Schifflechner Maschinenbau GmbH - The Company We are pleased to introduce our company from the region Waging am See / Chiem Rupertigau! Development + construction, mechanical engineering, CNC machining, surface treatment and control technology are our strengths. Convince yourself of our range! Established in 1997 by the master metalworker Martin Posch and Christian Schifflechner, our company continuously developed into an innovative and highly equipped modern engineering plant. Today we distinguish ourselves by customer-specific complete solutions including application support, development, calculation and construction as well as single and series production to final assembly. With 15 qualified and motivated staff, we meet the high requirements of our partners in the fields of mechanical and plant engineering.As a supplier of well-known companies at home and abroad, we stand for precision and quality. Time delivery and cost control are of course for us. The construction of our new office and production building in Waging am See in 2005 provides us with optimal conditions in terms of equipment, order capacity and workflow. Our Services: • Development + Construction • Mechanical Engineering • Special machine • Plant construction (steel and stainless steel V2A and V4A) • CNC machining (CNC turning, CNC milling, CNC saws) • Powder coating • Sandblasting • Glass bead blasting • Sheet metal machining (CNC bending) • Surface treatment • service (installation) • Control technology References / Projects • Tool carriage for stamping plant Car for changing dies up to 20 tons • Roles / chain conveyors, 90 ° Umlenku

As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

LCN has a production area of 18,000 m² with a state of the art machinery park and infrastructure. Our dynamic team develops and manufactures premium quality products in close co-operation with our customers at our plant in Guadalajara, Spain (near Madrid) Fine Blanking Conventional Stamping Tube Cold Forming Rotary Swaging Axial Forming High-Performance Grinding Automated Welding Aluminium Die Casting CNC Machining Plastic Overmoulding Complex Assemblies Safety Critical Handbrake Systems Safety Critical Steering Systems Safety Critical Transmission Park Lock Systems

In the aluminum sector, we at Thöni focus on sustainability and resource-saving processes in the production of high-quality aluminum components. Thanks to our highly trained specialists and highly automated production processes, we are able to consistently guarantee the high quality of our products. From idea to product development to highly refined products, we at Thöni reliably deliver everything from a single source. Your competent and reliable partner when it comes to extruded aluminum products.

Whether tools, gauges, equipment or individual serial - we supply the technology needed by our customers today and can meet the growing demands in the future. We take the position of the communication interface as well as that of the leader. So we make ourselves responsible for the services provided and learn from the feedback. In our technology pool constantly new customer needs to be recorded, analyzed and elaborated problem-specific solutions. Due to the constant improvement in all areas we want to remain competitive in the future and ensure our financial independence. Was the focus and it is to delight our customers through great personal engagement and thus long-term loyalty to us. Mature, promising high-quality products are an essential prerequisite. In cooperation we live according to the following principle: "Customer satisfaction is our highest priority." This, together with our proverbial flexibility sets us apart from the competition.

R.Biemme-Tech was a manufacturer of powder metal structural components. Our main products: structural parts, gear wheel, piston, plug and so on. The strength of its business philosophy, is the ideal partner for development of OEM applications, offering functional solutions, which optimize the total product of the customer. R.Biemme-Tech strongly believes that the productivity boost based on the industrialization of products, is the new frontier of the future in the mechanical field. R.Biemme-Tech has now become a real partner for the development of experimental components and analysis of construction problems, achieving high performance in powder metallurgy and an adequate price / quality ratio. Qualified technical staff will follow the customer during the study, prototyping and commissioning of industrial product. R.Biemme-Tech has as main objective the satisfaction of the customer in every aspect and detail, addressing the different needs, both in economic and technological. R.Biemme-Tech offers its customers: - Service, Design and Codesign - Absolute Transparency Service - Total Service Guarantee Strength and pride of R.Biemme-Tech is the ability of engineering, providing solutions before products. R.Biemme-Tech is responsable for: - perform functional design of complex systems, not strictly related to powder metallurgy - carry out the verification of resistance and structural calculations for the preliminary study of the reliability of the product - industrialize the components and process

Good day We are a company from Poland We would like to offer you cooperation in the areas of laser cutting of sheets, 3D laser cutting of profiles and tubes, bending and much more We are engaged in full metal processing: * Laser cutting up to 50mm * 3D laser cutting of pipes and profiles * CNC bending up to 3100mm and thickness 15mm * Welding: TiG, MIG and laser welding We produce both small series and large projects You can save up to 40% of the price including transport. Send the DXF-STP-DWG file to lasernesta@yahoo.com for a quote We also offer the option of shipping by freight forwarding or our own transport to any location in the world. It would be a great pleasure for us to work with your company, we will take care of every detail of your business.

The CIERRE company was founded in 1970 and has grown to around 95 people. CIERRE is a Subconctractor for the Design and Poduction of Electrical, Electronic and Electrical Equipment. Also services such as the supply of materials; management of the customer’s Material Deposit at us. Links with the Customer’s ERP software. Cierre has a Commercial office, Purchase office; Technical office; R&D office; CIERRE performs Design and Construction of: 1---elektronic, electrical, electrical, equipment (apparatus); 2---wiring of traditional and SMT electronic boards with lines of 30.000 components hour. 3---cables; wiring of single cable; multi-pole cable; SPEVIAL; RESINATED; MOLMED cables; according to customer’s design; signal cables on board Pre-Shaped, with a high number of conductors and then TESTED; power cables up to 240mmq; cables from 0,12 mmq to 180 mmq; flat cables; 4---assembly of POWER electronics; on panels; in cabinet; groups; sub-groups; power semi-finished products; UPS units; Inverters; Power supplies; converters. 5---all about customer specifications and requests; even RHOS. 6---CIERRE is a TUV Certified Sub-contractor ISO 9001; ISO 14000; UL cables.

