Materials A demand-sorted material storage provides the conditions for short delivery times, maximum flexibility and punctuality. Also, the materials used, the quality plays a decisive role: For use only high-quality cold-rolled strips reputable, certified mills come. Materials are processed from 0.05 to 10 mm thick and coil widths up to 400 mm. The range of materials includes the following qualities: Unalloyed steels according to DIN EN 10139 Hardening steels according to DIN EN 10132-2 Quenched and tempered steels according to DIN EN 10132-3 Spring steels according to DIN EN 10132-4 Stainless steels according to DIN EN 10088-2 Aluminum and wrought aluminum alloys according to DIN EN 485-1 and DIN EN 485-2 Copper and wrought copper alloys according to DIN EN 1652 and DIN EN 13599 Hard paper, pressboard, plastic Toolmaking The quality of the tool is one of the most important prerequisites for trouble-free and efficient punching parts production. The tooling of E. Winkemann manufactures tools with highest precision. The field of tool / construction is equipped among others with the following devices: 2D and 3D CAD systems in the field of tool design CNC EDM, drilling, milling and jig grinders with CAM connection The exchange of design data is in IGES or DXF format. For around 6000 are consequential, composite, flexural, and embossing tools or total cuts available. Stamping technology The stamping of E. Winkemann is equipped with a powerful machinery, responsive to the diverse areas of use and the materials to be processed. The machines range from mechanical or hydraulic punching machines and presses to various bending machines: Hydraulic machinery and punching machines (25 to 500 tons) Eccentric (10 to 35 tons) Hydraulic presses (15 to 200 tons) Punching and bending machines (up to 15) Stamping machines (up to 200) Fine blanking machines (up to 700) Fineblanking / cutting The fine blanking allows the production of precision parts with smooth cut surfaces and high dimensional accuracy. Costly rework can be omitted. Straight-cut percentage up to 100%. The fine blanking machines with max. 320 tons pressing force can process material thicknesses up to about 7 mm. In addition, there is also the possibility of products on fine blanking machines with max. To process 700 tons press force. Flatting If the required thickness tolerance or flatness can not be achieved by cold rolling with the primary materials with a thickness of 0.8 mm, the parts are ground flat. The result is a thickness tolerance and flatness of ± 0.005 mm. High demands of these parameters are primarily intended for products which are used for example in units and transmissions. Representing this are start-up, passport and shims to call. Fine grinding Slices or moldings with a thickness of 0.8 mm and an outer diameter 4.0 mm könnnen be honed for maximum precision requirements with a tolerance of ± 0.001 mm. Post For the post-processing of the products are modern, electronically controlled and linked compensation and processing equipment available: Fully automatic compensation system with process data acquisition and batch documentation Program-controlled systems for automatic vibratory deburring Washing and cleaning equipment Machines and assembly equipment for drilling, tapping, riveting, stamping and assembling. Surfaces All parts ...

With a presence of over 27 years in the German market, we are committed to providing high-quality services and paying attention to every detail of our projects. We are recognized for our professionalism and seriousness, the high quality level of the products and services offered, as well as the prompt response to inquiries and the delivery of ordered products and services. Services and expertise: Design and Verification: We offer comprehensive PCB design and verification services. Our team of specialists helps you develop optimal technical solutions for your specific needs. Digitization: We stay up-to-date with the latest technologies in digitizing documentation and processes to ensure that your PCBs and data are managed efficiently and accurately. Pre-production: Our experience in PCB verification is one of our main advantages. We ensure that every aspect is considered before the actual fabrication of printed circuits. Highest Quality PCB Execution: The quality of the PCBs we provide is recognized and appreciated in the Romanian printed circuit market. We adhere to IPC 600 and IEC 326 standards, and our specialists are certified in accordance with the IPC-A-610 standard. Quality Commitment: With pride, we guarantee excellent quality! Our qualified staff, UL certification, and ISO certification are evidence of our commitment to maintaining high-quality standards to meet the expectations of our customers. No matter how complex or simple your projects are, we are here to help you realize them. With an experienced team in data preparation for manufacturing, we guarantee efficiency and precision in every project. This allows us to produce PCBs ranging from the simplest to the most complex, with up to 28 layers. Over time, we have had the opportunity to produce printed circuits in all fields of activity, collaborating with both local firms and multinational companies. That is why we are proud to develop customized PCB solutions that perfectly meet your needs and offer you materials of the highest quality. From FR-4, Aluminum, Teflon, Copper core, Polyamide, and Rogers to Flexible PCBs and Rigid-Flex PCBs, we have the expertise and resources to use various specialized materials according to your requirements.

