Calculation, design and sales of springs (extension springs, compression springs, torsion springs, spiral springs, wire and flat molded parts, bending parts and assemblies) of round, flat and square wire. Springs: - Wire thicknesses up to 3.3 mm (round / flat / square) Applied end turns or open - Ground end coils or unprocessed - - All winding body geometries feasible (cylindrical, barrel-shaped or waist, Beehive, Taper) Extension Springs: - Wire thicknesses up to 2.8 mm (round / flat / square) - All possible Ösenformen feasible (incl. DIN) - With adjustable internal bias voltage (eg to achieve digressive characteristics) Torsion springs: - Wire thicknesses up to 4.5 mm (round / flat / square) - All leg shapes feasible - As a simple torsion spring, double torsion spring, torsion spring quadruple Spiral springs: - Wire thicknesses up to 3.0 mm (round / flat / square) - Windungsverlauf freely adjustable - With or without molded legs - All possible Ösenformen feasible (incl.DIN) Wire and flat springs: - On winding, coiling, bending centers of brands Wafios, Itaya, Simplex Rapid or BIHLER - Wire thicknesses up to 4.5 mm (BIHLER up to 10mm) Coils: - Wire thicknesses up to 4.5 mm - From enamelled copper wires with stripped and tinned ends - RF coils of silver-plated copper or bronze wire Stampings: - Bandwidth up to 120mm, thicknesses up to 10mm - Additional Technologies welding, threading, bolting our BIHLER automata - Assembly of components including processing of supplementary parts (plastic parts / screws / wire springs, etc.) - Tubes of strip material with and without slot, tape ends clinched or shock Manufacturing technologies: - Winde-/Wickeltechnik - Stanz-/Biegetechnik - Grinding of spring ends - Shot peening - Heat treatment - Surface Technology - Setting and testing - Isolation & automatic packaging All manufacturing technologies can be linked if required! Materials: - EN 10270-1/-2/-3 / / EN 10151 / / etc. - Copper, beryllium copper, bronze, brass, copper alloys, etc. - Cr / Ni steels and duplex steels - Surface-treated and plastic-coated wires - Composite materials RIBE has its own tool and a house plant! Development & Construction: - CAD with interfaces to all major 3D CAD programs - Spring calculation software - FEM analyzes / FMD possible Certifications: - DIN ISO 9001 - ISO / TS 16949 - ISO 14001 - OHRIS Connection technology: Screws as drawing parts, Pleulschrauben, motor screws M2 - M24, cold formed parts, rivets production quantities of 50,000 pieces We look forward to meeting you!

Iron FT is an Engineering and Production company

Franz Schürholz GmbH is an owner-managed family business in the third generation. In 1946 Franz Schürholz founded the company in Menden. Initially, household goods, kitchen appliances and agricultural supplies were produced. In the following decades, the company developed into an innovative partner in the cold rolled profiles and stamping products divisions. Today, our products are as diverse as our customers. Industries from A to Z rely on the quality of Schürholz: automotive, construction industry, fitting technology, electrical and filter technology, crane construction, shopfitting, lighting industry, mechanical engineering, furniture and office furniture industry, connection technology and other future industries. Continuous growth required the continuous expansion of production areas and the relocation from Menden to Wickede - the current location of the company. Here, 30 qualified employees using high-quality materials and the use of modern machinery guarantee the recognized quality of our products.

about us We offer extensive manufacturing solutions for your tasks and requirements in the field of CNC sheet metal processing We specialize in fine and thin sheets, as well as stylus sheets. Our machines are able to manufacture sheet metal materials such as steel, stainless steel, aluminum, brass, copper and spring steel from a material thickness of 0.1 mm - 20 mm at high cutting speeds in precision to an exact size. We fulfill orders for businesses and private customers, regardless of whether large or small quantities are required. We work according to customer requirements, on time, in high quality and remain inexpensive. The delivery of products takes place in the agreed quality in the shortest possible time. We work for your catering business, produce garden decorations, create names and advertising signs as well as entire privacy fences.

Metal fabrication company based in Bucharest, Romania with 30 years of experience in this field. With Lloyd's Register quality assurance system and multiple CMM's and length machine, the main purpose of our work is client satisfaction. Try us or, if opportunity comes along, visit us! Regards

Your solution partner from sample process to mass production.

