A. WENZLER GmbH & Co.KG has produced precisely engineered turned parts for industry since 1962. The company is considered to be one of the leading partners in the automotive and medical technology sector. When Jens Kurzhals, machine operator at Wenzler was interviewed, he said: "Our pieces are not supposed to be good, but excellent.“ He only needed a few words to sum up the philosophy of the company steeped in tradition: We want to move the world forward a little bit with every turned part. s t r u c t u r e: Size of operation: 42 employees, breakdown: 30 in Production, 4 in Administration, 3 in Quality Assurance, 5 apprentice (cutting machine operator) QM System: Certified according to ISO 9001:2002 and ISO/TS 16949:2002 Sales in 2008: 5.0 million Euro Investments 2008: 1 million Euro p r o d u c t i o n: Materials Free cutting steel, case hardened steel, structural steel and tempering steel, rust and acid resistant steel as well as extrusion metals such as brass, copper, aluminium and titanium Further processing Polishing, honing, deep hole drilling as well as all kinds of thermal and surface treatments

We are a company with the highest standards in the area of burnishing, electroless nickel, zinc, glass bead blasting From individual parts to large production runs and special sizes we manufacture for customers from all over Germany. see also www.fun-M.de/Oberflächentechnik

In 1990 Karl Kampka founded his company Karl Kampka – Chemischer Betrieb in a small garage on the premises of his employer at that time. At first consisting of himself, his family and a colleague, over the past few years the enterprise has grown into a company employing more than 60 persons now. Because of the company’s successful work, the production area was expanded from 700 sq.m. to 1000 sq.m. in 2001, separating the black finishing from the phosphating department which had been located in one production building until then. In order to maintain the quality standard achieved and to improve on it, the operation subjected itself successfully to the DIN EN ISO 9001:2000 quality management system certification performed by the TÜV Rheinland. In 2006 the company’s growth made the use of a neighboring building, now belonging to the company, necessary. The existing halls were entirely dedicated to added value production areas and were, together with the facilities, re-built again to suit changed requirements.

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

Tehnomat Inginerie Industriala is a Romanian company located in Cluj-Napoca, it was founded in 1998 and our activity is structered to designs and manufacturing assembly line. specials machines and stations for automotive industry.

NOT ONLY SUPERFICIAL BETTER! This is our claim selbt to us. As a specialist for the surface treatment, we offer our customers the method burnishing, zinc phosphating and manganese phosphating to - quickly, reliably and in a prime Qulaität!

Our company was established already in 2003, when the company was entered in the commercial register. We deal mainly with the metal processing on CNC milling machines. For this activity we have the necessary technological equipment. We use modern technologies of processing on CNC machines. In 2007 we began working metal on CNC lathes offer. The company at this time is 13 employees and is constantly developing.

In Progress

Engineering and Machining precision is specialized in manufacturing and design of mechanical products which based on the use of CNC machine tools (8 Machining Centers, 2 CNC Lathes), as well as precision metal construction (Welding capacity: SMAW, MIG, TIG, ...), (20 welding stations Fronius), (Polishing equipment, sandblasting units, painting units, assembly units). EMP is EN9100 V2016 certified. We have a high skilled and young team able to understand and to meed the higest level of customers expectation upon all standards of manufacturing and construction (ASME, ASTM, GE standards, RR standard....) and we are able to work with all kind of material both imperial & metric. Today EMP have a good reference in flying part with AIRBUS Tier 2 and OEM (Engines) Licencies for Engine tooling & Ground Support Equipment . The main programs reference are: A380, XWB, LEAP 1A, LEAP 1B....... The excellent Geostrategic location of Tunisia allow EMP to get order from all the world and export to any country with a good lead time. The Team is around 200 Peoples most of them high Graduated with international qualifications. EMP have a perfect IT system to manage and control of all processes in real time.The Company headquarter in based in Tunis city (Near the the main Airport), we have a milling site in the same area and the construction activities is based in Sfax within 3 production sites.

Mechanical large parts machining of machine parts with a focus on guideway grinding

AH-Oberflächenveredelung is a small one-man business with a focus on small series painting. Long experience, know-how in the series area. CFK, GFK, aluminum, metal. and much more.

