The history of Ziegler Präzisionsteile in Georgensgmünd starts in 1992 with the development of ambitious special machines and automation systems. The experience thus gathered was essential for the dimensioning of our own production processes and the consultation of customers for part optimisation, material selection, post-processing and finishing. Today, we focus on the high-precision production of ambitious machined parts made of metal matrix composites (MMC) as well as milled parts / turned and milled parts for medical technology, the aerospace industry, motor sports, equipment technology, and sights and mechanical engineering.

- Development / design of devices / gauges -Mechanical manufacturing on 3-5 axis machining centers -Qualification with measurement report generation on CNC coordinate measuring machines All from one hand

precision aluminum die-castings • high/low pressure and gravity die-casting • 34 years experience • highly cost competitive • machining service and surface treatment • engineering and tool-development service • production of complete assemblies service and order managmement from Munich/Germany – cost competitive production in India • highest production standards, state-of-the-art machinery, highly qualified staff • secure and reliable long-term supply chains • express order service • smaller quantities possible • full logistics and warehouse service in Germany

We are manufacturer of farming and dairy machines with high quality and resistance since 2016. Burkon Machinery is guiding the sector by establishing cooperation between university and industry sector with high experience in automotive and engineering fields. Our goal is to turn the high level agricultural technologies to be accessibble also by small enterprizes. Our products and services are offering good solutions to farming and agriculture sectors while covering a wide range. BURKON, who is moving forward to become a serious corporation within short time, is carrying out his connections with his customers in a perspective of a solution partner. Burkon is following to get customers' confidence by always standing behind our machines.

No job too small, no project too big. We see ourselves as an outsourcing partner for any company and any order. We focus on customer requirements and meet your requirements with maximum flexibility. Always aiming to exceed your expectations. Our services in detail: Surface light inspection Assembly Assembly Development of individual solutions 3D printing Die-cutting of adhesive tape / foam molded parts

PROZAX Co.Ltd. was established during the Barum Continental Otrokovice side business privatization. Our main activity is machinery production, namely one-purpose machines and aplliances. The one-purpose operation producing appliances mentined above has ben running since 1965. After the privatization the production character was kept and it was then extended producing switchboards, electrical services and the one-purpuse appliances employed in other branches (e.g. plastic bags manufacture, steel structure manufacture etc.). Production of machine spare parts not made by PROZAX is another section of our production line. Our company assures the appliance manufacture, instalation and offers other services necessary. The main customers are Barum Continental Otrokovice and Continental Hannover. The highest quality of our goods is required and our company covers their requests. While manufacturing we focus on minimum breakdowness of our machines because of non-stop production business of our customers. That is the reason we use top quality material and parts of well-known companies such as (SKF, SIEMENS, BOSCH REXROTH, FESTO, INA, SEW and many others).

we are a company which work on the industrial area and not only. you can find a partner ,in our services , for cutting, bending,milling, painting, treatment. we and our partners ,we make everything for all things what you need.

Time, Quality & Cost TQC stands for the three core indicators of quality: adherence to deadlines (time), consistency of delivery and order (quality) and adherence to the budget (cost). Those who work for TQC have already learned their lessons elsewhere and know how to define, establish and optimize processes so that the above indicators hit the target corridors from year to year. Because that was exactly what drove our foundation and it still is today: We only offer what we have mastered and only sell what can be proven to be of benefit to our customers.

Our service: Geometric measurement of the area or land on which the building will be built, measurement. Computerized static analysis and reporting 3D building models 2D CAD/CAM production and assembly projects Purchase reports for raw materials and fasteners Roof and facade cladding Production: Supply of raw materials and fasteners Turned and milled parts of all kinds CNC nesting CAQuality Control and Reporting Shipping and Shipping Reports Welded or bolted production in the factory D/CAM optimization

We develop and manufacture components both in series and in individual quantities, thereby creating an alternative to existing manufacturing processes. Through highly qualified design know-how and a state-of-the-art machine park, we create products that would not be feasible with well-known manufacturing processes. We serve customers from a wide variety of industries such as mechanical engineering, medical technology and interior design and are a reliable industrial partner thanks to our high quality standards. In all our projects, the customer is always the top priority, because we can only be successful together. As an innovative and modern company, we look to the future with full energy and look forward to many new and exciting projects.

Dear visitor, we are a young dynamic team based in Izmir/ Turkey. We are an engineering company with a focus on vacuum technology and special machine construction. Further, we have professional experience in automatic shelving systems. Through our local manufacturing partners, we can support you constructively and in production. We look forward to receiving your inquiries.

