The Knupfer Metal Processing GmbH is a sheet-processing supplier for the machinery and special machinery for air conditioning, ventilation and suction technology, clean room technology and the automotive industry and has worked for over 50 years. We manufacture sheet metal parts, machine covers, protective covers, enclosures, machine bases, machine body and complete assemblies from lot size 1 steel, stainless steel and aluminum. Our high-tech production in-house include: Laser Cutting (Automated high-bay warehouse) The following material can be cut: steel up to 25.0 mm, stainless steel up to 20.0 mm (oxide-free), aluminum up to 12.0 mm material thickness. The max. Machining size is 3000 mm x 1500 mm. All three stocking systems are connected to an automatic high bay warehouse with 220 storage bins (3 tonnes storage capacity). We are thus able to cut during the night shift without staff. Water jet cutting 5-axis machining of steel up to approx80 mm, stainless steel up to 80 mm, aluminum up to 100 mm - other materials such foam, plexiglass, plastics, glass, stone, sealing material, composite materials, wood, etc. possible. The max. Machining size is 3600 mm x 2000 mm Bending Pressing force of the CNC press brakes: 1 x 320t, 200t x 1, 1 x 36t ACB angle sensor available, 3-point bending is included as standard, Folding Machine in use Nibbling and punching Steel up to 6.0 mm, stainless steel up to 4.0 mm, aluminum up to 6.0 mm The installation of ventilation gills, beading, perforated grids, rows etc. is easily possible Welding (Manually or with robots) MIG / MAG and TIG, spot and stud welding (threaded bolts and sleeves), welding robot with rotating and tilting table for components up to 5000kg unit weight. These saws, laps, mech. Machining (milling, turning, drilling, threading), production of flange rings according to DIN 24154 and angle rings to DIN 24155, as well as special rings and segments and paint the assembly and completion according to the surface treatment (powder coating, galvanizing...).

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA

For over 20 years we have been very successful in the industry. For the rapid implementation - from single pieces to mass production - we use the latest technologies. Together with our motivated team, we are a strong partner of mechanical engineering and automotive industries To find solutions is our strength - to overcome difficulties our standard

Located in the Metrolpolregion Stuttgart, we develop and manufacture for decades a wide range of industrially manufactured products of wire, tube and sheet metal. You will receive individual and customized solutions. From the first conceptual step to delivery, we support with our expert staff. Bent wire parts and technical articles Since 1963, we present ourselves as a modern and competent manufacturer of high quality products made of wire The wire parts are manufactured exactly according to customer's drawings, also in combination with pipe and sheet metal. • Quick and inexpensive, we produce your parts from 2mm to 10mm diameter • made of steel (ST37) or stainless steel (1.4301) • on CNC 3D or 2D bending machines. Our decades of know-how in the wire processing, as well as our own tool and fixture supports fast batch production of your parts. For further processing of your parts, we offer a wide variety of surfaces: • plastic coated • galvanized / plated • Nickel-plated • electrolytically polished • blasted If you wish, our quality control checks, and documents your wire parts up to 100%. We will pack according to your requirements and deliver on time to the required delivery date. Send us your data in formats DXF, DWG or in other 3-D formats (eg SolidWorks, Solid Edge, Catia, Pro-E, etc.).

QUICK INFORMATION FOR ASW GMBH Service in sheet metal forming of steel, stainless steel and aluminum from 0.5 to 25 mm Complete machining of punching, laser cutting, folding, welding through to finished growing Oberlächbearbeitung. (Powder coating, electroplating galvanizing, hot-dip galvanizing, etc.) Certified Enterprises by Qualtitätsmanagment DIN ISO 9001:2000 Environmental management ISO 14001:2005-06 Welding Credits: "Big sweat proof" DIN ISO 3834-3, DIN 18800-7:2002 With about 100 skilled employees, implement your small, medium or large series! With references in the craft, engineering and large-scale industry.

As a medium-sized metal processing company with about 60 employees, we have been operating for over 50 years as a supplier to the furniture industry with a focus on kitchen manufacturing (industry and trade) as well as office furniture. From our market experience, we have developed a kitchen accessories / Standard program with which we meet almost all the requirements of metal components for furniture production.

Founded in 1966 by Erich Schötz, father of the current managing director Markus Schötz, the Erich Schötz GmbH is a modern, powerful, medium-sized companies in the metalworking industry. Since 1997, Erich Schötz GmbH has specialized in the fields of promotion to Store systems and displays and has grown to become one of the leading display manufacturers due to their multi-faceted production depth. Since the formation of Erich Schötz GmbH stands for us the desire of the customer is always in the foreground. This means for you: - Customer-conscious care by a friendly and motivated team - Individual and future-oriented work in every project - Cooperative partnership between you and Erich Schötz GmbH - Controlled production of your project to packaging and logistics Here is an overview of machining options: Development / construction Laser Technology CNC - Punching technology CNC - Forming Welding Powder coating technology Screen printing Assembly of mechanical and electrical components CNC - milling of plastics and wood materials Thermal deformation of plastics Service - Logistics - CNC laser dance technique steel up to 8 mm, stainless steel / aluminum up to 4 mm thickness - CNC Bending up to 3000 mm length / rolling technology up to 1500 mm length - Welding in GMAW and GTAW process - Powder coating technology max. Size H

