screw turned parts, cnc - turning, single spindel, multi spindle, escomatic, rotary table machines, assembly diameter 0.5-60 mm, in all materials

The Rudolf Kunkel Maschinenbau GmbH was founded in 1932 by the Master Locksmith Rudolf Kunkel. The company went from being an original Locksmith in a mechanical engineering, who worked as a supplier for material handling equipment industry in the first place. Were produced, among others bending and forming parts with welding processing, mechanical processing and surface treatment. For shaping and bending of many vendor parts self-designed and developed bending machines were used. These machines - evolved from practical - tried and tested in their use, so that one soon to passed to specialize exclusively on their production. In 1975 was the management of the holding, the 1976 GmbH was on Peter Kunkel over, held him until 1996. Since 1996, he is led by Dr. Michael Kunkel and Joachim Kunkel. Gen. Engineering Flame cutting, welding CNC milling, drilling up to 2000 x 800 x 600 Turning to center distance 3000 x 400 Bending of profiles and sheets, straightening Assembly Hydraulic Pneumatics Electrical Engineering / Electronics Components and assemblies Manufacturer of hydraulic straightening and bending machines and hydraulic presses and press automation. Special engineering in the field reel, straighteners, feeders, scissors. Special solutions in terms of complete production lines of metal forming

Committed to quality and connects! The Wachter AG is a company of the supplier industry, which constantly oriented to the needs of the market and offer customers pre-finished products or complete assemblies in line with the market quality. A motivated team works with modern machinery Parks for our international customers. High demands are challenges for us! As the oldest supplier company in the Principality of Liechtenstein, we produce over an area of about 000 m2 2 `in five production islands. Supports editing of a modern ERP MRP system, and we monitor customer orders as well as the entire production, in which the CNC - machines with a DNC are connected. Precise, just in time, ready to install! Our customers, which are mainly attributable to the industry, have their headquarters in Liechtenstein, the German-speaking Switzerland, Vorarlberg or in southern Germany.

TAMIDEC is a company of screw-machining with more than 30 years experiences. Our manufacturing capacity are from 0.9 to 65 mm Manufacturing on every types of materials as: stainless steel, bronze, brass, ceramic, plastic, hard steels, titanium, aluminum, alloy high temperature, superalloys, cast iron, composites, inconel, magnesium, etc. Specialist manufacturing of precious metals. Assembly by any processes of welding ( laser - tig mig - resistance - brazing). Of course, we could engrave en mark all your pieces by laser ISO 90011 - ISO 13485

Mechanical Engineering, Consulting and Sourcing. Il Faro helps the Customers in Sourcing of Mechanical Machining. Thanks to a consolidated experience and a network of suppliers, we optimize our Customers' purchases. We are committed to developing a Long Term Sustainable Business. "Costs optimization, Quality of the supply, Speed in answering, Management of the Emergencies" is our mix of competitive advantages in the Management of Each Order. The Quality management is integrated in all the business processes and quality must be guaranteed throughout the supply chain system.

We are the sales representative of Polish suppliers of CNC machining, welding and steel construction fabrication and plastic forming. Our suppliers produce single components and complex subassemblies as well, according to technical documentation. As one of the few on the market, we offer access to over 300 machines, on which all technological processes connected with steel processing can be performed – starting from high volume machining of turned parts on Swiss type lathes, throughout complex five-axis milling, ending up at big constructions which require plastic forming, welding and XXL machining. Processes are mainly performed on CNC machines. Services: Machining on swiss type lathes. CNC milling, five-axis CNC milling including, XXL milling on gantry type machines. CNC turning, long shafts and big dimensions including. Boring. Grinding of shafts and flat surfaces. Electrodischarge. Welding (MIG, MAG, TIG, Submerged arc welding). Laser cutting, waterjet cutting, plasma cutting, oxygen cutting. Plastic forming (bending, punching, stamping, pressing). Heat and surface treatment. Shot blasting, painting. Measuring and quality control. Assembly and assembly sets. HiIghlights: 18 SWISS TYPE-LATHES, UP TO 8 AXIS, from 1mm to 50mm 13 5+ AXIS CNC Milling machines Milling: up to 7000x5400 Turning: Fi max 10 meters, Lenght max: 20 meters Press brakes: up to 500 Tonnes

Richard Moser KG from Bubsheim is not just another manufacturer of turned parts from Heuberg. Our high-quality precision turned parts are valued and installed worldwide. Our customers come from a wide variety of industries and so we deliver technically sophisticated solutions for mechanical engineering, automotive, hydraulics and many other economic sectors. Moser stands for quality.

