The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

In the aluminum sector, we at Thöni focus on sustainability and resource-saving processes in the production of high-quality aluminum components. Thanks to our highly trained specialists and highly automated production processes, we are able to consistently guarantee the high quality of our products. From idea to product development to highly refined products, we at Thöni reliably deliver everything from a single source. Your competent and reliable partner when it comes to extruded aluminum products.

In addition to our own special machines, which we manufacture in-house, our service also includes the production of prototypes, individual and small series parts as well as the assembly of entire components and machines. In order to produce complete assemblies and complex production parts, we can rely on long-standing competent partners who support us with services such as cylindrical and surface grinding, eroding, broaching, sheet metal and welding work, and electrical engineering. Of course, we can carry out all heat and surface treatments on request.

Textile logistic and solutions. Trucks to load/unload warp beams and fabric rolls on looms. Winders and rolling machines

VR Technology was born from the synergy of a group of entrepreneurs who have been operating in the steel sector for decades to allow them to expand their range of services to the customer. Thanks to its technical structure and thanks to its machinery, the company is able to act as the sole interlocutor for the customer as it is able to manage the entire production process and provide "turnkey" orders. VR Technology focuses its attention on the construction of structures for the most diverse fields of use, such as: o Cableway (station structures, frames, supports, trunks, trees, pulleys and spokes); o Lifting systems (gantry cranes, bridge cranes, jib cranes and marine cranes); o Machine tools (press bases and bases); o Hydroelectric (Pelton, Francis, Kaplan boxes, distributors, suction and bifurcated pipes); o Waste treatment and disposal plants (tanks, agitators, ovens, boilers, chimneys, heat exchangers and combustion chambers); o Civil and industrial constructions (welded beams, complete structures and columns); o Fixed and transportable rides; o Production of design details including mechanical processing. Mechanical processing is the cornerstone of production activities. Thanks to its flexible structure, the company can vary its production according to the needs of each customer. VR Technology relies on qualified welders according to UNI EN ISO 9606-1, the entire welding process is performed in accordance with UNI EN ISO 3834-2. The companies that Vr Technology relies on for non-destructive tests provide 2nd level qualified personnel in accordance with UNI EN ISO 9712. The company is undergoing EN ISO 9001 certification. We remain available for more detailed information, or for any requests for offers.

Arfino specializes in the production of precision-turned components in brass, bronze, and aluminum, with a particular focus on lead-free alloys. The most refined surface finishes and the tightest tolerances emerge through the use of the highest quality machinery and tools. The company, aware of the need to systematically and documentedly ensure a high quality standard for its products, has established a Corporate Quality System that meets the needs of its customers.

decolletage company located in the heart of the valley of the Arve cradle this business for over 100 years Strong experience in the manufacture of machined parts high clarification small medium and large series of 2mm diameter 32mm diameter for various sectors such as aerospace automotive industrial medical fixing etc ... Respect for the quality of the time and price are our quotes

The CEBES a.s.company was established in 1999 and with a considerable portion of its production it carries on a tradition of more than 60 years in manufacturing commutators, brush holders and slip rings at MEZ Brumov Company. The company also carries out repair of commutators, brush holders and slip rings. The CEBES a.s. company has implemented and operates an Integrated Management System. The company holds certificates for both the ISO 9001 Quality Management System and ISO 14001 Environmental Management System.

The company Alpha Sigma GmbH was born from an idea to produce inexpensive and environmentally friendly fiber composite components without sacrificing weight or stiffness. During his studies at the West Saxon University and beyond, Fabian Liesch worked on the development of a technical and economic series production of basalt fiber composite components. The founding team of Alpha Sigma GmbH worked in prototype construction for many years and was involved in Formula Student in addition to their studies. With the technology developed by Fabian Liesch and his economic skills, he decided in 2013 to found a company together with a partner. With the application to the Saxon Development Bank for a technology founder grant and approval in summer 2015, another cornerstone was laid for the company. The company Alpha Sigma with the legal form GmbH was founded in Zwickau in November 2015. Since then, the company has been growing continuously. performances Do you need support in implementing your project from the drawing to the finished product? Make an appointment with us in-house! Let yourself be impressed by our expertise! We offer our customers both the production of fiber composite components and advice as a partner at your side when it comes to implementing a project. Right from the development phase, we implement your or our designer's wishes technologically. In doing so, we have focused on rational and cost-saving manufacturing methods that are in balance with the required framework conditions. The right material for the components, as well as the molding tools, is adapted to the customer's requirements. Molding tools made of PU foam are used, as well as aluminum, steel or casting resins. The molding tools are designed and manufactured in-house according to design specifications. For oversized tools, we have competent partners who can also produce oversized molding tools by cutting. The components are manufactured by trained personnel and high quality standards in individual or series production. Components are primarily manufactured using a resin infusion process, which has the advantage that the components can be manufactured at a constant temperature and continuous monitoring. This results in a high reproducibility of the results. It is also easy to use different resins and/or fibers in this process. In our company, we process natural fibers such as basalt, jute, hemp or flax as well as technical fibers made from carbon, high-performance polyethylene, aramid or glass. We are also able to produce composite components in accordance with fire protection standards, i.e. non-combustible fiber composites with high strength and temperature resistance. As sandwich core material, we use commercial Lantor materials via 3D Core, but also honeycomb structures and alternative materials, such as paper honeycombs or wood. If you need a design of components or molding tools with FEM analysis, we will be happy to assist you as a competent partner. Project support at home and abroad is also part of the portfolio offered by Alpha Sigma GmbH. The trusting handling of your data plays an important role, especially in prototype construction. We do justice to this fact in many ways. Talk to us personally and confidentially. We will find the right solution for your problem.

