About us C - Computer N - Numeric F - Production The CNF fine technik GmbH has a simple principle: Nothing but the best! We supply high quality with consistent precision to meet your high demands. We have our fully air-conditioned with a modern production machinery available. This allows high flexibility in order processing and punctual delivery. We process all machinable materials in medium and large series. Modern management, eg through networking of our machines on the intranet and years of experience ensure a perfect value for money. Our enhanced customer service qualified advice counts in your manufacturing problems. These strengths you can rely on. Take us at our word!

Since 15 years we are and stand for quality and precision in the manufacture of mechanical precision parts in single and serial production at: Turning parts, Milled parts and Assemblies to customer specifications, for the following industries: Toys, Electronics, Seating, Stationery, Musical instruments, Molding Shops and Metal goods trading.

20,000 good reasons Customer interest in the first place Quality and service from Febi Bilstein primarily serve the interests of our customers. In order to always meet even the highest standards of the market, we continuously develop our products. This high requirement applies to all of the more than 20,000 different deliverable items. Our customers can rely on short delivery times and deadlines. In addition, we offer additional services and excellent value for money. Home on the world market In the free market of vehicle spare parts Febi Bilstein is one of the international market leaders. We are represented on all continents, in 69 countries, in order to always be close to the market and our customers. Trust the brand "Febi" if you want the highest quality and excellent service worldwide. Sales at home and abroad Febi Bilstein supplies its products to over 130 countries around the globe mainly to trading partners. The export share of the company is around 70 percent. In addition to the German headquarters in Ennepetal there are more branches and offices in Germany, Great Britain, Italy, France, Benelux, Poland, Serbia, Spain, China, Singapore and the USA / Canada.

The company Pöselt was founded in 1957. Today, we are specialist in the production of turned parts and produce with approximately 20 employees precision turned parts to more than 40 lathes. Our clients include companies from the automotive, mechanical engineering, plastic, electrical, and medical industries. The family-run company combines the advantages in terms of flexibility, information flow and price level. Our years of experience and reliability are the foundation for the satisfaction of our customers. Looking for a supplier with expertise and flexibility, you will find we are the right partner. We look forward to your inquiries.

Ball precision machining parts ... ... is more than just a company name - it is a quality predicate which has grown steadily in terms of precision and just-in-time production to the needs of our customers since 1962. As a global company, we supply many companies in the automotive, electrical, telecommunications, aerospace and micro-mechanics industry - business segments in which no inferior products might exist. To ensure this standard, we perform early 2003, the certification of the environmental management system according to DIN EN ISO 14001 ff a. Our modern machinery and the experience of our employees are the key to our success, a success that we are happy with you - would share - to our customers.

Company: We are a company for CNC - Precision turned parts with seat Spaichingen. We are demanding Klein - specialized and large-scale parts. Even simple turned parts are welcome. CNC turning of long-or short-rotation parts of the rod span decreasing machining heat and cold formed parts are part of our Area of responsibility. We use the latest CNC lathes with handling robots and magazines. These enable us to: * High cutting * Highest accuracy * Economic Processing Services: Completion of hot-and cold-formed blanks on our CNC controlled machine with handling systems. On CNC lathes Diameter of 3 mm to 32 mm Cross-processing, such as: drilling, milling, molding, ... Range of rotation: # 3 mm - 32 mm from rod # 10mm - (60mm) 250 mm chuck parts Materials: * Brass * Cutting steels * Stainless steels * Aluminum * Etc.

The company Teknomar Makina was founded in 2000 in Istanbul by Saim Erkeskin & Sebahattin Altıntaş. In the area of 650m2 is our company's CNC lathe CNC lathe, Einspindeldrehautomat, automatic lathe, six-spindle automatic lathes, drilling machines and Fraescentrum operation. Our delivery program contains parts from Ø 8 to Ø44 mm from bar stock Ø 20 to Ø 350 mm Abgeschnittenäsmaterial cutting steel, brass, aluminum or Gusteile and other material. The work for ISO 9001: 2000 is ready for us and we are from 04.02.2008 Certified. Our main goal is to offer definitive solutions to meet specific requirements of our customers at home and abroad with advanced technology, best products and our service. Our company produce bulk of siblings parts for ships under this web address they can also visit the company www.tekno-margemicilik.com

We are an international service company with its own production in Serbia, which has specialized in the manufacture, supply and delivery of steel and metal products (Parts) and the module assembly for the metal industry, but also for general manufacturing companies. Due to the continuous reduction of development and production times the smooth cooperation between customer and supplier is becoming increasingly important. The Way: The extended workbench through outsourcing. Trust the WeKro outsourcing GmbH. With our qualified staff, we manufacture high-quality assemblies of various kinds - mechanical, hydraulic, pneumatic or combined systems, fully wired and tested at the request 100%. Here, we use either the material provided by you or we procure the required material, unless we can produce in our house it. The services offered by the WeKro outsourcing GmbH includes: Contract Manufacturing: CNC turning and CNC milling In modern CNC lathes, we manufacture all kinds of CNC turning parts and CNC milled parts such as bolts, glands or joints - according to drawing, sample or according to your special information. Assembly production with internal and external parts, including purchasing, scheduling and logistics. Average lot sizes 500-10000 piece Large series 10000-500000 piece Wage montages: Our services in the area of contract work include the following activities: Assembly Wage montages All manual assembly operations, which can be implemented externally Deburring and finishing of precision mechanical parts Manual packaging of any kind Sort by certain criteria Visual inspections Settlement rate 6 € As a service provider we organize the logistics and transportation for your products and goods directly into your factory or at the delivery address specified by you. Also special transports with oversized workpieces, and the organization of Express shipments are among our services. The Wekro outsourcing GmbH in 2008

We offer a complete range of precision turned parts. Production of small to large series from all known Cutting steels, case-hardened and tempered steels, all non-ferrous metals, stainless materials and all plastics. On request, ready for installation, with all the heat and surface treatments. Of course, with all required quality documentation.