Wir arbeiten weiterhin an der Zufriedenheit unserer Kunden mit unseren hochwertigen Laserschneidmaschinen und Faserlaserbeschriftungsmaschinen, UV-Druckern (UV-Druckern), kompletten Ersatzteilen, Laserglasröhren mit 6 Monaten Garantie, Linsen, Spiegeln und technischem Kundendienst Unterstützung, wie schon seit 20 Jahren. In unseren CNC-Laserschneidmaschinen bieten wir eine maximale Schneidkapazität von 3000 x 1500 bei 4000 W, mit einer Schneidkapazität von 22 mm bei Plattenblechen, 15 mm bei Edelstahlblechen und 12 mm bei Aluminiumblechen . Vorteile des Laserschneidens; • Effizientester Materialeinsatz in der Produktion. • Schnelles Schneiden in der Produktion, niedrige Kosten. • Produktion ohne Formen in kleinen Stückzahlen. • Kostenreduzierung bei minimaler Abfallquote. • Die Herstellung aus Blechmaterialien ist wirtschaftlicher als die spanende Bearbeitung. • Hohe Präzision (0,01 mm in allen Dimensionen) durch die stabile Konstruktion der Maschine und die moderne Bedien- und Messtechnik. • Es ermöglicht komplexe Laserschnitte von einfachen und Innen-Außenkonturen sowohl auf dünnen als auch auf dicken Blechen.

Our claim: Timely implementation of your products ordered from us high-quality production of individual parts, small and large series, as well as assemblies satisfied clients and a sustainable customer relationship We are happy to advise you on the implementation of your projects Everything from a single source: Lasern edges welding Sanding and rounding of metal sheets small turned parts Milling up to 1600mm in length Painting in your own paint booth W/D/H 7 x 5 x 4 meters

As a family business, Metalldesign Schmitt deals in the broadest sense with the treatment and processing of metals of all kinds. The focus of our work is the construction and assembly of stair and balcony railings through to larger steel structures for industrial applications. We are suppliers to both industrial and private clients, but thanks to our modern machinery we can also provide various contract work services for other metalworking companies. In addition, we are also specialists in the construction of clean rooms or special custom-made products according to customer specifications. Our company Metalldesign Schmitt was founded in 2010 and is based in the restored ensemble of the former Saarbrücken-Burbach railway repair shop, which has been prepared for all kinds of businesses. With few exceptions, the well-preserved buildings date from the time when the factory was founded (1857) and thus contribute to the unmistakable character of the location. Metalldesign Schmitt has found optimal possibilities here for its production and working conditions. We deal with all types of metal processing. We have modern machines and well-trained specialist staff at our disposal for this purpose. We are a registered welding company and fundamentally certified according to DIN EN ISO 9001:2008. Especially for the complex requirements in the field of welding technology, we are certified as a specialist welding company according to DIN EN ISO 3834-3. We also have certificates from various regulated areas.

Polish subcontractor in fields as: CNC punching and stamping, CNC sheet metal bending, conventional stamping, welding: MIG/MAG, LBW Laser Beam welding, laser cutting. If you look for a stable partner for your parts or ready products - call us.

The study and implementation of press tools for cutting and stamping. • The mass production of cut and stamped parts. This is a team of 48 people, dynamic and effective methods, validated by a panel of more diversified customers: automotive, hardware, tools, construction, electricity, electronics ... ROUGETTE TECHNOLOGIES provides: • A consulting firm performing the design, development and improvement of tools for cutting and stamping. • A mechanical workshop producing tools, adaptation and implementation tools at points of cuts and drawing and spare parts. • A workshop presses from 50 to 500 tonnes for the manufacture of spare sets of cuts and stamping. • The management of other services such as surface treatment of parts to deliver a finished product.

