Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Our company was founded in 1992 as a vehicle and metal construction company. From the outset, manufacturing components was part of our core business. At both civilian and military levels, solutions for every application were designed in-house and produced in all materials. From prototype construction to medium-sized series, everything can be realized at our location.

Arpogaus Stahlbau is a mid-sized German manufacturing company focusing on steelwork and mechanical machining. With our ~35 well-trained employees, we produce large-scale prototypes and small series with a weight of up to 20 tons and a length of up to 20 meters. We mainly serve customers from the construction machinery industry.

For more than 50 years we have been working as locksmith and metal construction company in Siegen-Weidenau. Until the end of 2013 as part of "Herling Drahtgeflechte und Konstruktionsbau GmbH", since 01.01.2014 as an independent Metallbau GmbH with around 20 employees, including 4 apprentices. We manufacture welded constructions for mechanical engineering, plant and container construction as well as for steel construction on a production area of approx. 1,800 m². Reliability, high quality, on-time delivery and flexibility are the objectives of every order and therefore a matter of course for us.

Our activities in the field of mechanical engineering range from development and construction to the production of high-quality machines. Engineered in 3D at modern CAD workstations, precision parts are created using milling and turning machines, which are used for individual production and assemblies in small batches. We attach great importance to the quality of our products, the tight production times and our optimal pricing round off the service. Alpintec from Süditrol implements your projects thoughtfully, competently and economically.

We are your partner for the laser processing with a very fast reaction time and punctual delivery. The modern machinery ensures excellent quality.

Our company now has a twenty-year history. We work on 2 buildings, one used for the preparation of components and carpentry, the other for mechanical, electrical assembly and system testing. Our customers entrust us with both the construction of components and semi-finished products, and the construction of complete machinery and plants. Over the years this has allowed us to be able to offer ever more complete solutions to our collaborators. We are able to take care of the realization of the products from the design on customer specification (or co-design) up to the delivery of the finished product, taking care of all the intermediate phases 100%. We create 3D CAD models of all our products to facilitate the interface with external suppliers.

LACURA LASER CUT GmbH — more than 30 years of experience in sheet metal processing with laser beams: An instructive period that has turned us from a pioneer to an expert. If we can do something for you, then we'll do it right! We don't do things by halves; after all, the result should meet your expectations. From the cutting or milling part to the finished assembly: We can help you. On a production area of over 2000 square meters, we handle every single processing step: cutting — punching — bending — milling — welding — that's our thing! We can also do the blasting and coating for you through our partner companies.

Component manufacturer for sensors (inductive, capacitive, optical), M8/M12/M23/7.8” connectors, IP67/IP20 IO systems, PLC controls, 3D profile lasers

Fa DVM GmbH is a relatively young company in Germany, but has been working for many years already with well-known German and European companies. Our establishment is located in the Swabian Unteraspach (Backnang). Fa DVM GmbH is a competent and reliable partner for the trustful execution of: • QUALITY TESTS • ASSEMBLY • REWORK • ZP / ZFP DESTRUCTIVE TESTING / DESTRUCTIVE TESTING • SUPPLIER MANAGEMENT available. Our wide range of methods and know-how are the basis for the successful and efficient implementation of your (potential) outsourcing projects. DVM company was founded in 2007. DVM company is certified to ISO 9001-2008.

CNC milling contract manufacturing We can manufacture plastic, aluminum, brass, copper, steel, stainless steel and tool steel components using a 3-axis CNC milling machine. Key data Minimum component size: 7 x 7 x 7 mm Maximum component size: 450 x 160 x 150 mm Processing in the uncured state (steels) Prototypes individual parts small series Machining strategies Milling Deburring / chamfering Drill Tapping Reduce Rub Thread milling engraving 3D processing Materials plastic Brass aluminum copper steel stainless steel Tool steel

The company Flex-Pro d.o.o. was founded in 2008. The main activity of our company is the development, design, manufacture, installation, testing and commissioning of production plants (including complete production lines) in all industrial sectors (metal industry, wood industry, mining, plastics industry). We are also able to manufacture various types of metal and plastic products to customer specifications, including mass production. The main part of the company's business activity is exports to the European Union, in particular to Germany, and the USA. The majority of our exports are industrial plants, which are manufactured, assembled and tested according to customer requirements. It uses high-quality components from well-known manufacturers and proven quality materials manufactured in the European Union. Thanks to our equipment and highly qualified workers, we achieve very high-quality processing and heat treatment of the parts we produce.

