The company was founded in 1986 in ASEDO Dombühl We employ 120 highly motivated employees, mainly metal and electrical workers in two shifts. Our key business principles are: Use of resources by qualified and motivated employees for the benefit of our customers, as well as to our company The business concept is based on independent, responsible employees who get involved with fun at work and maintain a partnership, human interaction with each To maintain and expand through their own goal-oriented training and education continuity and quality Their top-quality products to manufacture. To achieve this, we pay attention since time immemorial in all areas on the consistent implementation of this principle. This supports our existing since 1995 certification in Quality Management, since 2001 according to DIN EN ISO 9001-2000

Our company was established in 1955. The operation is continued in the second generation since 1979. Nearly 700 companies are among the world our satisfied customers. About 45 employees are currently ready to implement your ideas and wishes. Highest customer satisfaction and total quality control are our objectives. State of the art production and measurement equipment in a new functional, clean production building support our young team of professionals in this endeavor. Gentle Rochester dealing with cutting oils and cleaning agents reduce the environmental loads at a very low level. Small and medium series, especially in difficult to machine materials, are our strength.

Our registered office is located in Schönheide, a nice industrial and business place in western Erzgebirge (Ore Mountains) (New Federal States). My company is located since the beginning of 1992 in a newly constructed factory building and is equipped with modern technology. By the use of two CNC- tool milling machines (maximum travel 1.50 x 1.00 x 1.00 m), two HSC machining centres and a 5 – axle – CNC – milling machine we are able to work effectively. The operations are prepared by modern CAD / CAM workstations like: Pro Engineer, Gib-Cam, Depo-Cam and Auto-CAD-Mechanical Desktop. By means of these systems we are able to accept and process data of our customers in all common formats in order to carry out thus every machining task with the most effective milling strategy. We are 17 employees and produce synthetic and metal patterns, permanent moulds, tools and jigs as well as complete pattern devices and match plates. Should you be interested in a cooperation, we would be very grateful if you include us in your circle of tenderer.

MGC Subcontracting is a dynamic and well equipped in machining and manufacturing rolls. A combination of a well qualified staff, modern machinery and an effective organization results in high quality products at competitive prices and within the agreed time.

Evektor is an international company with core business in: - Aerospace design & Aircraft production - Automotive design - Design in Civil engineering & Consumer industry Evektor belongs among the leading companies in the Czech aircraft industry and is one of the world‘s biggest manufacturers of light sport airplanes. Evektor headquarters are located at the international airport in Kunovice - region known for a successful history of the aerospace industry since 1936 Evektor has 400+ employees and sales network in over 40 countries worldwide. Company has devices for machining, sheet metal processing, sheet cutting, rapid prototyping, upholstery process, engineering, services etc.

Kamat is a medium-sized company that manufactures high-pressure technical components and equipment, especially pumps and markets around the world. On Witten All products are designed, built and marketed. The vertical integration of production at Kamat is very high, as is only to provide a maximum level of quality.

HddsMachining has originated from the development of the prototype department of HddSurgery company, with a goal to offer our clients designing services, prototype development solutions and final product manufacturing using high-end software and hardware.

STL company started its commercial career in 2007 with the name ATAK Automation and change the name and vision at 2014 as STL AUTOMATION ELECTRIC MACHINE CONTROL SYSTEMS SOFTWARE INDUSTRY. It still continues to operate with new face. • STL became a group company at begining of 2016 as STL Automation and STL Robotic • . • STL Robotic has 17 employees. • Project Coordinator-Design Expert • Sales and Project Manager • Technical Manager and Programming Expert • 4 Engineers (1 Engineer for Sales, 1 Engineer for documentation, 2 Engineer for Manufacturing) • 3 Office Workers • 4 Electrical Technicians • 3 Mechanical Technicians • STL working with outsource companies for accounting department, Import&Export issues and HR department. • 10 Workers, 3 CNC Machine, 2 Drilling Machine, 2 Milling Machine Hot Plate Welding Machines  Leakage Test Machines  Assembly Lines,  Cartesian Robots  Robot grippers  CNC Loading&Unloading Robots  Rotating Table Automation Systems  Pick and Place Applications  Measurement, Control and Cooling Fixtures

