In our headquarter in Paderborn, Germany and our locations in Slovakia and the Czech Republic approximately 900 employees produce more than 250.000 electroplated parts per day. Our customers are well-known manufacturers coming from the automotive, sanitary and household appliance sector as well as the industrial and building technology. Our family-led , mid-sized company, existing since 1956, maintains an active innovation management. This enables us to identify the challenges of the future and to develop appropriate solutions. The mapping of all manufacturing processes under one roof, from the initial request to the refined series die casting component, is what distinguishes us from our competitors. This high real net output ratio ensures a constant quality of all production processes, certified by IATF 16949 of course. Please find our privacy policy on our website: https://hdo-gmbh.com/en/data-protection/.

Stetorn is a young and dynamic company specializing in precision mechanical machining. Specifically, we specialize in: DESIGN Using 3D modeling software, we can design parts according to your specific requirements. MACHINING Turning, milling, laser cutting, bending, welding, assembly, and special machining upon request. HEAT & SURFACE TREATMENTS We can perform heat treatments on our parts, such as induction hardening, total hardening, and case hardening. Once the part is finished, according to the customer's specifications, we can perform cold-dip galvanizing, hot-dip galvanizing, nickel plating, and powder coating. TECHNOLOGY 3D modeling software, use of CNC machines, fiber lasers, and state-of-the-art welding machines. We stand out for: QUICK DELIVERIES On-time deliveries thanks to an efficient work organization. EXPERIENCE Although our company is young, we can boast over 20 years of experience in the mechanical machining sector thanks to the skills of our collaborators. FLEXIBILITY Ability to adapt to special requests and urgent changes. ON-GOING ASSISTANCE Technical support and consulting for every phase of the project, from design to production.

Deharde-Maschinenbau H. Hoffmann GmbH is a soundly established company in the metalworking industry with a workforce of over 150. The production of jigs and fixtures - as well as the construction of sophisticated high speed and low speed wind tunnel models - represents our particular fields of specialisation as contract manufacturers. Our scope of activities is traditionally very broad and also includes the construction of special-purpose machines and moulds.

Our main profile: Powder coating Precision Sheet Metal Punching, cnc Component manufacturing Corrosion protection We offer a complex service: - Planning the production of the components ponents surface treatment. Our company started as a small family business in 1997. The company started its production in a 300 m2 building with only an oven for powder coating. Today we have a 11,000 m2 - Production line with a 2000 m2 hangar. In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side. Due to our high quality standards, we were able to build long-term relationships with both national and international partners. Our company still operates as a family business, which helps us to keep administrative costs and our prices low. To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises. Our goal is to offer perfect services to our customers. Iso 9001 wiki

The HAM GmbH & Co. KG is an owner-managed medium-sized family. The core manufacturing processes of modern sheet metal processing (lasers, bending, welding). Programming The manufacturing process begins with the powerful 3D software, SheetAdvisor. This is specially designed for sheet metal processing. Settlements for manufacturing accurate modules are thus generated automatically. Using data acquisitions in all popular formats 2D or 3D designs are easily programmable. Lasers Two CNC Laser Cutting Systems (L5030 and L3040) guarantee a high degree of flexibility. Plates with a size of 4000x2000 or 3000x1500 mm are processed by these machines. In the steel sheets up to 25 mm material thickness and stainless steel sheets up to 20 mm still good cutting results are achieved. The 6 KW - laser steel sheets up to 6mm "scale-free" lasered, this guarantees good adhesion when coating. Bending The latest technologies guarantee you also in the bending process dimensionally accurate products. The measuring system ACB our V5230 checks when bending the dimensional accuracy of the angle and corrected automatically. Complex parts are the 6 - axes - easy to program stop. With an edge length of 4000 mm and a pressure of 230 tons, we can serve a wide range of products. A V130 with an edge length of 3000 mm and a pressure of 130 tons completes the machinery. Welding Excellent welder get your products in the form. At seven welding stations steel and stainless steel components are assembled and welded. The welding procedures are MAG, MIG and TIG. Certified staff guarantees high process reliability. Surface finishing Stainless steel parts up to a width of 1000 mm burr and we grind machine with a deburring machine from Weber. To ensure that your products get the right outfit we have partners that the parts coating.Powders, painting, priming galvanizing, galvanizing or radiation, these services are provided by external partners. Product range Individual production and small batch sizes to be as efficient as supplied small recurring series. Parts being manufactured for are: cover plate, cover, flange, housing, Abrasives, cover, flow sheet, shelf sheet, gutter, support tray, exhaust hood, exhaust duct, push units, end plate, end cover, final slide, crowd barriers, spacers, scrapers, weld on, weld flange, welding tongue, Anschweißscheibe , locking plate, drip tray, suspension, support, mounting plate, mounting plate, Ausbrennring, mounting plate, sheet metal, mounting bracket, containers, shim, bend part, sheet metal strip, sheet metal part, sheet metal pan, metal angles, sheet metal blank, visor, blind cover, base, base plate, base plate, bracket, C profile, roof panel, roof segment, cover plate, cover plate, spacer plate, distance

Dear Sirs; Our company is in the market since 24 years. We target our selves to create more competitive solutions for our customers. We will be very pleasure to present you our experience with LCC (Low Cost Country) advantages in Turkey for your product range that you could prefer to subcontract for your future benefits. We will look forward to receive your quotations to start our mutual partnership.Please do not hesitate to contact us For any affair. Best Regards Eyup Yildiz

Conal Ltd. is a manufacturing company and provides constructive and decorative aluminum profiles and sheets, usually close tolerances in the specifications. Further cooperation in the components and systems manufacturing, sourcing partnership in projects (OEM) and the development of products and the construction of prototypes The focus is on the machine CNC milling up to 7.00 x 1.25 m (4/5-achsig), automation in small part machining, partially automated plate profile cutting and processing (from 4mm plate) Summary: Machining: CNC milling, sawing, punching Machining (subcontracting) Pre-processing of aluminum extrusions Processing of rolled material Machining including procurement of materials (components manufacturing) Surface Engineering: Sand, anodising, painting System supplier (OEM) for best. industries Partnership in development / construction, AV

The blacksmith trade in 300 years Family tradition with the name Kuhla connected. Since 1990, the former blacksmith and locksmith developed into a modern metal construction company. Today we are active in the areas of metal, staircases, structural steel, stainless steel processing, industrial assembly and corrosion protection. Quality, reliability, flexibility and customer focus are essential cornerstones of our work. This is what a team of currently 10 qualified employees in planning, production and assembly. For more than 30 years, "Metal Kuhla" also for competence in constructive Staircase. Germany-wide reference objects bring the acceptance of our performance in this market segment expressed. Our clients include commercial clients, architects, contracting, property developers / general contractors and private clients. Metal Kuhla in the overview: * About 1800 square meters of production area * 15 employees currently * Of which 2 Project * 2 Master * 1 kaufm. Employee * 12 skilled workers, 1 trainee * Design and engineering with 3D CAD system * Recognized welding company * Delivery and assembly in Germany

Grafos Steel is a leader in the production of industrial stainless steel keyboards, control panels and chassis for their housing. In addition to offering a wide range of standard products, the company specializes in the constant development of tailor-made solutions for industrial computing, able to satisfy any type of customer request. In a constantly changing market, the patented technologies and products designed by the Grafos Steel technical laboratories are a guarantee of superior levels of quality, reliability, comfort and precision. This is the trademark of a company that continuously invests in research and development and constantly aims at improving production processes.