We are a medium company from the model, mold and tool making. We have 8 CNC - milling machines run in two-shift operation. There are a wide variety of materials, processes both via CAD / CNC and conventional. We design in Catia V5 and Tebis and manufacture both pre-production and series tools. Our tools are among others also performed with pneumatic, electric and hydraulic. In addition, work is also very strong in development and prototype construction. Among our range of services: Foaming of soft foam, PU, GMPU, electrical systems, photovoltaics, etc., foundry model, body model and fixtures, fixture, machinery, extrusion tools, sheet metal stamping dies, stamping dies, injection molds, Cubingteile of aluminum and plastic, laminate molding, etc.

In Reggio Emilia in 1935 founded in the form of a hand advertising drive. The company G. Guerra Group spa has gained considerable importance, and not only on the national territory. She is a Synoym of expertise, service and quality. It consists of 4 different autonomous separate Podukteinheiten: Press Production, production of sleeves, profiles and hoses; preparation of mixtures and production machining. The company has about 80 employees and this at a total area of approximately7,000 m2. The technical industrial progress is nowadays a considerable amount of raw materials available, ie natural rubber, synthetic rubbers and other specific additives by the company G. Guerra Group spa are selected between the manufacturers and distributors with an international reputation. For these commodities, G. produces Guerra Group spa with its own formula over 400 mixtures of a variety of types to meet the needs of customers in terms of the mechanical properties of tensile strength, tear resistance, friction resistance, compressive strength, elasticity, bending stiffness, aging resistance, liquid, heat, fire and satisfy cold resistance, as well as the conditions of the electrical insulation to kšnnen. The competence of the company G. Guerra Group spa begins with † HECK of the project of the sought-after part to realization with the Affordable equipment. It makes use of various manufacturing processes

Our registered office is located in Schönheide, a nice industrial and business place in western Erzgebirge (Ore Mountains) (New Federal States). My company is located since the beginning of 1992 in a newly constructed factory building and is equipped with modern technology. By the use of two CNC- tool milling machines (maximum travel 1.50 x 1.00 x 1.00 m), two HSC machining centres and a 5 – axle – CNC – milling machine we are able to work effectively. The operations are prepared by modern CAD / CAM workstations like: Pro Engineer, Gib-Cam, Depo-Cam and Auto-CAD-Mechanical Desktop. By means of these systems we are able to accept and process data of our customers in all common formats in order to carry out thus every machining task with the most effective milling strategy. We are 17 employees and produce synthetic and metal patterns, permanent moulds, tools and jigs as well as complete pattern devices and match plates. Should you be interested in a cooperation, we would be very grateful if you include us in your circle of tenderer.

Unsere Stärken liegen in der Entwicklung und der Fertigung von Schäumwerkzeugen und kompletten Fertigungssystemen für die kunststoffverarbeitende Industrie, insbesondere zum Schäumen mit Polyurethan. Unser Produktportfolio von A bis Z Absaugkabinen, Entgrattische, Fasstaumelstation, Folien-Tiefziehwerkzeuge, Formenträgersysteme, Glaszuführsysteme, Hordenwagen, LFI-Werkzeuge für Prototypen- und Serienfertigung, Mess- und Prüflehren, Primertische, RTM-, GMT- und SMC-Werkzeuge, Schäumformen, Schäumwerkzeuge (Glas/PUR) für Prototypen- und Serienfertigung, Spritzgießwerkzeuge für Silikon, Spritzgießwerkzeuge zum Glasumspritzen (PVC, PTE), Trennmittelstation, Werkzeugwechselsysteme Gewinnen Sie auf den folgenden Seiten einen ersten Eindruck der umfangreichen Produktpalette, mit der wir unsere Kunden bei der Produktion hochwertiger Bauteile unterstützen.

Aluminum castings, molds and Werkzuegbau, mechanical processing and heat treatment.

The Schröter model mold GmbH was founded in Munich in 1963. Continuous development and innovation have made us a competent partner for the development departments of our customers. Each of the 33 members of our highly qualified team committed to quality and customer satisfaction is committed. This commitment, modern technical equipment, the experience gained from over 25,000 custom built models and molds, as well as enormous flexibility are a guarantee for highest quality and shortest delivery times. The construction of our new development and prototyping center in Oberframmern near Munich completes our high-tech offering. Here you have since November 2005 to 2000 m2 latest milling and measurement technologies.