CNC P&K d.o.o. is a family company which has been successfully operating in the metal processing industry since 1976. Our main activity is the serial processing of high precision components, in particular for the automotive industry. Our company is always ready to take on new challenges. We look forward to your enquiry! SALES STRATEGY Our company’s strategy is to constantly fulfil our clients’ needs through the production of quality products at affordable prices. With regard to the fact that through quality products and operation we have, in the last decade, earned the trust of foreign clients in a demanding automotive market, we will continue to invest in production development and modernization and, therefore, continue to meet all our clients’ demands. What has been achieved in the last decade certainly cannot be ignored. Our strategy is to stay among the best.

We are a young company founded in 2016 with the aim of optimally satisfying customer needs. Our range of services includes numerous activities in connection with CNC technology.

We LINDUSTRIE GmbH are the manufacturer of special machine parts typical for machine components. We now also represent two top manufacturers of hydraulic cylinders and springs from China.

The company VALEM LTD - Pazardzhik was established in 1997 to retrofit and trade in universal and CNC machines. Our main activities are: METAL PROCESSING with CNC MACHINES – milling and lathe parts; PRODUCING of GEARS and PULLEYS; RETROFIT and SERVICE of CNC machines; TRADE with universal and CNC machines. The workshop of the company is located in the town of Pazardzhik, square Glavinitsa. The qualification of engineering and executive staff allows the execution of a variety of metalworking services and service activities. We are proud of our manufacturing of parts out of aluminum and steel with complex shape and high precision.

ILLMEYER ZERSPANUNGSTECHNIK is a young company that offers TURNING and MILLING of various machine elements. In addition, we also enable repairs of all kinds of components. Both processing options are possible within the following dimensions: Turning up to: Ø1100mm L= 8m Ø1600mm L= 500mm Milling up to: L= 450mm B= 350mm H= 300mm I would be very happy if you could count on me as a reliable partner for processing in these dimensions.

Uslugi projektowe i CNC was created in 2020 as a job and product shop in Tczew, Pomerania in Poland. We would like to provide in house flow of complete machine shop operations. This approach optimizes our manufacturing processes, reduces cost and provides quick delivery. If you require medium to low production runs or prototypes, we are able to provide these services.

Spin Technologies, located at Jupiterweg 21 in Leeuwarden, is a leading provider of precision CNC turning services. Specializing in machining steel, stainless steel, and aluminum, we serve a wide array of industries, including automotive, food processing, sustainable energy, maritime, electronics, and turbines. Our mission is to deliver top-quality CNC solutions globally, with a particular focus on turbochargers. By combining advanced technology with deep automotive expertise, we aim to supply high-performance parts that drive efficiency and innovation across diverse sectors. At Spin Technologies, our commitment to excellence is rooted in our values: precision, reliability, and a passion for engineering. Our machining workshop is physically based in Croatia within the European Union, and with as long and varied of a history such as ours, we naturally remain committed to providing efficient, high quality CNC products and services to both independent and industry-leading clients across the world.

MJCF is geared towards providing chipping machining solutions, especially for revolved parts in any type of material. It is also prepared to provide solutions for parts with a pre-shaped shape obtained by casting, injection, stamping, forging or other processes. We are equipped with a CNC turning center with motorized tools, C axis and Y axis, two bushings and 2 turrets, which allows us to execute complex parts with several operations. We also have extensive experience in precision machining as well as in the area of Quality.

Hollingsworth Engineering is a modern precision engineering company, established in 2020 and located in Lanark Scotland. We specialize is all aspects of precision engineering from one off prototypes to large batch CNC Milling and CNC Turning. We supply to a wide range of industries, including automotive, medical and defence.

Company MRÁZEK-KOVO s.r.o. is specialized in CNC machining and manufactory of rotary parts. For our customers we offer and supply complex solutions according to their wishes and requests with an emphasis on quality of products and appropriate delivery conditions. MRÁZEK-KOVO s.r.o. is a stable family company, which works in the area of CNC machining and metal processing since 1995 and to it´s suppliers and customers acts as a solid long-term partner. Facilities currently represents a new production hall with an area of 2.100 m2. Production focus: —Serial production of rotary parts —Custom machining —CNC turning Production is realized on new Japanese CNC lathes and Swiss type lathes (two-spindle), automatic lathes, single-spindle lathes INDEX RN8 and multi-spindle lathes (Tornos). We primarily manufacture steel, stainless steel, aluminum, brass and plastic. Our parts are used mainly in automotive, furniture hardware, hand tools manufacturing and healthcare.