Dr. Franke GmbH & Co. KG are nationally and internationally as recognized partner in the field of stamping and forming. The field-proven know-how is based on a many years of experience from the beginnings of plate lock- technology to modern technology in sheet metal forming. Here you have a dedicated development and Staff team is available that with sound knowledge a wide range of manufacturing dominated alternatives. ° STAMPING ° DEEPDRAWING ° FINEBLANKING ° WELDING ° MOUNT ° COATING ° CONSTRUCTION ° TOOL ° PROTOTYPE With individual, custom manufacturing for large- and small series presents Dr. Franke GmbH & Co. KG is the constantly changing product and logistics requirements of the international industrial Only by Dr. Franke documented real customer focus.

As experts in metalworking, we produce tools, molds and parts for you that you need for your individual application. In addition to classic and demanding toolmaking, we have primarily specialized in wire EDM. Wiring or eroding is a very accurate process that requires the greatest care. Of course, turning, milling and grinding are also part of our everyday work, which we integrate competently into the ongoing production processes.

Our Company For nearly 70 years the company Gebr Unglaub + Co. GmbH produces metal goods. One year after the company was founded in Niefern at Pforzheim by the brothers Friedrich, Hans, Heinrich and Otto Unglaub already follows the company's first expansion by opening a branch operation in Zeutern in Bruchsal. Business purpose of the two companies is the production of turned parts. In 1940, a tool and fixture is affiliated with Production machines for the production of cold forged parts. The company also established with this group of products on the market, so that the further diversification nothing stands in the way. The establishment of a metal spinning and fabrication shop in your own home allow for the non-cutting shaping the extruded parts as a third product variant. The following years are the expansion and stabilization of the business, that is by using the latest technologies and well-trained professionals, for the production of parts of the highest quality and precision today. Our objective is always to find solutions together with our customers to produce and, therefore, contribute to the creation of competitive advantage high quality products as part of an optimized production process. Our program Our production program includes: * Technical extrusion and stamping parts * Machines and CNC turned parts * Paint Cups * Tool and fixture manufacturing ... and of course everything with full-service brand Unglaub. Our products Wherever you can imagine the use of forged parts made of aluminum and copper, we can offer you solutions. We have a very high degree of vertical and are fixed with our products either on specific industries or specific applications. Our custom manufacturing in connection with the development and production of the necessary tools gives you the advantage to move parts of your problem-solving processes to us your suppliers and specialists in this field. Take a look at our product range: * CNC Turning * Fließpressteile * Filter * Color Cup * Pressure Vessels * Also Turning we do NOT mass produced, but have moved us here on the production of high-precision parts according to DIN or factory standard. We work on almost all metal materials, including a variety of stainless steels. Another field are our color cup and pressure vessels, which we can depending on the application in different sizes and both aluminum and stainless steel provide.

We produce plastic profiles from all standard thermoplastics for different industries forth (electrical, automotive, furniture, DIY, ...) Our range extends from 50gr/mtr to 8.000gr/mtr. Furthermore, we have a special program to furniture roller shutter and angle profiles. In addition, we can offer the erosion of parts made of steel, aluminum, brass as an additional service.

ALAT is specialist for construction and production of precise tools for metal forming by plastic deformation, molds for injection of synthetic materials and non-ferrous metals. We own an 100 ton eccentric press for production of parts from sheet metal. In cooperation with our neighboring companies we can offer production on presses up to 400 tons, and quality surface protection of parts.

KINEX Bearings Division belongs with its portfolio among important global suppliers of standard and special rolling bearings aimed for beddings in various industrial applications. The main task and goal is to ensure supplies of complete bearings assortment manufactured in individual plants of Bearings Division, to develop cooperation with customers and to provide them services in accordance with their requirements. In order to achieve a maximum satisfaction of our customers and to react flexibly to market requirements, the Bearings Division integrates R&D, engineering, manufacturing and commercial activities. The history of bearings production in Kysuce region enjoys a long-term tradition. The Bearings Division commands over more than 60 years of experience in the production of standard and special bearings, a progressive production technology and own technical know-how. It offers a high product standard and quality under KINEX brand. Manufacturing companies of Bearings Division produce ca. 8.000 types of bearings modifications aimed for use in various industrial branches. Nearly entire production is directed via trading company KINEX BEARINGS, a.s. to foreign markets. Plants of the Bearings Division have a developed Quality Management System compliant with process-oriented standard ISO/TS 16949. At the same time, the Quality Management System is provided pursuant to standards EN ISO 14001concerning Environmental Management and BS OHSAS 18001 concerning Occupational Health and Safety.

