In our production we have machines with closing power from 340t to 900t. All machines are automated with a robot and a trimming press (cell). We can also offer all types of casting and mechanical processing (drilling, threading, milling, etc.).

Engineering, shredders, cable winches. Turning, milling, CNC machining. 3D CAM EZCAM Engineering (De Koning Engineering) 2D and 3D

The COHN coil springs + equipment manufacturing GmbH produced in a more than 70-year tradition not mass produced, but individual and small productions. An order therefore includes no more than 2-50 pcs in individual and small productions. But of this, our company also stands for the timely and detailed manufacture of the products. Our company operates with 16 trained and quality conscious employees pure contract manufacturing and works in a two-layer system from 7:00 bis 23:00 clock. In addition, we supply our product range "feathers" which among other things Laser, the dental and optics industry.

Index doo Gracanica is tatig since 1986 in general mechanical engineering. In cooperation with Bosnian Waermekraftwerk, mines.

Our young and dynamic company located in the industrial area Rodgau / Jügesheim, about 30 km south of Frankfurt From here we reach customers and suppliers alike to directly over the adjacent A3-A5-A45-A66. In 2001, of the Feinwerkmechaniker masters Harald and Jürgen Pahlke in its present form founded as a private company, comprises our activities, manufacturing and production of stamping, sheet metal and bending parts for industrial and craft, the associated tooling and assembly of a few Assemblies according to customer specifications. With regard to the close cooperation with our customers, in particular, short communication channels and reliability distinguish at all levels. With our team we ensure smooth processes from inquiry to delivery.

Contract Manufacturing Turning Drilling Milling on CNC welding conventional machines. Turning length 50 mm - 6 m turning diameter 50 mm - 1 m CNC turning diameter 50 mm - 750 mm CNC milling on 5-axis machine 4000 x 2500 x 2000 Transmission case machining 4000 x 2500 x 2000 Weldments Welding up to 1000 mm length 5000 mm

If extensive knowledge combined with years of experience, perfection is the logical consequence. We offer in metal and plastic processing: • Quality without compromise • Flexibility and individuality Even when it comes to realizing quite exceptional requirements, we are able to find solutions that make quality products arise. Be it. Steel, non-ferrous metals, plastics such as Torlon, PEEK, PE, POM, PTFE and acrylic or composites

The company TKM specializes in the manufacture of machine parts of all kinds, complete machine assemblies, construction of tools and devices, to complete special machines. We execute up to 3000 mm in length capable milling, machining parts up to a diameter of 600 mm and a length of 3000 mm length, others strengths are precision production by surface grinding, cylindrical grinding and jig grinding, and Lehrenbohrwerksarbeiten.

Precision turning, Decolletage- and milled parts

Industrial technology, mechanical engineering

THE BEST START WITH A THOUGHTFUL DESIGN Brilliant ideas are born every day. Whether they also lead to success depends on many factors. To start with the preparation. How much a part for a machine, vehicle or installation will cost and how long it will continue to perform is largely determined by the design. As experienced engineers and machine operators, we know what to look for when developing a part. We don't just design, we help you choose the material and choose the best production method. If you want, we can even make a prototype, so that you can test your product in practice. Choose a thoughtful design! Call or email us at or info@eindhoven-engineering.nl.

CNC milling and turning of individual parts and small to medium-sized series. With the most modern tools, even complex parts are manufactured precisely and on time. Design, manufacture and assembly of assemblies

Turning and milling of single parts and small series + CAD constructions. Conventionally turning diameter 500 x 300 / diameter 300 x 1000. Milling Conventional 600 x 400 x 400. CNC milling 3 axis simultaneous 625 x 525 x 500.

Production of aluminum, zamak and plastic molds. mechanical machining on die-cast parts

IWN GmbH & Co. KG specialises in the development and production of high-precision products for applications in the fields of hydraulics and pneumatics as well as in innovative system solutions and special components. Our company focuses on the consequent orientation towards customers' requirements. It is the endeavour of our committed employees to meet the requirements of our customers. Active customer orientation, highly motivated employees in combination with the latest production technology: Our guarantee for the implementation of our slogan "Technology for You!" IWN stands for innovative ideas, lean processes, qualified employees and cutting-edge technologies for mechanical machining and installation. IWN flexibly develops and produces customer oriented series products in small and medium numbers while placing high emphasis on quality. IWN supplies its customers in the industry and automotive field on time, based on diverse logistics concepts. IWN enjoys long-term customer relationships based on a spirit of trust, and will continuously further develop these contacts with existing and new customers. Intelligent Systems: We develop and produce solutions in cooperation with and according to our customers' specifications. We design and produce tailor-made products and assembly groups for the most varied fields of application both efficiently and at low cost, while remaining in constant contact with the specialists of your technical department. We are in a position to produce first-off samples and prototypes at short notice. Use this advantage and distinguish yourself from your competition as early as in the planning phase. Order-based Production: From the development phase on, we produce high-precision turned and milled parts in a process reliable manner and with a maximum degree of realisation know-how. Highly specialised, competent employees, modern machines and equipment and many years of experience form the basis for our confidence to being able to meet your requirements. Batch sizes range from 100 to more than 500,000 pieces.

We are Comapany which create Value for our coustomers according to requests. Very often we give more than others just by fast answers. Like for prototype parts.

Franz Schürholz GmbH is an owner-managed family business in the third generation. In 1946 Franz Schürholz founded the company in Menden. Initially, household goods, kitchen appliances and agricultural supplies were produced. In the following decades, the company developed into an innovative partner in the cold rolled profiles and stamping products divisions. Today, our products are as diverse as our customers. Industries from A to Z rely on the quality of Schürholz: automotive, construction industry, fitting technology, electrical and filter technology, crane construction, shopfitting, lighting industry, mechanical engineering, furniture and office furniture industry, connection technology and other future industries. Continuous growth required the continuous expansion of production areas and the relocation from Menden to Wickede - the current location of the company. Here, 30 qualified employees using high-quality materials and the use of modern machinery guarantee the recognized quality of our products.

At our company there are three segments of activity. Indsutrial knives 10 years of experience in this sector ensures the quality and help to choose the right material. We can also start the manufacturing based on the sample knife if you don’t have any drawing or document. Industries: recycling, packaging, wood chipper, paper, plastic, rubber, etc. Knives description: chipper knives, slitting knives, metal sharers, dish knives, top knives, bottom knives, crush cutter, etc. Zinc die casting Our company is a zinc foundry as well. We use FRECH hot chamber die casting machine to produce parts. Upon customer requirements we can make tumbling, deburring, machining, tapping or coating of the casted parts. In general we use ZAMAK5 alloy but other alloys are also available. Single part producing and special purpose machines If you have a special requirement for a special operation in any kind of industrial sector don’t hesitate to contact us. We will find a solution to make your process more effective or just simply more easy. After the CAD design we make the target machine for you. We produce machine spare parts from 1 piece as well (turning, machining, grinding, heat treating, etc)

ProEn Präzisionstechnik GmbH is a supplier in the area of production and development of mechanical components, assemblies as well as prototypes and fixture construction.