BRC Test & Automation is an engineering company specialized in the design and manufacturing of customizable automation and test system solutions. With the systems that we design, we are trying to materialize the solutions that our customers broadly envisaged in order to reach their goals. If you want to facilitate your assembly and test processes and to increase effectiveness, you are at the best address where your desires and expectations are carefully followed and these expectations are designed and materialized in the best way possible. Our experienced staff not only respond quickly and effectively at the design and commissioning stage but also to the possible needs that may emerge after purchasing.

JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures. OUR DEPARTMENT: 1 engineering office + 1 machining company A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL. For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts. Our team: 6 engineers and 5 technicians are at your disposal to answer your problems. Our strengths : - Development of specific solutions - Prototyping - Machining - Cutting - Manufacturing Our philosophy: Provide French quality products at the best prices!

3d designing, automotation systems, robotics, prototyping, 3D print

Development Innovation Center, an institution for the promotion of entrepreneurship, research and development is established by the Sibenik-Knin County. The Central Finance and Contracting Agency has approved within IPA program funds for its arrangement and equipment. Apart from the EU funds, the project is co-financed by the Šibenik-Knin County. Facilities intended for activities connected to regional development and encouragement of entrepreneurship in development of new technologies and final products are being equipped in an ex-military complex that was given to the city of Šibenik by the state. Maritime Innovation Center iNAVIS is also located in the same facilities. The facilities consist of a laboratory for testing the quality of aluminium products and other metal products, construction bureau and workshop for construction of models of final products, exhibition area for innovators, conference hall intended for education of entrepreneurs, primarily in new technologies - 3D product design and preparation for CNC production, holding meetings, presentations, center for renewable energy sources, center for clusters and office for EU projects. The size of the center is approximately 800 m2. Apart from arrangement and equipment of the facilities, activities connected to education of regional and local government employees as well as entrepreneurs in usage of new technologies in production (of mostly aluminium products) also take place in the facilities. The project lasts until December 2015. Through Techpilot, we provide services for 3D printing of plastic products. https://www.techpilot.net/servlets/AuctionConnector?template=asyncListLoaderPrivate&list=content_company_profile&lngCode=en&standAlone=true#

German and English

Preciflex service engineering is more than 25 years of expertise in CNC machining, pre-finished machine parts and function-ready modules. As a privately owned, medium-sized company, we produce approximately 25 employees on highly automated manufacturing systems. Our core competencies CNC milling and CNC turning, we are constantly developing. Activities, we are in the areas of drive technology, medical technology, aerospace, fluid power and general engineering. We produce according to your specifications and deadlines, with maximum quality and precision. Through our network of qualified partners we can offer all galvanic and paint and powder coated surfaces.

We are a young and ambitious company that is steadily since 1999 growth. In our new workshops tailored systems that exactly match the individual requirements of our customers arise. On most modern CAD workstations and CNC machines we put your wishes fachgrecht. Our Strengths - Your Benefits Everything from one source Our strengths - Development, design and manufacture of special machines, production parts and prototypes - Own production of necessary resources, such as clamping and mounting devices - Edit the components on CNC machines - Procurement of purchased parts - Complete assembly of components / assemblies - Delivery Your advantage - Complete systems from a single source - Professional solution to your problem - Wirtschafltiche prices - Fast turnaround time - Very high flexibility - Druchgängiges quality concept

Whether it is special machine construction or industrial plant, Item or series, we work according to the motto "Everything from one source". The customer does not need to worry about where he gets what, with us leaves the order as desired lacquered and ready assembled the house. This saves money, time and ultimately the customer money. Should it happen that we are unable to produce something in the company or a work step is unprofitable, we are happy to organize a third-party production. Our goals: Best quality, low cost, satisfied customer!

Kuddatek Maschining SRL is a new, dynamic and customer oriented company founded in 2017 in Arad, Romania. From a simple design to the final product, the complete solution is at your disposal. Kuddatek Machining is at your disposal with the following current capacities: - design and technology, - Production of turned parts on two machines Hyundai WiaL160LMA and Hyundai Wia L230LMA - Production of milled parts by reliable third party suppliers - Surface treatment by reliable third party suppliers - Measuring equipment - PJ-A3000 profile projector Mitutoyo - Altimeter LH-600E / EG - technical support The main investments for 2018 are a surface tester Mahr PS10 and certification ISO 9001: 2015 by TÜV SÜD

