We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

APF specializes in contract machining on numerically controlled machines, ISO 9001:2015 certified. We have been in this business since 1980 and have acquired vast experience and expertise accompanied by constant investment in state-of-the-art machinery, especially in the turning sector, while maintaining relations with partners who enable us also to supply finished products. We are able to manage lots of all sizes, both machining customer-supplied materials and supplying the complete piece to the customer’s design. This is all achieved thanks to a large work-force, an impressive array of machinery, part of it robotic, band saws, and a large warehouse. We have always given priority to efficiency and professionalism, enabling us to grow over time and enjoy the respect of our customers.

Meccanica Hi Tech Srl, located in the industrial area of Ponte Rosso, one of the best and most efficient industrial centers of the North-East, is a reality that has been operating since 2004 in various sectors of mechanics providing client companies with valid technical and logistical support regarding production of mechanical components, managing the entire production cycle, with the exception of design, paying particular attention to the quality of the product and the implementation timing. MHT srl proposes to the customer the realization of mechanical parts finished to drawing, with the complete supply of the material (solid wood, fusion, electro-welded), and groups assembled according to customer specifications, including pneumatic and electrical systems.

Die-cast zinc Only the standard program of "precision die casting parts" now includes as 1500 products - and there are almost daily more: Components for closure systems, components for industrial housing, supply industry, processing, assembly manufacturing Examples: Handles - troughs - case parts - Hinges - Corner connector - Fasteners - Fasteners Machining Excellent products of the highest quality: the production of complicated machining parts, components or entire modules is the most modern machinery manufacturing technology: Precision machining parts made of all materials, stainless steel turned parts, finishing, finishing by thermal and galvanic treatment, assembly manufacturing, packaging and order picking Aluminum die casting / die forging This allows the spectrum in the field of aluminum production is best described: aluminum castings, die forgings, machining, assembly manufacturing Examples: spring plate - Motor Mounts - flanges, connectors Drive Technology In the area of drive technology gears, complete axles and transmissions parts for special vehicle to be manufactured. These are our own product development as well as the extensive capabilities of the ILS manufacturing network from rapid prototyping to assembly available.

Chiarini Tornerie begun the activity in 1996 as subcontractor for precision turned parts. Thanks our continuous growth and investement, now we operate a wide range of machines and we are able to offer CNC Turning operations with very small tolerancies in small and medium size lots. We are specialized in hard turning. Diameters: from 25 mm up to 600 mm Lenght: from 10 mm to 1000 mm Materials: carbon steel, stainless steel, aluminium Chiarini Tornerie enjoys an excellent reputation with their existing customers for service and quality at competitive prices. We can assure you flexible deliveries according to your requirements and your needs.

Over 300 employees, a plant that is designed according to the latest knowledge of process control and material flow, as well as an exceptionally high level of vertical integration in line with well-trained employees ensure that the sum of skills and reliability applies at every point in the process chain. Our high-precision parts serve well-known customers from the following industries: automotive, mobile hydraulics, electrical drives, mechanical engineering, sensors, medical technology

The John Banholzer Metallwarenfabrikation GmbH is an owner-managed, medium-sized companies in Berlin, which has been operating for more than half a century as a manufacturer of forged parts, especially for the automotive industry. Our core competence lies in the metal forming. We manufacture high quality stamping, bending, - and drawing parts of varying difficulty in a variety of lot sizes. With our modern stamping and transfer machines with a pressing force 50-320 t we can edit tape material comprises from 0.1 up to 6.5 mm for all common steel, stainless steel and non-metal materials and even stamping gold-plated circuit boards as well as two deep drawing presses 115-250 tons of force also manufacture deep drawn parts. To our manufacturing range includes the manufacturing of sheet metal and welded assemblies by welding and assembly fixtures. The basis of our performance in the series production represents the tool and fixtureThese include conception, design and construction of optimally designed for the purpose of tools in close cooperation with our customers. Following these ideas, we build bending, embossing, cutting, thermoforming, and Progressive and transfer dies. We also manufacture prototypes, pre-series and patterns cheap and quickly with the help of standard tools, devices and support tools. Every day it inspires us, that for many years then, leading companies in the automotive industry such as Daimler and ZF at us, and customers from other industries such as Bosch-Siemens in the household appliance industry, Otto Bock HealthCare from the medical and Siemens in the energy trust us. In recent years we have expanded our production portfolio and expanded our capacity in the hybrid region, especially in case of power rails for batteries.