Your partner for sheet metal processing - competent, innovative and flexible! As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard. Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance. Quality assurance goes without saying. The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production. Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products. We are looking for personal contact with our customers, scrutinize all wishes and concerns. Expert contacts and friendliness in all areas are part of our corporate philosophy.

We have learned our craft over the years at machine tool manufacturers, weapon manufacturers, plastic parts manufacturers, electrical machine manufacturers and hydraulic component manufacturers. We worked with multi-spindle and multi-axis machines from single parts to large series. We have been manufacturing in Dottikon since 2008 and are happy to share our experience with our customers.

The Dr. Laure Plasmatechnologie, Research, Development and Production GmbH develops, builds and sells processes and systems for plasma-assisted coating and surface treatment. In addition to optimizing known and established coating processes, completely new processes are being developed from the ground up in order to open up new areas of application for plasma technology. The in-house development of this high-performance plasma generator allows coatings of the highest quality with ALL elements: W, Ta, Re, Mo, Ti, Pt, ... Al, Zn, ... Ag, Au and their carbides, nitrides and oxides The coating of plastic, 3D printed parts is also possible!

We are a strong partner when it comes to metal or steel structures. We manufacture precise individual and series parts for you and offer intelligently designed solutions at fair prices. We are at your disposal for individual advice and planning through to production and assembly. Our services include: • Planning • Welded assemblies • Module assembly • Powder coating • Assembly service

Dear , Let me speak with this brief presentation of the company Leistritz Turbinenkomponenten Belišće doo, a Croatian subsidiary of the German company Leistritz AG With regard to the similarity of our activities in the metal industry, the processing of metal parts for the aerospace, automotive and mechanical engineering industries, we offer you the possibility of business cooperation. In our factory in Belišće we carry out the following operations and manual processing: - Deburring, grinding with belt grinders - grinding and polishing - High-energy vibratory grinding (barrel with 2 Walther Trowal machines) - Visual inspection - Dimensional check - 3D CNC measurement (Global, Brown & Sharp - 4 devices) - 3-axis NC milling (1 piece MAHO 600) We have significant experience in the processing of blades and metal parts for all major manufacturers of jet engines and steam turbines such as Rolls & Royce, MTU, ITP, General Electric, SIEMENS, Pratt & Whitney. As a reliable, high quality and certified supplier, I would like to offer you our services and make them available to you. For a more detailed introduction and presentation, we will be personally available to visit you at the company's headquarters. Waiting for your reply! Best regards, Atila Kerekeš, ing. / Zoran Pepić Quality manager / production manager - procurator Leistritz turbine component Belišće doo Trg A. Starčevića 1 31551 Belišće, Croatia Tel .: +385 31 662 656 Fax: +385 31 662 683

Created in 2015, Gannet Machine Works is a Vacuum WorkHolding & Subcontract Manufacturer for high precision CNC machined technical parts, working for the Marine, Rail and Industrial sectors. We also provide surface treatment and pre-assembly as well as Engineering services such as: Part design & Development, simulation, testing and prototyping. Website & Online Store: https://www.gannetmachineworks.eu/

Steel is our lifeblood - that's us LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019. LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise. The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success. LSV location Landsberg am Lech headquarters At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level. LSV location Oberndorf am Lech The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year. A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain. The youngest LSV location in Meitingen Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

Metal Process 18. May is a family owned business that operates in Gornji Milanovac, Serbia and currently has CNC milling machines and CNC lathe machines. The company's target market is mostly based in Serbia, as well around Europe, such as in Germany and Austria. We plan to expand the locations of deliveries of our services to other Europian countries. Our company is committed to providing the best value for money, fast and efficient service, that brings us good reputation far above competitors. Managing Director Vladimir Obucina, together with experienced and skilled staff intends to provide customers with optimal products to meet customers goals and needs. We continuously challenge ourselves to prove good quality service to customers and exceed their expectations. Metal Process 18. May objective is to find a trustworthy partner that will help us to expand our markets and establish a win-win business relationship. Thank you for your time, and it would be a pleasure to get an opportunity to become a partner with a great company such as yours If you have inquiries please do not hesitate to contact us for any further information. All quotes and orders will be processed as efficiently as possible.

Veltech is an engineering & manufacturing company located in Turkey. With its wide variety of technologies (Machining, turning, welding, coating, sheet metal processing and Heat treatment) on its machine park, Veltech is an AS9100 certified supplier of Aerospace & Automotive companies.