Our company offers advanced CNC machining already for 24 years. It is family-driven manufacturing company, that competes on mid to high volume single piece CNC turning and milling market. We have profound knowledge in producing non-ferrous metals. Our own skilled R&D sector and Tool shop produces excellent clamping devices that alongside with new machine park offer the best possible platform to produce even the most complex parts. Our team consists of 21 experts in CNC production and mechanics. Our revenue in 2019 was 1,8 millions €. We support mid to high volume production with: - Own automatization and robotization of the process, - Designing and producing special machinery for pre and post machining phases, - Achieving all of the quality control plans in accordance with customer wishes and expectations (CMM, outbound control department, quality control department, maintenance department, mechatronics department), - Designing and producing of clamping devices for hand, pneumatic and hydraulic clamping.

One - stop sourcing solution. Company located in Belgium with main activities cnc milling and cnc turning. Quotes in hours, Parts in days. Machining at it's finest.

From prototypes through to series production: We offer you full service from a single source. From machining and additive manufacturing to eroding and laser cutting, we promise outstanding quality and on-time delivery. With our premium machinery and many years of experience, we manufacture (almost) any component: - CNC turning: Sophisticated turned-milled parts in short and long turning incl. cylindrical grinding. - CNC milling: Efficient, fully automated production including wire and die-sinking EDM - 3D printing Polyjet: Up to 510,000 colors, countless material combinations and shore hardnesses - 3D printing Multi Jet Fusion: Efficient and cost-effective series production from PA 12 - 3D printing FDM: Carbon fibre reinforced for durable and resilient prototypes - Metal 3D printing: Excellent mechanical properties thanks to high strength and ductility - Welding: Certified quality standards for the railway industry (DIN EN ISO 3834-2, DIN EN 15085-2CL1), MIG, MAG, TIG, spot and stud welding - Folding: Complex sheet metal parts with high angular accuracy, 4 m bending length at 230 tonnes pressing force - Laser processing: 6 KW fibre laser up to 25 mm sheet thickness for steel, stainless steel, aluminium and up to 8 mm for brass and copper

Since 2006, Tekne s.r.l. has been supporting its customers from the prototyping phase to series production, in the production of precision mechanical components.

We would like to present ourselves as a long-time partner of the metal processing industry in the field of first installation and wholesale. Years of experience, quality certificates, motivated personnel provide superior service. Our production sales programme: # production and trade in standard and not strandard screw material and other mechanical elements (fe, 4,6-12,9, A2, A4, Cu, Al, MS); # Machining (CNC lathes and centers) # cold forging from M3 to M18 - to L300 mm # hot forging from M3 to M72 # Thermal treatment

We are a family-owned small business with over 35 years of experience. On 600 square meters, with eight employees, we currently produce turned and milled parts from all standard commercial materials for our customers. Our core competence lies in offering our customers from various industries, such as the automotive industry, automation technology and many more, an extended backhand. To satisfy our customers, we produce individual parts and smaller series of up to 1000 parts on the agreed date. All work processes are carried out by us, from the purchase of materials to delivery, everything from a single source.

Nordic Titanium is a manufacturing company with a factory located in industrial center of Narva, Estonia. Our products are manufactured from different grades of titanium, steel and plastic. To ensure quality of products we use only certified raw material. Our factory is specializing in manufacturing different categories of products, such as automotive, aerospace, marine, sporting, medical industry and other industrial types of products that always meet the needs of customer, technical specifications and quality requirements. With the flexibility of our manufacturing, the experience of our employees, and the constant investment into new technologies, we can offer our partners high-quality components at competitive prices. We are able to manufacture one-offs, low volume series and mass production items. The Nordic Titanium engineering and development team support the manufacturing process from the start of production and up to delivery to the customer including all enclosed documents, 3D models, technical drawings, assemblies etc.

STEFFENINI srl was founded in 1967 as a generic laboratory with the name of OMS Officina Meccanica Steffenini under the guidance of Francesco, the founding father, who is dedicated to the growth and development of the company. Francesco's son, Paolo, followed the same track drawn by his father. Thanks to his skills and dedication that he has always shown towards work, he embarks on a new path at the beginning of 2000 with the name of STEFFENINI VALVES by moving his activities to other markets such as petrochemical, energy and mechanical, developing his skills in production of industrial pumps, flanges and valve components by including design and production of own valves. At the end of 2018, their son Cristian is added to the company and together they decide to focus on what has always been our core business, the subcontracting, dividing the VALVE CONSTRUCTION and THIRD PARTY PROCESSING activities into two departments so the company name becomes STEFFENINI srl. The continuous efforts, the search for qualified personnel, the alternation of old structures with increasingly advanced machines, the passion that involves all the staff and the natural vocation that drives them to lavish all their energy, taste, pride in Seeing your company thrive, gain credit and inspire customer confidence is the company's mission. Specialized above all in the machining of valve components, they are skilled and equipped also for particular machining starting from ø 50 up to ø 2000