BOES GmbH Präzisionsstanzteile manufactures stamped parts, drawn parts, bent parts and stamped grids from stainless steel, unalloyed steels, all common non-ferrous metals and their alloys. We also manufacture plastic-injected stamped parts, so-called hybrid parts. Our manufacturing capabilities are for material thicknesses between 0.05- 6 mm, with a pressing force of up to 250 tons.

we started to production and spent time to understanding'' precision'' and it was our exit point and enter point the issue and We made our disicion and built to company benk metal today our comnpany well knows company as precision part producer in domestic market and international market we have been giving service to medical equipment ,defence earospace,automotive,power system ,...... As a company, we always follow the latest technology and re-establish our company according to these developments benk metal a family based company at Turkey in Kayseri city our closed area 2000 m2 20 cnc machines 30 qualified person we already give service our customers i

Through 15 years of experience in the machining area we are up to any challenge. We know the special needs of the manufacturing industry and address these with maximum flexibility. If it is necessary, please contact us at night or on the weekend, the corresponding remarks. In the implementation we are available in all areas with high know-how available, be it the 3-D structure of the desired parts, advice on cost-effective realization or technically high-quality production of turned and milled parts.

Do you need punched parts on the strip? With or without galvanic surface refinement? We specialize in the production of complex punching and bending parts, especially in the miniature sector, on the belt. The parts are rolled up on reels and can be integrated directly into the production process. As a partner of well-known companies in the electrical and automotive industry, we manufacture on our punching and bending machines from all common non-ferrous metals (as far as they are suitable for punching and bending). The typical end products include, for example, miniature switches, also with the required surface treatment. We process all non-ferrous metals for your application, eg: > Copper > Brass > Bronze > Stainless steels > Blank or even refined (eg, silver, gold, tin, zinc, etc.) > Individual according to your requirements, please ask us.

At the location of KME in Osnabrück, we manufacture follow-on composite tools at the highest technical level and demanding stamped, contact and bent parts as well as subassemblies in close cooperation with our customers. We produce the required raw steel strips of copper and copper alloy in our own foundry and our own rolling mill. But even before that starts our service for you. In addition, we offer you all steps of the complete process chain in cooperation with you: advice on material selection, the best possible manufacturing process adapted to the material, surface finishing, packaging, automation, coupling to follow-up processes in your house as well as material recycling and metal handling. Always under the motto "Everything from one source". This closes the production cycle, saves interfaces, effort and, above all, costs - important factors in increasingly demanding competition. We meet your quality goals and requirements for environmental and occupational safety as well as the associated environmentally friendly use of energy through successful certifications in accordance with IATF 16949, ISO 50001, ISO 14001 and OHSAS 18001.

we produce in our wide network. Our focus is on project management and process management. Due to our network, we can deliver inexpensive production in the desired quality. Controlled by professional project management.

Eickworth Modellbau GmbH Construct Since 1920 we design and manufacture molds, tools and devices for the automotive and aerospace industries. Here we offer the highest level of competence and service. We work in a variety of methods, all conceivable materials, from plastics to hardened steel. Our employees are highly skilled workers in the areas of model and tool, who qualified as specialists in the fields of CAD design, NC programming, CNC machining and 3D metrology. Through our long-time employees as well as our certifications and approvals we are has been a reliable partner for our customers.

Design and tool Injection molding tools (pilot and series) Stamping and forming tools Jigs and fixtures Precision machine components Production of individual parts and small series Pattern part manufacturing

Mold production. casting. Forging. Where we come form AS-MOTA was founded by creative-thinking university and PhD students, back in 2009. Even in the time of their first projects, they set ambitious goals to achieve. As a result, they managed to implement tools such as the copper rotor and the i-knife as a basic device of their everyday work. Thanks to the company's innovative attitude, over the last ten years AS-MOTA has been constantly increasing the number of own technical platforms, in order to be able to perform creative machining solutions. Where we are heading to We believe in the power of inventive thoughts. In order to achieve our goals, we learn the lessons, we are determined to improve. AS-MOTA is merging together the objective experience - coming from the constant process development intention both on the personnel and on the business sides -, with the innovative and intuitive attitude. The company provides this quality package to each customer. We believe in strong cooperative partnerships. We wish to provide the best possible solutions accomplished by our motivated team working on stable but constantly developing machine-park