MESIT foundry, a.s., is a dynamically developing company with more than 60 years old tradition in aluminium alloys investment casting. We can offer in the house performed testing of mechanical properties, penetrant testing, radiscopy and radiography and 3D measuring. According to customer wish, casting could be machined in our machine shop.

lost wax precision foundry specialised in technical parts for demanding industries. Small to large batches. 30 grammes to 30 kilo. Parts in any kind of steel, from carbone steel to stainless steel and super alloys. Full service including heat and surface treatment and machining. All kind of inspection upon request: dimension, metallurgical, X ray, ... Strongly involved in medical prosthesis, including grinding and polishing.

Eurocast is specialised in producing precision investment castings, in both aluminium and several steel alloys. Our technology enables us to produce very complex three dimensional products in almost every alloy. Since Eurocast is part of the Aalberts Industries group we are able to combine technologies of sister companies with our castings. The results are castings completed with surface treatment, machining, painting and assembly.

Founded in 1992, Epsilon has been serving to industry and has become the premium manufacturer for investment castings in Turkey. Epsilon is the certified supplier of most of the major aerospace, aircraft and commercial industries in Turkey. Using the most modern machinery, equipment and highly skilled personnel and the capability to produce from 1 gr to over 30 kg investment casting parts, Epsilon is pioneered investment casting foundation in Turkey. In-house machining capabilities, testing laboratory ,world class engineering services are allow as to provide our customers one stop shopping. Satisfied customers are the foundation on which we have built our company and our ambition is to exceed our customers' quality, delivery and service expectations. Don’t wait and contact with one of our representatives for consultation of your investment castings needs and give us the opportunity to serve you and be one of our satisfied customer.

Pressure casting of non-ferrous metals, alloys Zinc (Zamak) and lead Main sectors: building 70% cosmetics, nuclear Integrated machining work Lead Specialist in Zamak and pressure die casting products from 0.1g up to 1Your Main sectors: housing at 70% and nuclear industries Cosmetics products Integrated machining

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

As a powerful manufacturer of steel precision casting according to the lost wax we are successful on the market for over 50 years. With our motivated team, we have expertise and technical know-how. Our company's success is based on close cooperation and partnership with our customers and suppliers. With our 75 employees, quality, flexibility and punctuality can well agree. We manufacture unit weights of about 10 g to 70 kg. In addition to the customary use, remuneration and tool steels our strength is the shedding of rust-resistant qualities. We manufacture from prototypes to series part of all batches. Our customers include well-known companies at home and abroad, the highest standards of quality and delivery times set.

precision casting using the lost wax. Company founded in 1984 current 130 People .Effectif.

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

GÜRGENLİ Mühendislik Ltd started its activities in Bursa in 2000 in order to serve in the heavy industry sector. It aims to produce quality with the knowledge of the trained personnel with many years of experience in the sector. We are a company that has adopted the principle of working without compromising customer-oriented social responsibility and ethical values within the sectors we operate. GÜRGENLİ Engineering Ltd carries out design, manufacturing and assembly projects with its skilled engineer staff in the heavy industry sector.

With Connfix GmbH as a system supplier, your processes are optimized and cost savings achieved. Together with our network partners, we produce customer-specific drawing and special parts in the field of turning technology, casting technology, stamping and bending technology as well as assembled rubber and corrugated metal hoses, which are produced in our factory. We accept the most varied of requirements and support you from the development of the prototype to series production. Our customers already include well-known OEM manufacturers (automotive, plant, machine and shipbuilding) References can be sent on request.

The Italian COMPANY Musto et Bureau Srl is known worldwide as one of the main suppliers of mechanically welded steel crucibles for casting magnesium, zinc and non-ferrous alloys. Its customized products are known throughout the world with the brand name DITTA MUSTO. As a leader in the magnesium and zinc fields, our production enjoys an excellent reputation for its high specialization and competitive costs. Over the last 10 years, Musto et Bureau Srl has developed a continuous improvement in production processes in order to raise the level of quality and durability over time. Musto et Bureau Srl tries to apply all new technologies in production and inform customers on new materials. Musto et Bureau Srl works to support customers in all their needs and collaborates with them to achieve a position of world leadership.

We are a family owned light alloy diecasting foundry founded in 1974, which works in the ISO 9001: 2015 and IATF 16949: 2016 certified quality management system. The company has 2 melting furnaces and 11 die casting machine, from 400 to 1100 tons, all fully automated, and is able to do all the necessary processes to provide the customer with finished parts ready to be used in production adding all kind of machining, leakage controls, 3D tomography, painting, and many others. We have a long experience in the die casting of for chairs, and we collaborate with the major Italian manufacturers. In addition, recently, to ensure a complete service to the customer, it acquired the company Svea Stampi, which specializes in the construction of highly complex molds for plastics and aluminum die casting with an ISO 9001: 2015 certified quality management system. With its experience of over 35 years, Svea Stampi can offer you multiple services, including the choice of the most suitable materials for the specific product, choice and study of the type of feeding through the simulation of filling, solutions for the simplification of the mold, molds for prototypes, dimensional surveys, as well as after-sales assistance and modification interventions. We design molds with dimensions up to 1450 x 1200 mm for presses with clamping forces up to 1500 tons.

“Dniprovsky special tools plant” LLC the largest company in the CIS specializing in the production of metal cutting tools (tool holders for turning and grooving, tool blocks, blades, mill bodies, drill bodies and atc) and accessories for enterprises in the metallurgical and pipe industries. For many years, our factory has provided factories in Ukraine, Russia, Belarus, Poland and Germany with standard and special metal cutting tools of European quality. The average staff count of the company is 150 people.