Springs Group Srl is a company specializing in the production of springs for industrial applications, which bases its expertise on the over fifty-year experience of the people who actively operate at a technical, commercial and production level. Springs Group Srl is a modern and dynamic company with a flexible and efficient structure, qualities that allow the company to be a reliable and preferential partner of prestigious groups in different industrial sectors, national and international. All our items are used in the electromechanical, hydraulic, earthmoving and agricultural machines, automatic machines, industrial plants, pneumatic equipment, hydraulic pipeline servo motors, vibrating screens, railway and automotive applications. Springs Group Srl in its production facilities has a technologically advanced fleet of machines that, combined with the great experience and professionalism of its staff and the use of high quality raw materials, allow the group to be a reliable partner for its customers. Springs Group Srl thanks to the considerable experience gained in the design and manufacture of the springs is able to satisfy the most diversified requests. We work with a Quality Management System, the company is certified according to the UNI EN ISO 9001: 2015 standard.

IMG (industrial Manufactoring Group) srl operates in the field of light, medium and heavy carpentry, with the possibility of performing machining operations with CNC machines on the same carpentry components and on precision finished components of various types. Turnings, milling, boring in addition to the normal basic processes. The aim is to guarantee extremely competitive quality and price standards. We are ISO 9001, UNI EN 3834-2 and EN 1090 certified with an international certification body (Beureau-Veritas) We are looking for serious and consolidated relationships that allow us to achieve the best price / quality ratio for all construction companies through partial relocation machinery and plants. We have direct experience in sectors such as those of coils treatment plants, for aggregates treatment plants, for waste treatment plants, for foundry plants, for steel plants, for corrugated cardboard production plants, for pipe bending plants and machinery, for production plants polyurethane sheets ...... and many other sectors. The company is located 15 minutes from the center of the Moldavian capital Chisinau and is approximately 15 minutes from the only international airport in the Republic of Moldova. The first levels all speak Italian, Russian and Romanian.

Company Overview Tovicar S.r.l. is a precision mechanical workshop based in Zogno (BG), operating since 1977 and specializing in subcontract machining for demanding industrial sectors. We are experts in CNC turning, milling, mechanical assembly, and the production of custom parts based on drawings, providing tailor-made solutions for every production need. From single prototypes to medium series, we guarantee precision, punctuality, and technical support at every stage of the process. 🛠️ What We Do High-precision CNC turning and milling Mechanical assembly of components and subassemblies Rapid prototyping Machining of metal and plastic materials Dimensional inspections and quality documentation on request 🎯 Why Choose Us Over 40 years of experience Advanced machinery and technology Flexible production: from single parts to small/medium series Technical support during industrialization Reliable delivery times and quality standards 🤝 Our Customers We work with Italian and international companies in sectors such as: Industrial automation Packaging and food processing Hydraulics and pneumatics General mechanical engineering

For decades, we are among the leading companies for punching, pressing, stamping and machining parts as well as assemblies. Our production facilities are located in Wildenberg and herb home at the Jagst and in Surany, Slovakia. To manufacture the parts presses are used with benefits 8-630 tons. We process steel, carbon steels, aluminum, stainless steel and non-ferrous metals in material thicknesses of 0.1 mm up to 18 mm and in bandwidths up to 1,000 mm. To pre-production testing of newly developed products, our prototype produces the corresponding prototypes, small series or unique pieces. In the company's own tool we implement your request to precisely and also in the quality you can expect from us in detail. For series production complex stage, progressive and transfer dies are used. A mechanical finishing of all products is possible in our turning and grinding. Our hardening also provides several ways to highly stressed parts post-treat. Convince yourself of our performance and quality.

Precision Turned Parts - stainless steel as well as all machinable materials, preferably stainless and acid-resistant stainless steel - from 1.0 mm to 250 mm diameter parts length up to 450 mm Precision milled parts - to cube 400x400x400 mm Assemblies - Partial and complete assembly Standard Parts - from all machinable materials Heat treatment - and galvanic surface treatment according to customer