We are a company dedicated to CNC Machining (milling and turning). In order to meet our customer's needs we also offer various services such as Surface Treatments, Heat Treatment, Small welded constructions, and final quality control. We labor in the Metalworking area, producing parts, accessories, components and machined devices with the precision of Computer Numeric Control technology (CNC). We offer a excellence service combining a high level of knowledge, innovation and quality. Since it was founded, LTG Tech has been registering a very positive development, as the factors price, quality and deadline fulfillment played an essential role to improve and mantain customer's satisfaction level. The quality of the product is the main requisite for our Shopfloor. The focus on quality challenge us to produce better by minimizing the rework and reducing the production time. We believe that it's posible to produce a good part at first so we pursuit perfection through the continuous improvment of our processes and service. We have all the metrology equipment needed for dimensional checks, with a very wide range of equipment. Their calibration follows the requirements of the applicable standards, ensuring the verification periodicity defined in the calibration plan. Description of measuring equipment: Outside micrometers, inside micrometers, threaded gauges, pass / non-pass gauges, calipers, column and comparators and standard gauges. It is also possible to provide three-dimensional measurement reports on customer request.

BMS GmbH ,,, Blech und Metalltechnik Schreiber Medium-sized family company manufactures complete assemblies, fixtures, welded parts, mechanical production, machine enclosures including assembly, including powder coating. Construction in the house.

Briefly about RiWo-Gesamt: We have our production facilities in Austria, Croatia and Bosnia. Organization, assembly, quality assurance, etc., is controlled and monitored in and from Austria, QA and assembly. Croatia: welding, milling, turning - LG1 Bosnia: From 100 pieces. Turning, milling, edge - welding.

Your partner in the field of CNC processing of metal and machining technology. We manufacture individually manufactured high-tech products, prototypes and small series. We work for industries that require complex components with high precision.

Machining in the following dimensions for the most demanding contours and radii is possible at Alupro / the right machine for every application / the right machine for every application: 5-axis machining 5-axis machine with linear axes for maximum precision Swivel rotary table with interchangeable pallet Interference circle = 1100 mm in profile machining dimensions of: x = 16000 mm y = 950 mm (2000 mm) Plate processing with vacuum plate / suction table x = 1500 mm y = 1000 mm

Rovigo CNC Technology is a young company from Croatia, which started production in 2015 and currently employs 10, mainly young, qualified and motivated employees. With the desire to expand our production, we would like to offer you our services in the area of contract, individual parts, small series or series production, using CNC-controlled machining technology. At the moment we only process aluminum in the usual material qualities. The processing sizes in x up to 3,000 mm. Machine park: Machining center 3-axis Pinnacle LV116 x = 1100, y = 600, z = 600 Machining center 4-axis Matec-30HV x = 3000, y = 750, z = 400 5-axis machining center DMG / DMU65 monoBlock x = 650, y = 650, z = 560 Machining center 3-axis Haas VF 9/40 x = 2134, y = 1016, z = 762 Programming and data formats: Solidworks CAD & SolidCAM 2.5D system 2D: -.dxf and -.dwg 3D: -.sldprt (Solidworks), -.igs and -.step Control: Our parts are constantly checked by our employees on the machines during production. Every part is nevertheless additionally checked and approved by our quality officer for the final inspection before delivery. In addition to the usual measuring equipment, we use our 3D coordinate machine to check the dimensional accuracy Measuring machine BROWN & SHARPE GAGE 2000 3D handheld / software PC-DMIS Measuring range 457x508x406 quality For us, quality means executing every order on time within the agreed delivery time, in the required quality and within the calculated budget. surfaces All parts can also be anodized in natural aluminum or in a color from gold to black. We would be delighted if you were interested in working with us, we look forward to your inquiries, and are at your disposal for any further questions or information at any time! surfaces All parts can also be anodized in natural aluminum or in a color from gold to black. We would be delighted if you were interested in working with us, we look forward to your inquiries, and are at your disposal for any further questions or information at any time!

Created in 2015, Gannet Machine Works is a Vacuum WorkHolding & Subcontract Manufacturer for high precision CNC machined technical parts, working for the Marine, Rail and Industrial sectors. We also provide surface treatment and pre-assembly as well as Engineering services such as: Part design & Development, simulation, testing and prototyping. Website & Online Store: https://www.gannetmachineworks.eu/

Small company from Slovakia with 12 years experiences in production parts for motorsport, automotive, common machinery and aerospace. From idea, sketch, throug CAD, CAM to real product from aluminium alloy, plastic material, fiber-glass, carbon to steel and inox final parts. From prototype production from 1 part to serial production.

“Dniprovsky special tools plant” LLC the largest company in the CIS specializing in the production of metal cutting tools (tool holders for turning and grooving, tool blocks, blades, mill bodies, drill bodies and atc) and accessories for enterprises in the metallurgical and pipe industries. For many years, our factory has provided factories in Ukraine, Russia, Belarus, Poland and Germany with standard and special metal cutting tools of European quality. The average staff count of the company is 150 people.