Serres Gear Factory has been a family business for over 50 years, always combining tradition and modernity in its services and products. Therefore, the Serres gear factory is always very close to its customers and suppliers, as well as the delivery of high quality products.

Traditionally A-Plast has been working since 2001 to become an important player of the Central European plastic industry and is proud to be called the sheet specialist. We are known to be wholesale and retail distributors of semi finished plastic sheets, tubes and rods made of POLYCARBONATE, PMMA, PET, HIPS, PVC, ABS, PP, PE, etc. Throughout the years we have trained ourselves to learn your most diverse demands and we have become reliable partners in plastic manufacturing: our sub-brand A-FORM has been created. CNC-milling machines, laser cutters, hot & cold bending tools, vacuum forming machines and a 3D co-ordinate measuring machine all serve to fulfill unique ideas from the very first design till the end product be it a singe prototype or a ten-thousand piece project. Make your choice, become our partner!

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

We are a well-known corporation here in Egypt started from 2015 in the industrial field with many oil&gas companies here in Egypt and in MENA region also. Mainly, we could fabricate many parts used in piping and pipelines departments like flanges, Mechanical sealing clamps and other piping components. Although the pandemic happens at the end of 2019 we have interrupted in our market so we are pushed to turn our market into a visual market starting there with companies in the USA like FICTIV as a manufacturer on demand then we changed our compass to Europe specifically in German with XOMETRY Europe. all of our work start from manufacturing and end with shipping the order to the customer under the DAP protocol. We aim to widen our market area in many regions and many fields with high quality and competitive prices.

In addition to fasteners such as screws, nuts and washers, our portfolio also includes CNC turned and laser parts. The dimensional range is between Ø 1-5 mm in all common (special) alloys from the areas of steel, brass, aluminum and stainless steel. We are also happy to supply you with ready-made goods, e.g. goods packed in sets consisting of several components or already assembled assemblies. See for yourself and contact us!

In our main company headquarters in Germany (Viersen) is our administration, sales, development, production and assembly. In addition, we have a production site in China (Ningbo / south of Shanghai). In recent years, Groschopp has progressed from a manufacturer and supplier of motors and drive components to a provider of drive solutions. As Tier-One supplier for large OEMs in mechanical and plant engineering, Groschopp also designs, produces and implements complete plug-and-play solutions. No matter whether you require standardized or completely customized solutions - we accompany you from development and design via prototype construction and subsequent testing, up to assembly and series production.

Established in 1992, our company has extensive experience in metalworking. We currently employ 50 workers. Our production include: CNC MILLING: We can vertically process dimensions 3000 × 1500, horizontally dimensions 2500 × 1500. CNC TURNING: Fi 1000 × 1500 turning capability. GRINDING: Flat - max. dimensions 3000 × 1500 in                      Round outer + inner Fi 450 × 2500. TOOLS: We produce all kinds of tools for stamping, forging, normals, plastics and various preparations. CLASSICAL MILLING AND CUTTING: We offer milling services up to 1600 × 800 and turning to Fi 1500 × 500, Fi 400 × 4000 and Fi 600 × 1500. WELDING OF STRUCTURES: Structures can be welded up to 3000 × 1500 and up to Fi 1200 on a circular welding table. MATERIAL CUTTING: Cutting is possible on band saws up to 800 × 800 and flame CNC cutting up to 4000 × 2000. We also have our own material warehouse.

Our company deals with metal cutting, component production, and surface treatment.

SC NAPOTOOLS SRL is a company that sells and produces tools, stamps, matrices and SDVs, based on the future, with national activity, based in Cluj County Romania. We develop and manufacture products for almost all industrial fields, according to the highest quality and technical standards. Our product portfolio includes the entire assortment of molds, tools, punches and SDVs: 1. Products made by powder metallurgy, whose geometric configuration is extremely complicated, varied and with very large tolerances; 2. Molds of elastic deformation; 3. Stamps used in the paper industry and printers (labels); 4. Cold and hot deformation and embossing dies, 5. Molds for injecting plastics