The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

SA.BI Foundry, founded in 1968, has undergone various phases of development throughout the years and has become a leading company in the field of the production of grey and spheroidal cast-iron castings also with additional machining. The current production capacity is 30,000 tons of ductile and grey melted cast iron. The flexibility of its production and logistic structure allows SA.BI to be competitive in the production of cast-iron castings of a weight between 4 and 700 kg in medium and large series. The company, certified ISO 9001:2008, has a quality control system in each production cycle, starting with the selection of incoming materials and going through up to the despatch of the machined castings.

With Connfix GmbH as a system supplier, your processes are optimized and cost savings achieved. Together with our network partners, we produce customer-specific drawing and special parts in the field of turning technology, casting technology, stamping and bending technology as well as assembled rubber and corrugated metal hoses, which are produced in our factory. We accept the most varied of requirements and support you from the development of the prototype to series production. Our customers already include well-known OEM manufacturers (automotive, plant, machine and shipbuilding) References can be sent on request.

The Italian COMPANY Musto et Bureau Srl is known worldwide as one of the main suppliers of mechanically welded steel crucibles for casting magnesium, zinc and non-ferrous alloys. Its customized products are known throughout the world with the brand name DITTA MUSTO. As a leader in the magnesium and zinc fields, our production enjoys an excellent reputation for its high specialization and competitive costs. Over the last 10 years, Musto et Bureau Srl has developed a continuous improvement in production processes in order to raise the level of quality and durability over time. Musto et Bureau Srl tries to apply all new technologies in production and inform customers on new materials. Musto et Bureau Srl works to support customers in all their needs and collaborates with them to achieve a position of world leadership.

We are a family owned light alloy diecasting foundry founded in 1974, which works in the ISO 9001: 2015 and IATF 16949: 2016 certified quality management system. The company has 2 melting furnaces and 11 die casting machine, from 400 to 1100 tons, all fully automated, and is able to do all the necessary processes to provide the customer with finished parts ready to be used in production adding all kind of machining, leakage controls, 3D tomography, painting, and many others. We have a long experience in the die casting of for chairs, and we collaborate with the major Italian manufacturers. In addition, recently, to ensure a complete service to the customer, it acquired the company Svea Stampi, which specializes in the construction of highly complex molds for plastics and aluminum die casting with an ISO 9001: 2015 certified quality management system. With its experience of over 35 years, Svea Stampi can offer you multiple services, including the choice of the most suitable materials for the specific product, choice and study of the type of feeding through the simulation of filling, solutions for the simplification of the mold, molds for prototypes, dimensional surveys, as well as after-sales assistance and modification interventions. We design molds with dimensions up to 1450 x 1200 mm for presses with clamping forces up to 1500 tons.

“Dniprovsky special tools plant” LLC the largest company in the CIS specializing in the production of metal cutting tools (tool holders for turning and grooving, tool blocks, blades, mill bodies, drill bodies and atc) and accessories for enterprises in the metallurgical and pipe industries. For many years, our factory has provided factories in Ukraine, Russia, Belarus, Poland and Germany with standard and special metal cutting tools of European quality. The average staff count of the company is 150 people.