Located in the Metrolpolregion Stuttgart, we develop and manufacture for decades a wide range of industrially manufactured products of wire, tube and sheet metal. You will receive individual and customized solutions. From the first conceptual step to delivery, we support with our expert staff. Bent wire parts and technical articles Since 1963, we present ourselves as a modern and competent manufacturer of high quality products made of wire The wire parts are manufactured exactly according to customer's drawings, also in combination with pipe and sheet metal. • Quick and inexpensive, we produce your parts from 2mm to 10mm diameter • made of steel (ST37) or stainless steel (1.4301) • on CNC 3D or 2D bending machines. Our decades of know-how in the wire processing, as well as our own tool and fixture supports fast batch production of your parts. For further processing of your parts, we offer a wide variety of surfaces: • plastic coated • galvanized / plated • Nickel-plated • electrolytically polished • blasted If you wish, our quality control checks, and documents your wire parts up to 100%. We will pack according to your requirements and deliver on time to the required delivery date. Send us your data in formats DXF, DWG or in other 3-D formats (eg SolidWorks, Solid Edge, Catia, Pro-E, etc.).

If You have any interest in free brazing capacities please contact us. hereby We would like to present our company BIAL d.o.o. from Slovenia. As a producer of Towel warmers, (Tube radiator's- Rohrheizkoerper) www.bial.si in our production we have allso machinery for brazing. Hereby We would like to inform You that in our production we are able to braze different steel parts. Up to dimensions (height 150mm, Width 1300mm, Lenght 5000mm) Brazing is made in the furnace at 1090 degree in endothermic atmosphere. If you produce light or medium weight parts where low cost, high volume production is required, conveyor furnace will process your work efficiently and economically, typically free of oxidation and discoloration with less scale than other processes. The furnace is particularly well suited to continuous production line operations accepting parts ready for heat processing and discharging them ready for assembly or packaging. Because the furnace can be utilized for many heat processes, it is widely applied for parts or assemblies used in volume production industries such as automotive, home appliance, electronics, aircraft and hardware.

BTE - bending technology and engineering - we offer the best solutions from a single source. From design to production readiness of your products you will be served by our knowledgeable specialists. Saws - forming - bending - welding - each operation is performed to the highest quality standards. We process pipe diameter 4-130 mm made of different materials to form 800 Bending radii ratios from 1:1 are not a problem for us and is welded with modern welding robots. Our name stands for cost-effective quality products from prototype to mass production. BTE - We bring pipes in shape. Inert gas soldering Bending parts Tube End Finishing - Sawing, deburring, washing - Bending More radii between Ø 4 mm - Ø 130 mm - Forming of pipe ends - Cutting, stamping, punching with system tool - Inert gas brazing - Welding TIG, MIG, MAG - Installation of all kinds of conductors with interior cleaning - Sandblasting of small parts - Processing of micro-volume series and batch sizes Turn - 7000 different bending parts - Over 500 different tools - Customize in Dimensions Ø 4 mm - Ø 90 mm - CNC - machines, mostly automatically - Processing of round, flat oval and profile tubes - Coupling to 3D - Metrology Transform - Formed in 2500 various -

AGRIKON ALFA Ltd. has been engaged in designing, manufacturing and distributing stainless steel and carbon steel equipments for customers all over the world for all kind of projects. Keeping in view outstanding quality. AGRIKON ALFA Ltd. wants to meet the requirements of the individual market and is also striving to meet the expectations of the customers completely.