Our company offers metalworking services. A very wide and complex machine park offers you the opportunity to process various inquiries. We have finished parts and assemblies from a single source, even if we have to procure them elsewhere from our partners near or far from Poland.

We offer our customers a wide range of simple crafts. From assembly to storage and subsequent shipment of the goods to the end customer or seller. We also deal with quality control and storage for stationary stores and online shops. Our biggest advantage is high financial efficiency, as we can do the work for almost half of the usual prices in Germany. We are also a cost-effective alternative to temporary workers or for bumper work. Despite our status as a workshop for people with disabilities, we are able to efficiently process several thousand parts a month. We not only have experience in the automotive industry, but also work for the textile, promotional products, toy, food and medical industries. We would be delighted to work together. So if you want to outsource simple manual work, compilation, rework or the like, we are happy to help.

Kolada Feinwerktechnik is a modern, responsible family company with a wide range of services and a good working atmosphere. Since 1998 we have been working with competence and responsibility not only as a supplier of turned and milled parts but our tasks go far beyond the mere delivery of technical components. Due to the constantly growing machinery and the steadily increasing order volume, the move to our new production and administration building in Kaltenkirchen took place in 2015. On an area of 900 m², we manufacture high-quality precision parts for the aviation, medical technology and automotive industries with our experienced and qualified employees. Our company has extensive experience in processing a wide variety of materials and a wide range of manufacturing options. Our state-of-the-art machinery and our CAD / CAM systems ensure the best conditions for the production of customized and tailor-made parts. In our component assembly we assemble precision parts made of different materials into ready-to-install components. We have been working with competent partners for additional surface treatments for years. The satisfaction of our customers and adherence to delivery dates are our most important corporate goals. Qualified and competent advice round off our service concept perfectly.

Our service options range from simple search work, to screen and pad printing, to complex assembly of automotive assemblies. Manual assembly devices for small quantities and prototypes or the use of system-controlled special machines, we develop ice-specific to be able to connect seamlessly to your production.

Soldering technology & heat treatments Vacuum soldering, inert gas soldering, induction soldering Annealing under vacuum and protective gas Manufacture of complete solder assemblies

Familiar like the department next door. Toll manufacturing with in-house manufacturing. Thanks to our close network of local partners, we are able to offer a far-reaching technological spectrum. We take over your labour-intensive assembly tasks and test systems individually. Excerpt of our services: 1 Manufacturing by machining, bending/edging, laser cutting, welding 2 Assembly of components, assemblies, mechatronic systems 3 Process simplification through sophisticated procedures, simplification of the supply chain law, reduction of the throughput time from the idea to BANF.

VKE GmbH & Co. KG is based in Heidenheim near Ulm and is managed by the managing directors Valentin Klöpfer and Alex Ziegler. The company was founded in 2014 and specializes in the development and sale of innovative, customer-specific solutions in the areas of industrial automation, special machine construction and plant construction. VKE is also a reliable partner in the area of CNC parts production. The company is certified according to DIN EN ISO 9001: 2015 and, in addition to its headquarters in Heidenheim, operates another branch in Iggingen. The offers are aimed primarily at the automotive industry and its suppliers, as well as customers in the fields of process engineering, aerospace technology or the electrical and / electronics industry. Your advantages: -Personal care by a contact person for all services -Short decision-making, fast and flexible -Complete solutions from project planning, construction, manufacturing, assembly, Commissioning up to the training of your employees -Experienced and committed employees -Great vertical integration and lean processes ensure short delivery times -Excellent product quality and high delivery reliability On its website, VKE GmbH & Co. KG offers its customers and visitors detailed information about the company and the products and services offered.

We are a production service company. We take individual steps in production, such as quality control, packaging, repackaging, or the assembly and assembly of your assemblies or products from. If required, we also organize the complete physical implementation of your product, from the procurement of individual parts, through production and warehousing, to shipping. We support you in the production outsourcing. In addition to pre-sorting and set formation, we also undertake the assembly and assembly of your products. From screwing to bonding and the fitting of fittings, from filling with liquids and bulk solids, to functional tests and proper packaging, we undertake a variety of activities. If necessary, we analyze your production processes and identify areas in which we can generate maximum added value.

Steiner Elektronik Ltd is a reliable and recognized partner for the production of circuit boards and electronic components. Services portfolio: • Delivery of circuit boards • SMD/THT assembly • Cable assembly • Assembly of complete devices • Test — AOI, functional and in-circuit test • Quality assurance — ISO 9001:2015 and ISO 14001:2015 • Selective soldering • coating • ESD protection

M u T We bring for you metal and technology together! We combine our years of experience in the metal sector with production technologies in the STAMPING, PUNCHING NIBBLING, TURN, PULL, LASERS, FLAME CUTTING AND MACHINING. Incl. of all known surface systems. Flexibility and high efficiency, we provide you with small and medium batch sizes. We are pleased to be able to introduce our performance on the following pages. We are available for a personal interview. Please get in touch with us. We supply products made of steel, stainless steel and non-ferrous metals. • Stamped parts: 0.5 mm to 20 mm thickness • drawing & bent parts: in all ductile qualities and strengths • Laser Parts: St to 20 mm thick, VA to 15 mm thick, aluminum up to 10 mm • Rotating parts: from the rod or rotational parts • Cut Parts: up to 50mm thickness • manufacturing technology combined components • Modules: completed consisting of punching, turning and milling parts finished to your specifications in 1/1000 mm range • Special profiles: in all ductile qualities and strengths • Raised floor - accessories program for heavy load The economic optimum production process depends on the needs, the required accuracy and, if necessary, by the requested delivery date. Our customers come from: • Construction Industry • Heating Industry • Agriculture • Automotive industry •