Dear Ladies and Gentlemen, since we run a business for 32 years, we would like to offer you our range of products and our services. Our company has been in the production of print, train, torsion, Doppeltorsions (double leg), Springs for hinges, special springs (Power Springs) for vacuum cleaner - springs for winding the cable, magazine springs and special springs from wire and band produced on "bendability machines". Experience, we have also in the manufacture of springs for safety belts in automobiles. We use Durchmässer wires from 0.1 mm to 4.0 mm and strip thickness to 2 mm. Doppeltorsionsfedern we produce for 15 years. Every year is produced in our more than 120 million of these springs. After our production program and the size we are the main manufacturer of springs in Croatia. If you want to choose us as a long-contemporaneous partner, you can enjoy our benefits: - The most modern lines with a very high level of automation and thermal processing - Own design, tool room and own patented inventions - An automatic control device - A stable supply of export materials from all dimensions - Very quality products for the best prices and short delivery times - Development of new products in collaboration with our customers, where our team with great experience to Verfühgung. To ensure the quality, we use the standard ISO 9001.

BAUMANN GmbH Germany was founded in 1964 in Lichtenstein. The company operates at global level in the field of development, production and sales of springs, pressings and special products. Extensive automation of the production processes guarantees an optimum price-performance ratio. Our customer segments range from the automotive industry through electrical and medical technology, mechanical engineering and engine building to manufacturers of household appliances. In our Lichtenstein works, we currently employ over 200 qualified personnel in development, production and sales. Motivated and systematically trained, our employees have state-of-the-art technologies and processes at their disposal.

We are all about punching and bending parts professionals! Production and consulting by R.Schulze GmbH. With many years of experience, we produce punched and bent parts in all series sizes. Our workshop is also specialized in the design and construction of prototypes. For toolmaking we design and create complete punching tools For customers who want to take the finished product, we deliver stamped and bent parts in all desired quantities. By a far-reaching automation of production, large series can be produced quickly and precisely. The core competences of our certified company are: Punching technology: Production of stamped parts and bent parts in large series Toolmaking: Design and creation of high performance punching tools Feeding technology: Feeding of stamped parts and bent parts by means of special feeding technology

INDUSTRIAS ALZUARAN, founded in 1959, is a spanish ISOTS16949 certified company dedicated to the manufacture of stamping parts with heat treatment, such as retaining rings DIN-471,472, 6799 spring washers DIN-2093, safety washers DIN-7967, wave washers, clips,.. etc…and special parts according to drawing or sample up to 6 mm in thickness. Our main customers are related to automotive industry, locks, home appliances, windmills, electric market, machinery and hardware distributors. Our export percentage is around 35% to many different countries such as Germany, Austria, Belgium, Brazil, Colombia, South Korea, Czech republic, Denmark, Dubai, France, Holland, India, United Kingdom, Israel, Italy, Japan, Morocco, Mexico, Norway, China, Poland, Romania, Singapour, Slovakia, South Africa, Sweden, Turkey, USA, Venezuela ..etc… You can find further information, visiting our web page www.alzuaran.com If you are interested in our products, or want technical advice, you can submit your enquiries to j.a.barrenetxea@alzuaran.com, and we will kindly answer you.

MÜLLER metal processing + Locksmith We are a young, dynamic company with qualified personnel. Our range of services extends from mechanical processing on weldments to general locksmith and metal construction. MÜLLER metal processing + Locksmith was established in 2005 as a classic one-man locksmith under the name "metal builder Sven Müller". By konsequnte implementation of our corporate philosophy, the power spectrum has been constantly expanding. Here, we developed a service provider in the metal processing. Philosophy: If you only ever do what you can already You'll also only remain what you are already.

Your partner for sheet metal processing - competent, innovative and flexible! As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard. Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance. Quality assurance goes without saying. The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production. Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products. We are looking for personal contact with our customers, scrutinize all wishes and concerns. Expert contacts and friendliness in all areas are part of our corporate philosophy.

Weinmann GmbH stands for decades of experience in the fields of metalworking, stamping and forming technology. For us, not only the processing of stainless steel and aluminum with the most modern machines belongs to our daily business, we are also the specialist for the forming and processing of nitrile "NBR" coated materials with our tools. We are proud to say that our employees are highly qualified professionals with a passion for their tasks. Thanks to our flexible, committed and highly motivated team, we can react quickly to short-term concerns of our customers. Regular internal and external training courses for our employees guarantee an output