Laser Cutting / Sheet Metal We are three laser cutting machines Trumpf available. Thus we have the opportunity, extremely flexible to process your orders and to respond to obvious delivery. Our processing spectrum is as follows: Metal foils with thicknesses well below one millimeter or sheet thicknesses up to 25 mm - TRUMPF Laser cut everything consistent with the known quality and reliability. The cut edges are burr-free, the kerf narrow and strictly limited the heat affected zone. Turning / milling / drilling In the field of machining we can build on the know-how of our qualified staff. These are supported by a total of 8 machines. Of the 4 of us are CNC lathes the company spinners, as well as 3 CNC machining centers for the production are available. Also available is a manual lathe that comes in small series in use. Edge From a simple sheet metal parts to complex curved precision part: the hydraulic CNC press brakes from TRUMPF anything get in shape.The brakes of the TrumaBend V230 stands for flexible and productive folding. For good-quality and efficient folds is developed by Trumpf angle sensor ACB (Automatically Controlled Bending). This bending angle sensor is responsible about measuring out for control of the angle to the desired setpoint. Developed by TRUMPF angle sensor ACB can do both: Measurement and control in the process. Elaborate startup phases of bending programs belong to the past. Every angle is right the first time. The change in the recoil angle by different materials and material properties governing the system independently and automatically. Whether embossed or air bending - the economic Customize precisely fitting parts with tight radii and small leg lengths is the strength of our Trumpf press brake V230: Welding / fixture Because of the many opportunities and special benefits MAG welding is used by us.To name a DC in the first place here is the extremely high productivity in MAG - welding. It also supports us a welding robot of the company IGM. This allows us in a very short time to produce large series of different modules. Since we want as quickly as possible and high quality finished welded assemblies for you, is us, a separate fixture available. Measurement In order to bring the highest quality standards to the customer, the field of measurement technology has been strengthened. The INFINITE arm is the most accurate and versatile articulated arm. Patented rotation axes without rotation limit, fast probe exchange, integrated digital camera, including wireless connectivity and battery power offer unlimited mobility. The main applications are the measurement of devices and welded assemblies. Stahl-Bürstmaschine/Blechbearbeitung "Innovation for sheet metal working" The double-sided Oxidschichtentfernung of lasered sheets in a single step to the risks orReduced costs in manufacturing. Assembly Our production is completed by the "ATTIS assembly line". These are high-quality agricultural machinery (bale wrapper) from Welger. This ensures a high impact strength, excellent and easy operation as well as a unique security feature. Foreign production / external processing For product realization are our highly specialized partner. This applies in the fields of painting, powder coating, galvanize, harden and turn tube.

ÖZ-İŞ Oto Yan Sanayii has been operating in the field of Automotive Sub-Industry since 1969 in its facilities in Düzce. Our company, which serves the automotive sector, uses the most common production methods of the age in order to minimize the number of faulty products by using quality control techniques at every stage of our production and to deliver on time by reducing our costs. Our company, which has a large machine park, meets customer demands in the best way with Cad-Cam and R&D studies.

Who we are Single - and series production of machines and vehicles, medical and dental equipment, hydraulics and pneumatics. After task of our customers from the machines and special machinery, medical and dental equipment, aerospace, environmental protection, packaging industry, the automotive industry and many others, we provide solutions and products with precision and quality. We design and build custom and machine parts of all kinds as individual productions or in series. According to the plans of our customers or, very often, with own designs. Because: When it comes to ideas, precision and quality, one comes to Hein + Gernhard. What we can Challenge us with your problems. We bring you the innovative, economical solutions. Tell us your problem send or fax us your specifications or drawings. You will receive an offer from us, and then we deliver the desired products with precision and quality. What we do Performance examples of micro-tube system to the plant. We manufacture tube and sheet metal parts from steel, stainless steel, brass, copper or aluminum. We sawing, deburring, drilling, turning, milling, bending, punching, edge, weld or solder. We use the technical know-how of our qualified staff and modern tube bending machines, punching, press brake, milling machines, which are all CNC controlled. This results in micro-tube systems for dental equipment, parts of dental chairs, pipes for transmission, cooling and lubrication systems, pressure and suction, exhaust pipes, heat exchangers, guard, guards, panels and profiles, housing, front, base and cover plates, as extraction devices for gas analysis probes, waste management and recycling systems and special machinery of all kinds to bagging machines for bulk materials. What we do Solid craftsmen who manufacture precision and quality parts with creative ideas.Our team solves customer problems creatively, innovatively and quickly in metal and machining. From a Locksmith emerged, today is the fourth generation at Hein + Gernhard in the wings. Specializes Hein + Gernhard as a supplier of well-known companies in the field of tube bending products and sheet metal processing. We provide timely delivery and reliable precision metal in the best tradition of craftsmanship. We use the latest technology and a powerful machine park with qualified, dedicated staff. Demonstrate the breadth of our products and the satisfaction of our customers: Hein + Gernhard provides creative solutions to complex problems. We are just the specialists for the extraordinary in the metal processing and machining.

Our company manufactures parts and / or Fully assembled cables with current state of the art sheet metal forming technologies in the optimal quality, on time and be inexpensive. We are flexible, so we can realize the customers' needs both technically and economically optimal in production. Our own factory with 17000 m2 of covered Area is right on the logistics cheaper Landstrasse Istanbul-EC.