Flexible manufacturer of iron castings Cast iron: EN-GJL 150 EN-GJL 300 Ductile Iron: EN-GJS 400-15 to EN-GJS 700-3 Impact strength -40 ° C, -20 ° C and room temperature eg EN-GJS-400-18-U-RT low and high alloyed as Ni-Resist D2 Special materials: outside the norm in joint development with the customer. Casting weights: Production of castings with weights from 1 kg to 4000 kg No. of items: Production of single parts, small and medium series Molding process: HWS 1100 x 900 x 300/350, DISA 2013 MK3, Furanformerei Location: Lower Austria near the industrial center Voesendorf, good transport links, 25 minutes to the airport Vienna Schwechat A-2513 Möllersdorf Gußwerkstraße 7

Special mold bases for plastic injection, die-casting and punchingWe carry holders for shearing sheet metal die castings.We perform hot chamber spacers and locations for Hot Halves work various types of steels C45, 2311 and special steels such Ramax2 (Inox) in particular used for molds dedicated to the production of articles for the food industry.We provide mold bases ready for assembly, finished in every detail. From 2005 to 2009 we were associated with UCISAP, Association Italian mold makers and precision equipment. Upon request we issue the certificate of inspection measuring parts with 3D system for quality documentation.Vi.Meccanica snc manufactures special mold holder with materials and designs provided by the customer. Our technical program office machining cycles using 3D modelers (ProEngineer- WildFire) and cam (WorkNc- Cut).The finish of the mold holder is made on machining centers, equipped with thermal probes and laser tool setting for tools, so as to ensure accuracy and compliance with the tolerances imposed by the project.We realize mold holders for the containers of the sector (food and non) packaging, where the thickness of the molded parts is of a few tenths.We also do mold bases for engineering goods, automotive industry (glazing) with numerous inclined trolleys, multicavity and sandwich boxes and various types of containers

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

Plastic Injection Moulds Manufacturing

Sedlom specializes in the design and manufacture of precision technical molds for the plastics industry, located in Marinha Grande, Portugal The molds produced are mainly intended for the automotive industry, home appliances and electronics. 90% of them are for export. We obtained the Status PME Lider in 2014, 2015 and 2016 in recognition of its excellent performance.

ABOUT THE COMPANY The company MV METAL PROFI is a reliable and professional partner for the production of tools and components for the automotive industry. The company is distinguished by the high standard of quality of products and services and for many years the company has been focusing on the German automotive industry. The strategy of the company is based on close cooperation with business partners to develop their products. We develop cutting-edge projects and offer integrated professional support in finding new technical solutions, from the idea to development and final solution. All in one place. Why Choose Us? Because we are a family-owned company that is aware of the importance of the highly qualified employees who represent the foundations of the company and who we constantly invest in. We strive for progress and modernization of hardware and software. With a stable technological development we are able to produce products of the highest standard and provide high quality services. Focusing on the individual needs and wishes of our business partners and building tight long-term relations is an important building block of the company. Due to our excellent knowledge of foreign languages we are able to communicate smoothly with our partners.

"If you stop wanting to get better, stop being good. " Marie von Ebner-Eschenbach True to this motto, SMK Schweitzer has been a successful service company in the field of model and prototype construction as well as plastics technology for decades. We have specialized in the production of development and pre-series parts, among other things, have modernized our machinery over the years and have continuously expanded our range of services for our customers. We can now count international companies such as automobile manufacturers or large corporations among our satisfied customers, and we would be happy to add you to this list soon. We invite you to get an overview of our wide range of products and our machinery on these pages and we look forward to hearing from you soon.

Our core business is design and manufacturing of injection moulds for pallets, bulk bins, waste containers, crates and medium-to-large parts for other applications. Here you can watch our company video: https://youtu.be/MVRRBtNxbj8 Highlights of our company: -since 1982, more than 2000 moulds built for products weighing from 500 grs up to 40 kgs -100% production in our two plants in Jesi -Customers from 35 countries all over the world -High flexibility and easy communication thanks to a lean structure -Product design, injection moulding analyses, reverse engineering, prototype moulds ecc. -Trials in our factory on machines from 750 T to 4800 T -Assistance during start-up at your site -Service and repair, also at your site, also on moulds built by other moldmakers

Made-to-measure plastic containers

We combine 70 years of plastics processing in Scheibenberg with the possibilities of modern technologies to create innovative products. Highest quality, reliability and unconventional solutions at acceptable prices are our claim and motivation. We regard satisfied customers through service and support as a matter of course. Our highly motivated employees are constantly dealing with the requirements of the industry. They are well-equipped for this thanks to well-founded qualifications (DIN ISO EN 9001), many years of professional experience and an open mind for the imminent technological upheavals of the future.

tmp-machining is a young, flexible and very committed company with the aim of meeting or even exceeding your customer requirements. The focus here is on the quality and timely processing of your orders. The short communication channels and the associated fast response times are among our core competencies.