CONCEPT As a service provider in the machining segment, ALCUTEC GmbH & Co. KG specializes in high-quality and customer-oriented processing of aluminum. Efficiency, accuracy, certified quality and innovative technology make ALCUTEC one of the leading companies in this field. As a service-oriented company ALCUTEC can take over all common surface treatment (eg anodising, chromating, hartcoting, paint, nickel, teflonbeschichen, glass bead blasting) the marking with laser and a variety Module assembly. ALCUTEC is equipped with the latest CNC machining technology and the corresponding CNC metrology. It produces CNC milled parts made of light - and non-ferrous metal in small, medium and large series range that meet through various mass finishing process (barrel finishing) the highest aesthetic demands. SERVICES Materials Aluminium AlCu (eg 2017, 2024, 2219), AIMg (egB. 5005, 5056, 5083), AIMgSi (eg 6005, 6012, 6060, 6082), AlZnMg (eg 7019, 7022, 7075), various special alloys such as PLANAL, FORTAL, MIC6, UNIDAL and ACP ect. Copper: E-Cu (Cu-ETP/CW 004A), SF-Cu (CW 024A), SE-Cu (Cu-HCP/CW 021A) Brass CuZn 15 (CW502L), CuZn 37 (CW508L) CuZn39Pb2 (CW612 N) Bronze: CuSn6 (CW452K) Plastic Delrin (POM), polyethylene (PE), polyamide (PA), Teflon (PTFE), epoxy fiberglass (HGW2372, FR4) Products: From the smallest part to the machine component with dimensions 500x500x500 mm our manufacturing technology are limitless. Our range includes CNC 5-axis milling parts such as covers, adapters, stop, shoot, fasteners, brackets, guides, bearings, swing, cabinet, carrier, base, sockets, heat sinks, bars, plates, prisms, angle, centering, visor, motor mount etc. Processing methods: Aluminium-/Leicht-und non-ferrous metal processing, CNC 3-axis milling, CNC 4-axis milling, CNC 5-axis milling, aluminum machining, CNC metal processing, CNC metal machining, precision - milled parts, Vibratory Finishing Machines for deburring (Trowal), assembly work. Heat treatment, surface coating and labeling: We offer anodizing, chromating, hartcoting, paint, nickel, teflonbeschichen, glass bead blasting and laser label. Certified quality: An internal quality assurance with all the classic test and measuring equipment ensures the delivery of flawless workpieces. Accuracy, efficiency and punctuality are the result of a well tuned workflow. Our workmanship meets the highest quality requirements. Customer orientation and a fast implementation make the ALCUTEC GmbH & Co. KG is a reliable and competent partner.

HENKEL company is mainly in the field of surface technology for stainless steel and other high-quality metals and metal alloys employed. This includes chemical etching, electropolishing, passivating, cleaning, Derouging and re-passivation of stainless steel, nickel and nickel alloys, aluminum, copper, niobium, titanium, zirconium, carbon steel, etc. for the pharmaceutical, biotech, chemical, semiconductor, and food- and beverage industry as well as for the aerospace and medical technology. The above method for the surface treatment can be applied by Henkel also at the customer site. These include electrochemical polishing and cleaning of containers (Derouging) and (re-) passivation of plants in the chemical, pharmaceutical and biotechnology industries. With trained personnel and specialized equipment such work can be carried out in Europe.

Professional support in planning, design and production in mechanical engineering and precision engineering.

Spring production with wire or band: stainless and carbon steel, brass, bronze, iron.

Our key competences are gearing, CNC turning and milling of steel-, aluminium- and copper alloys, as well as numerous cast alloys, drop forging, welding up to the manufacturing of special drives, couplings and machine components. We deliver as well single components and modules according to the drawing of the customer, as well as drive- and machine-elements ready for installation. We manufacture in ISO 16949 / ISO 9001 certified factories customer related for many industries such as: • Machine – and plant engineering • Drive technology/ gear manufacturing • Vehicle construction/automotive • Agricultural machinery/hydraulics • Production of steel, cement, petrochemicals and energy

Punching, laser cutting? Or both? For us no question, you can at any time that you choose for the best manufacturing process. Our combined Stanz-/Lasermaschine, TC 600 L with diverse manufacturing capabilities in sheet metal processing meets the diverse needs, regardless of whether items or series. In addition to punching and laser cutting of contours and openings is possible in one clamping gills, eyelets and beads into shapes and threaded into rolls and holes to sink. Our fully automated TC 600 L with integrated SheetMaster enables an economic production of large numbers by the possibility of self-loading and unloading of workpieces. That is, we are your competent partner in the manufacture of punching and laser parts and finished fast and economical for you.

Welcome to Erdel Engineering Your partner for concept development, design and manufacture of mechanical components and assemblies.