Who we are Founded in 1904 as a small company, we have developed into a powerful medium-sized companies in the metalworking industry. Business far beyond the borders of Germany, Denmark, Sweden, Austria and continue to talk of the reputation of our company. What we offer We offer a wide range of stove and fireplace accessories and household goods of all kinds We also offer Punching up to a force of 125t, gas metal arc welding, spot welding, powder coating and the production of 2 or 3-dimensional wire bending parts as services in our company. Our goals Satisfied customers, as well as flexibility in our product range are self-evident for us. Accurate delivery date and a consistently high quality of our products are a must in our company. We hope to have piqued your interest and look forward to a good cooperation.

Sheet and Tube Processing Special in all metals

Since 1992 our company has been dealing with the cold bending of hollow sections. All started in the first half of the ‘90s when we intended to produce bent-metal furniture. After having mastered the bending technology of ordinary tubes made of constructional materials, we proceeded to a more demanding technology of the bending of thin-walled tubes having the bending radii under 2D of the tube diameter. Using special tools, such as ball mandrels and smoothing devices, we are able to achieve high quality of a bending both from the visual point of view and in maintaining a minimum tube diameter deformation. We obtain similar results not only with materials made of construction steel, but also with materials made of anti-corrosive steels and aluminium alloys. We also get good results with the bending of square and rectangular sections. The main part of our production program consists in products manufactured in cooperation. These are components of shop equipment, protective frames of cross-country cars, series of various bent holders, frames, reinforcements of agricultural machines and injection piping. Other supplementary technologies are grinding of tubes under chrome, tube and section twisting, horizontal forging, MIG and TIG welding. At present we have been looking for partners to be able to use the full capacity of our bending machines.

If You have any interest in free brazing capacities please contact us. hereby We would like to present our company BIAL d.o.o. from Slovenia. As a producer of Towel warmers, (Tube radiator's- Rohrheizkoerper) www.bial.si in our production we have allso machinery for brazing. Hereby We would like to inform You that in our production we are able to braze different steel parts. Up to dimensions (height 150mm, Width 1300mm, Lenght 5000mm) Brazing is made in the furnace at 1090 degree in endothermic atmosphere. If you produce light or medium weight parts where low cost, high volume production is required, conveyor furnace will process your work efficiently and economically, typically free of oxidation and discoloration with less scale than other processes. The furnace is particularly well suited to continuous production line operations accepting parts ready for heat processing and discharging them ready for assembly or packaging. Because the furnace can be utilized for many heat processes, it is widely applied for parts or assemblies used in volume production industries such as automotive, home appliance, electronics, aircraft and hardware.

BTE - bending technology and engineering - we offer the best solutions from a single source. From design to production readiness of your products you will be served by our knowledgeable specialists. Saws - forming - bending - welding - each operation is performed to the highest quality standards. We process pipe diameter 4-130 mm made of different materials to form 800 Bending radii ratios from 1:1 are not a problem for us and is welded with modern welding robots. Our name stands for cost-effective quality products from prototype to mass production. BTE - We bring pipes in shape. Inert gas soldering Bending parts Tube End Finishing - Sawing, deburring, washing - Bending More radii between Ø 4 mm - Ø 130 mm - Forming of pipe ends - Cutting, stamping, punching with system tool - Inert gas brazing - Welding TIG, MIG, MAG - Installation of all kinds of conductors with interior cleaning - Sandblasting of small parts - Processing of micro-volume series and batch sizes Turn - 7000 different bending parts - Over 500 different tools - Customize in Dimensions Ø 4 mm - Ø 90 mm - CNC - machines, mostly automatically - Processing of round, flat oval and profile tubes - Coupling to 3D - Metrology Transform - Formed in 2500 various -

The Hessel Metall + Plastic GmbH is a medium-sized company based in Berlin and currently employs 20 people. Our core business includes the complete machining of components and parts. We manufacture small and medium series, but also in pilot production and in the manufacture of individual parts are our strengths. The Hessel Metall + Plastic GmbH is certified according to DIN EN ISO 9001:2000. The production takes place on modern CNC machine tools with which we can produce both series and also items economically and on time. Our company has the following machine types: CNC - drilling and milling centers with up to 5 axes CNC - lathes, CNC - Laser cutting equipment, CNC - Bending machines, 3D - measuring machine, NC - lathes and machines of conventional plastics - and metalworking.

MGI Quality Tubes creates seamless, high quality non-ferrous tubes using a combination of modern and traditional technologies. Whether you require a basic product or special alloy compounds, MGI always delivers according to your exacting standards. MGI's extensive tube engineering capabilities mean that we can deliver quality components or complete products. From development through manufacturing, packaging and logistics, MGI Tube Solutions offers world class tube technology.