To improve indoor air quality, we offer high-quality, high-quality air purifiers that remove a large number of pollutants in the indoor air. Over 40 years of experience, competence and service orientation enable us to offer effective air cleaning solutions - with industrial air cleaners that remove the smallest fine dust particles down to 0.01 micrometers as well as coarse particles and bad odors, with the world first Dust Free Industrial 8500 in a compact, lightweight design, with air cleaners for open-plan offices , Laboratories, restaurants or schools, dental surgeries, restaurants, with smoking cabins and much more. EUROMATE PRODUCES CLEAN AIR CLEAN AIR ... in production, logistics, processing, workshop With a Euromate extraction system, you can prevent employee health problems, corrosion and product contamination, and machine malfunctions. Our dust filter systems, specially designed for industry, effectively clean the air of dust, smoke, oil mist, welding smoke and other harmful air particles.The industrial air cleaners from Euromate are attached to the ceiling or wall to save space and circulate the air in the hall from there, with the filters sucking the pollutants out of the air. Our hall air cleaners work in recirculation mode, which is why complex conversions or pipe connections and associated costs are not necessary with our system. Sink with a dust extraction for industry. Your cleaning costs and the health risks for your employees - and productivity increases. , CLEAN AIR indoors In addition to dust, soot and fat, pollen, viruses, microbes and aerosols contribute to poor indoor air quality. Even furniture and other furnishings continuously release chemical substances, according to the Federal Environment Agency. By opening the window, further pollutants get into the room air. Missing or insufficient circulation favors the negative effects. The new VisionAir Blue Line from Euromate helps you to minimize these risks. This air purification system ensures circulation and effective purification of the indoor air indoors. There are different types of filters that tackle individual problems, such as Dust and fine dust, Mold and spores, Viruses and bacteria, unpleasant smells and Tobacco smoke. The suction systems pick up the smallest particles and let the cleaned indoor air flow back. After installation, the VisionAir Blue Line from Euromate is plug-and-play (just plug in) and can be used in a variety of ways. CLEAN AIR in restaurants and professional kitchens Euromate has developed an innovative filter system especially for the catering exhaust. The kitchen exhaust system removes more than 90% of the fat and smoke particles from the room air, which is also economically profitable: by cleaning the exhaust air you save up to 50% of the normal costs for cleaning exhaust air systems. Professional filter systems especially for professional kitchens remove odors, greases and vapors and leave clean room air.You also minimize the risk of fire by using a suitable kitchen exhaust air cleaning system, since fat particles do not get stuck in the conventional extractor hood. CLEAN AIR through smoking cabins Provide fresh, smoke-free air and more productivity in your company. Find out more about the practical smoking cabins for indoor use and comply with the no-smoking protection laws (NRauchSchG) without disadvantages. Euromate also offers various financing options such as rent, purchase or hire purcha...

Dniprolymermash PJSC – is a ISO-certified ( 9001:2015) heavy engineering plant active in the fields of manufacturing and machining of -optional equipment (spares, assemblies and units for oil-and-gas industry, mining, metallurgy and others) -heavy steel structures (for metallurgy, bridge structures, motor/railway/bridge crossings, frameworks of buildings) - press molds for pneumatic and solid tire vulcanization (up to DN5000 mm) , tubes, rim bands and diaphragms.

Production of hydraulic components from the areas of clamping technology, media routing, valve technology and others. The following clamping elements are offered: lever clamps, swing clamps, centering clamps, support elements, screw-in cylinders, block cylinders and pneumatic clamping elements. The following valves are available: time switches, sequence valves, throttle valves, pilot check valves, pressure reducing valves and various check valves. The following media couplings are also offered: coupling elements, multiple couplings and coupling units. We also offer pressure intensifiers, filters, hydraulic accumulators and various other hydraulic and pneumatic items. Furthermore we offer complete hydraulic control units and devices and fixtures.

INM Creator is specialized in 3D Printing FDM, SLA, SLS, SLM and laser cutting and marking. With large experience of more than 20 years in enginnering, developing and manufacturing components for automotive industry mainly.

Airwork, pneumatic cylinders, valves and air treatment Welcome to Airwork, an Italian manufacturing company specialized in the designing, manufacturing and selling of standard and customized solutions in the pneumatic automation industrial field. A strong passion for products, push our Company towards a continue development and innovation process in a field which is continuously changing. In our catalogue you can find pneumatic cylinders and actuators, valves and electrovalves, air treatment units and fittings; these are the four product families that lots of new customers are choosing and are appreciating. AirWork is part of a big and consolidated Group, with UNI EN ISO 9001 and 14001 certifications, who is operating from 25 years in many industrial fields and boasts a modern and proven designing system, an always up-to-date and powerful machinery, dedicated lines for products assembling and testing thanks to the highest standard of detection and quality control. The experience and skills of AirWork staff is the added value to the efficient organization and high standards of quality. All these elements make AirWork ambitious to reach new and bigger goals through a continuous innovation of our products, with the aim to satisfy all our customers requests.

Maschinenbau Weidemann GmbH is a modern company for special machine construction, 3D milling technology, conveyor technology, press technology, welded constructions, switch cabinet construction and much more. Our machines are state-of-the-art. This means that we can more than meet today's requirements from industry and trade.

Reuse of existing and proven machine tools up to complete production systems - through conversion, automation, overhaul, maintenance and relocation.

tok Our trained specialists can provide assistance in all areas of automotive testing and high-precision manufacturing: Consultation on the product to be manufactured, engineering consulting Complete computer aided design Manufacture of electronic, pneumatic, hydraulic test modules and test tables with PC control

Founded in 2019, Motmould is a professional 3d printing and moulding solution company based in Sighetu Marmatiei, Maramures, Romania. We provide an end to end process, 3D scanning, technical design, agile prototyping and manufacturing solutions with next generation technologies for a wide range of plastic product parts which are enhanced at every stage of the requested products development.

Veltech is an engineering & manufacturing company located in Turkey. With its wide variety of technologies (Machining, turning, welding, coating, sheet metal processing and Heat treatment) on its machine park, Veltech is an AS9100 certified supplier of Aerospace & Automotive companies.