We produce for the machinery, automobile and aircraft, as well as for other companies from various sectors.

The firm spot CNC technology was founded in 1960 in Neubulach-Liebelsberg. Since now more than 45 years, turned parts are made of the materials on your diverse conventional and modern CNC lathes. On request we manufacture single and serial parts in high quality and accuracy. Satisfied customers are the best proof of a successful work. Thanks to our over 45 experience, our flexibility and punctuality are loyal to us many of our customers for years. Benefit numerous, well-known companies from the automotive industry, mechanical engineering and other industry segments of our range of services. Our references confirm the quality of our work. On request we will be happy to send a list of our reference customers.

We are suppliers for industry and trade. Our manufacturing capabilities are: CNC plasma cutting, sawing, punching, drilling, tapping, turning, welding MIG MAG TIG ... Products: Weldments and Parts according to customer requirements in the areas of steel construction, mechanical engineering and special engineering such as machine frames, machine frames, steel structures, consoles, construction from waste water technology and water treatment etc. We mainly steel and stainless steel. CNC - plasma cutting: * Up to 30mm thickness * Available in steel and stainless steel * Cutting range max. 3000 x 1500 mm * Blanks (also possible cuts by argon-hydrogen) by means of technical gases for optimum cutting quality * Programming in accordance with templates and sketches * Reading drawings in DXF - format Stamping, conventional: * Steel up to 40mm diameter 20mm in thickness * Stainless steel Diameter 24mm to 15mm in thickness Drilling, tapping: * Drilling up to diam.35mm * Tapping up to M20 Turning, conventional: (Clamped inside) * Max workpiece diameter D = 600mm * Maximum workpiece diameter D = 300mm (outside cocked) Saws: * Round up to diameter 240mm * Flat to 300mm width Welding: * MIG / MAG * Component manufacture according to drawing * Maximum part weight: 500Kg

The transmission plant Pirna already exists since 1885 at Pirna and our staff have many years of experience in the machining of stainless steel, steel, gray and ductile iron. We already today deliver parts and components for manufacturers of agricultural machinery, motor manufacturers, make Subcontracting for foundries and much more. The flexible use our extensive machinery production quantities are available from individual production to small series to mass production. Our production is divided into the areas of milling and turning with the most modern machining centers. Through cooperation with companies for castings and forgings, we are able to manufacture complete assemblies from a single source. Quality control with CNC-controlled 3D measurement technique is guaranteed. The aim of the transmission plant Pirna GmbH is to supply our customers with high quality and on time.

The KAUTZ fixture GmbH develops and produces machinery, equipment, single and series parts for about 30 years. Our competitive advantage lies mainly in the wide range of products and the flexibility to implement individual customer requirements. Behind our performance power are 200 employees and an area of 8,500 square meters, on which we can edit machine parts weighing up to 80 tons in the KAUTZ Group

Deco Srl . is a leading Italian manufacturer and exporter of turned parts according to technical drawing. The range of our product line, good quality, and competitive prices have made us one of the fastest growing companies of its kind in Northen of Italy. Located in Brembilla, we produce turned parts according to technical drawing with the diameter 3-100mm up to 1500mm in length of all ferrous e non ferrous materials. We at Deco Srl will work with you to produce the types of turned parts according to your needs . We guarantee both our quality, technical support and on time delivery of shipments and our prices are very competitive. For more information please go to our web site at www.decosrl.it

LDS GmbH your partner for sheet metal and tube forming High quality standards, modern machinery and highly motivated people with a passion for their profession are the basis of success of our work. Thus, we are able to respond flexibly to the diverse requirements of our customers. Enjoyed on your own. The Hülsmann Laser GmbH is a young company, founded in 1999, arising from the Hülsmann Stainless GmbH & Co. KG.

We are a manufacturer of Präzisonsdreh- and precision milled parts and offer services in tool and mold making. Our factory is located in the Silesian Nikolai (Poland) and offers our customers excellent product quality and a very good price / performance ratio.

Service companies in the field of processing and processing of metals and plastics / Cleaning and degreasing of components and assemblies

The Spaankamer is a young and dynamic metal processing company. Our passion lies in the manufacture of smaller structures in steel, stainless steel and aluminum, as well as Conventional and CNC machining. With a team of 8 people we try to manufacture your products quickly and efficiently. We are focused on making small to medium-sized series (100 - 1000 pieces). Together with you, we can also bring your ideas to life through our 3D CAD software "Autodesk Inventor", making us a "One Stop Shop" for many products. From idea to drawing & realization.

We are a family company from a small village Prekopa in Vransko community. We have been active on the market since 1993 and we have been trying to adjust to the market and clients’ wishes since then. S&A Company was established with the purpose to produce all kinds of tools but we also offer other services such as production of all kinds of roughing jaws and mechanical parts in metal industry. We are active on the domestic and foreign market. We mainly export to Austrian market where we have been successfully doing business with bigger Austrian companies that value our quality and affordability for 15 years. Our company has been technologically modernised recently, and in this way it is also capable of producing even the most demanding projects in the field of machinery industry.

Steel is our lifeblood - that's us LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019. LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise. The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success. LSV location Landsberg am Lech headquarters At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level. LSV location Oberndorf am Lech The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year. A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain. The youngest LSV location in Meitingen Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

The company's production facility is located in Liepaja, Latvia, in an optimal location for customer service. This is evidenced by the orderly production infrastructure, excellent transport connections with European countries, the adequacy of engineering staff resources and the ability of educational institutions to train metalworking specialists. Together, these facts create special conditions for the attractiveness of our products in the eyes of the customer.

Toolmaking With more than forty years of experience, we know what is important! The best tool can only achieve the desired success if it has proven itself in practice and if important relationships from the field of manufacturing technology are taken into account during planning and construction. Process reliability, precision and service life are just a few of the essential properties that our tools meet. We offer you our competence from tool development to tool design and manufacture to maintenance and preventive maintenance. For production, we have the equipment and the network to offer you all the necessary manufacturing processes.

The Amschwand is a one man company which focuses on quality.

Individual solutions for components, mechanical assemblies and systems for mechanical and plant engineering. MSA AG is your reliable partner in mechanical and plant engineering for a wide variety of technological applications. We devote our attention to simple steel containers as well as highly complex research systems. We take on the complete range of plant construction for our customers - from conception and construction to production and after-sales service.

Ranieri is an Italian company certified ISO9001:2015, a sub supplier specialized in the production of industrial rollers: conveyor rollers, rubber rollers and cylinders. Our partners operate in different sectors such as the paper industry, earth moving machines, agriculture, wood and other industrial machines which need rollers upon technical drawing that reach diameter Ø520mm and length 3.150mm.

Metal Process 18. May is a family owned business that operates in Gornji Milanovac, Serbia and currently has CNC milling machines and CNC lathe machines. The company's target market is mostly based in Serbia, as well around Europe, such as in Germany and Austria. We plan to expand the locations of deliveries of our services to other Europian countries. Our company is committed to providing the best value for money, fast and efficient service, that brings us good reputation far above competitors. Managing Director Vladimir Obucina, together with experienced and skilled staff intends to provide customers with optimal products to meet customers goals and needs. We continuously challenge ourselves to prove good quality service to customers and exceed their expectations. Metal Process 18. May objective is to find a trustworthy partner that will help us to expand our markets and establish a win-win business relationship. Thank you for your time, and it would be a pleasure to get an opportunity to become a partner with a great company such as yours If you have inquiries please do not hesitate to contact us for any further information. All quotes and orders will be processed as efficiently as possible.