Ingenieurbau Bismark (IBB) GmbH was founded in 1990 and is headquartered in 39629 Bismark. Ingenieurbau Bismark GmbH currently employs 38 people. The core area of the company is steel and plant engineering. The product profile covers the design, manufacture and assembly of complete steel buildings in system construction as well as special structures. Production takes place in a production hall with an area of 6,000 m². The core of modern production technology is a PCD 1100/1100 DG CNC drilling and sawing machine. This means that steel profiles up to a height of 1,100 mm and a length of 22 m can be processed automatically as far as possible. A computer-controlled NC drilling machine enables the automated production of flame parts from thick sheets up to 60 mm thick. For the production of industrial railings, ibb offers a modern CNC mandrel tube bending system with integrated rolling and ring bending equipment. 11 floor-controlled or radio-controlled bridge cranes enable effective handling of steel structures with a single piece weight of up to 15 t. A modern and powerful continuous blasting system with a throughput width of 1,500 mm and a newly built paint spray house with underfloor extraction with an area fund of 500 m² ensure the high-quality execution of paint coating work and anti-corrosion coatings. Since December 2000, the ibb has been certified in accordance with DIN EN ISO 9001:2000. Ingenieurbau Bismark GmbH has the manufacturer qualification for welding steel structures in accordance with DIN 18800-7:2002-09 for welding processes 111 Manual arc welding (E) 135 MAG welding (t MAG) 783 Ignition stud welding (DS) and has had the WPK certificate in accordance with DIN EN 1090-1 and the steel construction welding certificate DIN EN 1090-2/EXC3 since 2013. Ingenieurbau Bismark GmbH employs highly qualified and experienced architects and specialist engineers and is therefore able to plan complex construction projects and carry out qualified construction management.

As an owner-managed and medium-sized company, KOHLHAGE has been successful on the market for more than 90 years and can build on this wealth of experience. More than 180 well-trained and committed employees make KOHLHAGE one of the top addresses when it comes to finding solutions for demanding metal processing tasks. KOHLHAGE develops and produces: prototypes, pre-series models, small, large and very large series. KOHLHAGE is certified in accordance with IATF 16949:2016, ISO 9001:2015 and VDA 6. 2:2017 KOHLHAGE customers can be found in the automotive sector, mechanical engineering, the plastics industry and many other sectors in Germany, Europe and the rest of the world.

We are a pipe and wire processing company and vearbeiten stainless steel, steel, aluminum, brass, etc. according to drawings or samples. We are a welding company with manufacturer's qualification "B". We weld MIG / MAG and TIG by hand or with our robot, in addition we have a Hartlöterei. To our operating facilities include: - Various metal cutting saws as well as a Rohrsägeautomat concatenated with a Bürstenentgrater - Welding robot - 4 piece CNC bending machines, bending up to Ø 80 x 2.0 - Gewindeautmaten, male thread to M 52 internal thread to M 27 - Punching, drilling, shaping with various machines - Pipe End - Own fixture With our partners we are able to supply all surfaces in the area.

-

We are your strong partner when it comes to hydraulics, pneumatics and project planning! From planning and design to production and assembly of hydraulic and pneumatic systems and components: with us, you have a competent specialist at your side! For pipes and hoses, you've come to the right place. long-standing PARKER dealer We produce low-pressure, medium-pressure and high-pressure hose lines for you in our workshop. A large number of different fittings and fittings are available from stock, so that you can immediately take your assembled hose line with you. Benefit from our fast hose repair service with the Parker Tracking System™ (PTS). This enables us to ensure that all hose lines are permanently unmistakable and produce identical replacement lines within a very short period of time, so that the hoses no longer have to be removed before replacement. Your benefits are longer machine operating times and improved predictability of revisions, modifications or in the event of repairs. You will also never miss the due dates and intervals for replacement periods and intervals again (every 6 years for hose lines!) Our factory also manufactures pipes (special pipeline construction), as well as valve blocks and cylinders according to your specifications/drawings. Thanks to our broad manufacturing base, we can also produce spare parts for older machines and systems that are no longer available on the spare parts market. Regardless of whether it's a small quantity or a series: WE MAKE IT POSSIBLE!

The H. Steinhart metal goods factory GmbH & Co. KG represents the most modern type of production techniques in cutting metal machining. Founded in 1954 by Henry Steinhart as a factory for craft metal products it developed from 1979 becoming one of the most modern services and specialists in the fields of Sheet & Tube processing / wire bending technology / manufacturing of complete assemblies including surface Annual investment of considerable sums of money in the latest manufacturing technology, a work done in over 20 years of know-how, and a team of highly motivated specialists with the desire for perfection are the basics for a steady increase in the efficiency of H. Steinhart metal goods factory GmbH & Co. KG. The three pillars of our corporate philosophy High quality standard Punctuality Flexibility make our company a reliable and competent partner for a broad customer base.