We produce customer-specific, ready-to-connect cables, cable bundles and complete cable harnesses with plugs, contacts or wire end ferrules in-house. Here, plugs and contacts are processed using crimping, soldering, screwing and insulation clamp technology. Our extensive range of customer-specific cable assemblies ranges from simple stranded wires, coaxial cables, control lines, ribbon cables and round cables to power supply cables and complex cable harnesses. Data cables for data centers cabling are also part of our production (Cat. 5e (Class D), Cat 6A (Class EA) patch cable. We also supply OM2, OM2+, OM3, OM4, OS2 fiber optic cables in single-mode and multi-mode in accordance with ISO/IEC 11801, EN 50173-1, -5. Our production focus is on small and medium-sized series; however, we are also able to service large series with efficient external partners. Our internal processes and production procedures are controlled and monitored through our EN ISO 9001:2015 certification. In doing so, we use modern manufacturing and testing equipment, which we use to subject the manufactured products to a 100% final inspection (optical and/or electronic). The final inspection is carried out in close coordination with our customers. This can be proven by special test reports and electronic documentation for traceability. Short delivery times and the implementation of individual customer requirements are our strengths. Profound advice and support from development to the creation of prototypes to series production are a matter of course for us.

We are a master managed welding company that specializes in the production of stainless steel and steel structures. In addition to steel structures such as railings, handrails, canopies, stair structures, balcony structures, plant construction, in particular steel construction and pipe construction, is also one of the main areas of activity. In the area of steel construction, we manufacture frame structures, stair and platform structures, as well as route substructures and brackets. In the area of plant engineering, we offer a complete package from the procurement of materials (steel and pipeline material, as well as fittings/components), to the production of frame structures and pipeline assemblies, to the assembly of pipes and fitting/ components on the frame, to form a unit (plant or unit).

see for yourself

With more than 30 years of experience and expertise, we are one of the leading Austrian companies in the areas of laser machine technology and profile technology. We are currently experiencing exciting yet challenging times of change. That's exactly why it's important to know that you have strong business partners you can rely on. Metal and sheet metal processing is our trump card — we are happy to be your personal contact!

Dear ladies and gentlemen, We, Sauerland Metall Technik GmbH, are a young sheet metal processing company from Sauerland. We are able to produce laser/edged parts and nibble/edged parts, we also have various press-fit centers with which we can provide sheet metal parts with almost any type of press-fit elements, we also offer MAG, MIG, WIG, laser welding and spot welding, and we also have a second location where we assemble complex components. We also work with a variety of regional and supra-regional coaters so that we can also offer our components powder-coated, KTL coated, galvanized and screen printed. In other words, we offer everything for our customers, from simple sheet metal parts to complex, fully coated assembly and welding assemblies. Our customers come from the automotive, electronics, renewable energy, charging infrastructure and mechanical engineering sectors. We would be delighted if we could also welcome you as a customer in the future. If you are interested in working with us, I would be happy to send you our company presentation and will be happy to answer any questions you may have. We are looking forward to your feedback. sincerely Tim Wagner Sauerland Metall Technik GmbH

We offer comprehensive assembly services from simple parts assembly to complete module assembly. This includes: Assembly of small parts and assemblies up to a size (LxWxH) of 0.8 m x 0.8 m x 1.6 m. soldering and welding work, Wiring and cable assembly as well as sorting and reworking. Hydraulic and pneumatic work. If required, we will handle the complete procurement of purchased and manufactured parts, including surface and heat treatments, as well as the subsequent quality control and packaging of your goods. Our services are designed to relieve your business and flexibly expand your capacities. With our comprehensive expertise and focus on the highest quality, we ensure that your projects are completed on time and in the best quality.

Sagemcom Dr. Neuhaus – EMS Manufacturing in Rostock, Germany At its Rostock site, Sagemcom Dr. Neuhaus operates a high-performance, certified manufacturing facility for the assembly and production of electronic modules. With over 35 years of experience in industrial electronics manufacturing, the company provides reliable and scalable Electronic Manufacturing Services (EMS) tailored to the requirements of demanding industries. The facility supports customers from sectors such as energy, medical technology, industrial electronics and communication systems. Production runs 24/7 in a 3-shift model with two fully automated SMD lines, supported by comprehensive quality assurance and process control. Our services include: SMD and THT assembly (single- and double-sided) BGA assembly and rework In-circuit, functional and climate testing Potting and conformal coating Final assembly, programming and logistics Prototypes, small and large series production Key strengths: High process stability with 3D AOI and SPC monitoring Engineering support during the development phase Seamless integration with customer processes and systems Certified according to ISO 9001, 14001, 27001 Site profile: Rostock, Germany ~1,500 m² production area 3-shift operation Up to 10 million SMD components per week With a focus on precision, reliability, and technological expertise, Sagemcom Dr. Neuhaus supports its partners across the entire product lifecycle – from the initial concept to the ready-to-ship electronic module.