Automation in Austria — we produce automated and partly by hand products. With our flexible automated production line, we can assemble small assemblies very quickly. Our robots are equipped with a flexible "move & plug" system and are used in numerous assemblies. This enables us to enable automated production for our customers without them having to purchase machines and robots.

Across the board By production, we mean the entire chain from purchasing to manufacturing to packaging. The focus is on quality and efficiency across the board. When purchasing, we compare offers on the market & are happy to order directly from the manufacturer. In doing so, we are always a reliable and fair partner for our international suppliers. Production is based on modern machinery, which is designed for small, medium and large series of consistently high quality. benefits: plastic injection molding Die-cutting & forming thread manufacturing magnetize Assembly of components Surface treatment + surface finishing Konfektionierug

Emmecitecnica, based in Leinì (TO), stands out as a leading company in the field of industrial automation and electrical distribution, boasting over twenty years of experience. Its primary specialization lies in the design and production of electrical panels and wiring, offering innovative solutions suitable for a wide range of applications across various sectors. The driving force behind Emmecitecnica is its team of over 50 highly qualified collaborators, operating within production facilities that span over 3,000 square meters. Equipped with cutting-edge tools such as the Perforex Rittal machining center for cabinetry work, vertical warehouses for efficient material management, and numerous stations for cable cutting and processing, the company ensures high-quality standards. Thanks to steady growth supported by the owner’s investments over the years, Emmecitecnica has solidified its position as a reliable partner for major companies in Italy and abroad. Its ability to certify UL panels for the North American market serves as a distinguishing factor that further strengthens its market position. Emmecitecnica has strong relationships with leading electrical material manufacturers, including Siemens, Abb, Schneider, Eaton, and Rockwell. These collaborations, combined with the expertise of its technical office, allow the company to offer highly qualified consulting services to all its clients.

Hieselaar is a full-service metalworking company that helps clients worldwide achieve their ambitions. We have been doing this since 1976, with a team of nearly 130 dedicated professionals. We love to develop together with you. From idea to advice. From prototype to series production. Thanks to short lines of communication, we come up with smart solutions together. Flexibility, customization, and clear communication are always at the forefront. We believe that our connection with you makes the difference. Laser cutting, punching, bending, tube laser cutting, (robot) welding, powder coating, assembly, and more.

The Walter Haverich GmbH belongs alongside the Department Stanztechnikt Europe's leading manufacturers of bicycles and disabled aids corresponding thereto. Of course we are DIN EN ISO 9001: 2008 certified and have extensive machinery that is certainly your needs cases justice. Machinery: Hydraulic presses from 65t to 250t pressure Eccentric from 65t to 300t pressure Stamping presses up to 500 tons pressure we take over the completion of individual modules for you on the Punching out. Drilling, riveting, welding and assembly work can be carried out in our house by specialized staff. Assemblies oriented shopping shortens your internal operations and brings transparency to cost structures.

GTS Gate To Steel GmbH is a German company based in Düsseldorf. We are based in the field of mechanical and plant engineering. Our subsidiary is located in Wuxi near Shanghai. We have been in our line of business in China since 2004. We know the market and business inside and out. Our customers are German companies that sell industrial equipment to China. We are not an intermediary! GTS produces itself in its own hall. GTS takes over the production of the local production portion in China for the customers. We manufacture both entire assemblies and individual parts - it only depends on the needs of our customers. Of course we can also take care of the transport to Europe and all related formalities. We stand for: German quality made in China Know-how protection Customary market prices On-time delivery Our highly qualified team in our own assembly hall, together with a proven network of sub-suppliers, form your extended arm in China. Together they realize your projects in your usual German quality. GTS offers you an all-round carefree package tailored to your requirements.