The company PEGO GmbH in Winsen / Luhe for 40 years as a well established company in the development and manufacture of displays and shop systems. Within the PEGO Group, we have opened our extensive range of services with the "business metal" for industrial customers. We offer the complete service state of the art sheet metal and stainless steel processing, of the 3-D design to surface coating fast & flexible in-house. A comprehensive assembly production is part of our course of daily business. The combination of craft skills of our experienced staff, coupled with the latest CNC machine technology provides unparalleled, affordable quality. A Partnership relationship with our customers and suppliers is our top priority.

Franz Schürholz GmbH is an owner-managed family business in the third generation. In 1946 Franz Schürholz founded the company in Menden. Initially, household goods, kitchen appliances and agricultural supplies were produced. In the following decades, the company developed into an innovative partner in the cold rolled profiles and stamping products divisions. Today, our products are as diverse as our customers. Industries from A to Z rely on the quality of Schürholz: automotive, construction industry, fitting technology, electrical and filter technology, crane construction, shopfitting, lighting industry, mechanical engineering, furniture and office furniture industry, connection technology and other future industries. Continuous growth required the continuous expansion of production areas and the relocation from Menden to Wickede - the current location of the company. Here, 30 qualified employees using high-quality materials and the use of modern machinery guarantee the recognized quality of our products.

BERR Industry provides process equipment manufacturing and site services for commissioning. Our work includes design, as well as custom equipment for rehabilitation works or new processes. Also we have been manufacturing certain basic process equipment like coolers, heaters, filters, blowers, etc… For over 25 years, we have been serving a wide variety of industries ( especially for Oil&Gas Industry ) on projects that range from simple to complex. We strive to understand your operation to help us determine the best way to fix the problem, working within your time constraints. We also do a significant amount of machining of new products per the customer’s requests. Products that we have manufactured, include cooling tower, shell&tube exchangers, air and lube oil coolers, centrifugal pump housings, gear pump parts, screw pump parts, piston pumps, components from air conveying systems, heat recovery steam generators ( hrsg ), recuperators, silencers, filters, fogging systems, inconel shaft & fan, titanium parts and process equipment and frame-like weldments, just to name a few. Engineering Design & 3D Modelling Reverse Engineering & 3D Scanning Equipment for Cooling Systems Equipment for Heating Systems Reducing, Filtering and Metering Stations Chemical Storage Tanks General Process Equipments

We have been working in the steel and metal construction sector for 35 years and are based in Baden Württemberg. With a team of 25 employees and 2 trainees, we are proud to offer our customers professional and reliable work. Thanks to our extensive know-how and many years of experience, we are able to implement even the most demanding projects. Our team works closely with our customers to understand their needs and develop individual solutions. The satisfaction of our customers is our top priority. As a result, we have been a reliable partner for many of our customers for many years. We are also looking forward to helping you with your next project.

As a family business, Metalldesign Schmitt deals in the broadest sense with the treatment and processing of metals of all kinds. The focus of our work is the construction and assembly of stair and balcony railings through to larger steel structures for industrial applications. We are suppliers to both industrial and private clients, but thanks to our modern machinery we can also provide various contract work services for other metalworking companies. In addition, we are also specialists in the construction of clean rooms or special custom-made products according to customer specifications. Our company Metalldesign Schmitt was founded in 2010 and is based in the restored ensemble of the former Saarbrücken-Burbach railway repair shop, which has been prepared for all kinds of businesses. With few exceptions, the well-preserved buildings date from the time when the factory was founded (1857) and thus contribute to the unmistakable character of the location. Metalldesign Schmitt has found optimal possibilities here for its production and working conditions. We deal with all types of metal processing. We have modern machines and well-trained specialist staff at our disposal for this purpose. We are a registered welding company and fundamentally certified according to DIN EN ISO 9001:2008. Especially for the complex requirements in the field of welding technology, we are certified as a specialist welding company according to DIN EN ISO 3834-3. We also have certificates from various regulated areas.

Welding services in the areas of: -Pipeline construction -Steel construction -Plant engineering -Underground pipeline construction -Repairs -Hard orders (tanks) -Contract welding -Deposition welding -Assembly -Cut Manufacture of pipes and distributors The procedures -Wig (processes 141) -Mag (process 135) -Mig (process 131) -Cored wire process (136) -E-hand (process 111) materials -Steel -Stainless steel (CrNi) -Aluminum -Titanium -Cast