Spezialised in pipe, tube and plate works. Competitive in medium series (500 units ideal). Laser cutting. 3D laser cutting up to d508mm and up to 3200x1520x600mm. Pipe bending up to d130mm. Waterjet cutting. Plate bending and punching. Automatic welding. ALL CNC.

This distinguishes us from other manufacturers What differentiates a good supplier of a less good? This you will have probably already asked so many times. We do not know what criteria are important to you. But maybe you are interested in our response: • There are people who operate the machines. • There are people who enter the date you promise. • And there are people who make you quality commitments. Look about the people behind the machines in the eye. And if you look us in the eye, then you will discover 25 highly motivated skilled workers to the company's founder Reiner Gienger and his son Alexander Gienger, the one thing: We are proud of our work and inspire us for metal. For 25 years we have dedicated ourselves to high-quality metal processing. Now in its second generation, we realize even the most unusual designs for our customers. And if it is really tight times, we are working day and night and over the weekend. Technically competent and on-top equipped with: Highly complex components made of steel, stainless steel, wear parts and aluminum are today in metalworking enormous demands on the manufacturing process used, to machines, tools and the know-how of our employees. Highest precision, tight tolerances and piece by piece are the prerequisite to meet the stringent requirements of our customers. Of course, all parts are manufactured to your specifications and drawings Gienger Metal. With our know-how your ideas into reality with us.

AGRIKON ALFA Ltd. has been engaged in designing, manufacturing and distributing stainless steel and carbon steel equipments for customers all over the world for all kind of projects. Keeping in view outstanding quality. AGRIKON ALFA Ltd. wants to meet the requirements of the individual market and is also striving to meet the expectations of the customers completely.

welding work ■ Execution according to regulations and standards/guidelines: ■ ISO 3834-3 ; ISO 5817 ■ FW3 after AGFW ■EN13480 ■ BTGA Connection of your industrial machines ■ Site welding work ■ Installation of buried pipelines ■ Lightweight steel construction ■ Made-to-measure steel and stainless steel railings, including assembly On-Site Service ■ Connection of your industrial machines ■ On-site service ■ General pipeline construction and assembly nationwide

Laser Cutting / Sheet Metal We are three laser cutting machines Trumpf available. Thus we have the opportunity, extremely flexible to process your orders and to respond to obvious delivery. Our processing spectrum is as follows: Metal foils with thicknesses well below one millimeter or sheet thicknesses up to 25 mm - TRUMPF Laser cut everything consistent with the known quality and reliability. The cut edges are burr-free, the kerf narrow and strictly limited the heat affected zone. Turning / milling / drilling In the field of machining we can build on the know-how of our qualified staff. These are supported by a total of 8 machines. Of the 4 of us are CNC lathes the company spinners, as well as 3 CNC machining centers for the production are available. Also available is a manual lathe that comes in small series in use. Edge From a simple sheet metal parts to complex curved precision part: the hydraulic CNC press brakes from TRUMPF anything get in shape.The brakes of the TrumaBend V230 stands for flexible and productive folding. For good-quality and efficient folds is developed by Trumpf angle sensor ACB (Automatically Controlled Bending). This bending angle sensor is responsible about measuring out for control of the angle to the desired setpoint. Developed by TRUMPF angle sensor ACB can do both: Measurement and control in the process. Elaborate startup phases of bending programs belong to the past. Every angle is right the first time. The change in the recoil angle by different materials and material properties governing the system independently and automatically. Whether embossed or air bending - the economic Customize precisely fitting parts with tight radii and small leg lengths is the strength of our Trumpf press brake V230: Welding / fixture Because of the many opportunities and special benefits MAG welding is used by us.To name a DC in the first place here is the extremely high productivity in MAG - welding. It also supports us a welding robot of the company IGM. This allows us in a very short time to produce large series of different modules. Since we want as quickly as possible and high quality finished welded assemblies for you, is us, a separate fixture available. Measurement In order to bring the highest quality standards to the customer, the field of measurement technology has been strengthened. The INFINITE arm is the most accurate and versatile articulated arm. Patented rotation axes without rotation limit, fast probe exchange, integrated digital camera, including wireless connectivity and battery power offer unlimited mobility. The main applications are the measurement of devices and welded assemblies. Stahl-Bürstmaschine/Blechbearbeitung "Innovation for sheet metal working" The double-sided Oxidschichtentfernung of lasered sheets in a single step to the risks orReduced costs in manufacturing. Assembly Our production is completed by the "ATTIS assembly line". These are high-quality agricultural machinery (bale wrapper) from Welger. This ensures a high impact strength, excellent and easy operation as well as a unique security feature. Foreign production / external processing For product realization are our highly specialized partner. This applies in the fields of painting, powder coating, galvanize, harden and turn tube.