At our sites in Kornwestheim,and Mosbach we manufacture technical plastic injection molded parts both in large series with annual quantities of over 1 million pieces and small series with annual quantities of 1000 pieces. Efficient production lines always guarantee you the best price. The required injection molds are manufactured in our own mold shop or ordered from our network of German and Chinese mold makers. Metal parts to be overmolded are mostly purchased from our sister company located 30km away. Our customers therefore receive their plastic parts directly from one source. On modern plastic injection molding machines we produce plastic injection molded parts from all thermoplastic materials with a weight of less than one gram up to 3kg. As an injection molding specialist, we process almost all conceivable plastics for the production of technical plastic parts. A high degree of automation of our injection molding process allows us to produce molded parts in small, medium as well as large quantities within our injection molding shop. A large portion of the injection molding machines are equipped with robotic systems and material feed conveyors. Machinery: We use only high-quality ARBURG and DEMAG injection molding machines for the production of your plastic parts. In total, we have access to a capacity of more than 25 injection molding machines. Injection molded parts can be produced with a part weight of 0.1g to 3000g. Injection molding machines are available for this purpose at the Kornwestheim, and Mosbach locations with clamping forces of 20- to 1300-tons. Injection molding materials: We can process almost any plastic material ("molding compound") in our injection molding machines. All common raw materials, such as ABS, PA, PE, PP, PET, PMMA, PC, POM, PS, ASA, SAN, TPE (in various shore hardnesses) but also high-performance plastics such as PEEK, PVDF, PSU as well as bioplastics and WPC (wood-plastic compounds) with wood content of up to 70%. Of course, all individual colorings are possible as well as the equipment with various additives (UV resistance, antistatic, etc.), fillers (glass fiber or glass ball) and of course also in V0 equipment (fire protection and glow wire resistance). We are looking forward to your inquiry!

BC ITALIANA is a company with over 50 years of experience in both product engineering and plastic injection moulding of complex components. Currently the moulding department (4,800 square meters out of a total of 6,100 available) consists of 30 machines with 50 to 1,000 tons clamping force: this great difference of tonnage allows the moulding of micro components up to large or medium-sized parts. Furthermore, some plastic parts are produced by nitrogen moulding technique. This process can avoid functional, structural and aesthetic problems that sometimes arise with traditional moulding methods. BC ITALIANA manufactures, according to the highest quality standards, a wide range of products belonging to many industries: from automotive to rail, from medical to musical instruments. The main competitive advantages of BC ITALIANA are the long-time experience in engineering and moulding of complex plastic components, both from technical and aesthetic point of view. So, when it comes to dealing with customised and complex plastic parts BC ITALIANA performs at its best. Co-design, problem solving and extremely cared injection moulding are BC ITALIANA special services for all its clients.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

Expyou srl is specialized in the design of molds in the molding of plastic injection and blow molding items. We have an efficient mold construction department, we use aluminum and steel to meet the needs of the customer In addition to the Italian reality, we have a very competitive foreign production site for both molding and assembly. Our strengths are the punctuality and the quality of the supply,

We (Atabeta Makina) are a company specialized in inventing and delivering solutions for various engineering problems and manufacture different products all under one roof. We have CNC machines (CNC milling & CNC turning) drilling, tapping, welding etc machines in our machine park. As well as machining & welding jobs we work as Contract & Custom manufacturer, we also work surgical orthopaedic implants sector. Apart from that we service all kinds of plastic & sheet moldings. You can visit our website www.atabetamakina.com for more information. and we would like to support you according to your parts inqueries.

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.

Foundation 1967 in Barcelona. Verlan has been supplying thermoplastic parts all over the world for 50 years. We have two production plants, in Barcelona and Borges Blanques, with a production area around 15,000 square meters. Our fully automated production process and optimized structure allow us to offer a highly competitive price and a flexible and responsive service. Due to our fully automated system with a centralized feeding of raw materials and robots in each injection moulding machine, we are specialized in technical parts for medium and high volume. We have a dust-free space, technologically advanced hydraulic and electric injection moulding machines (with a clamping force up to 450 tonnes), that are and among the leading brands in the sector. We also have machines for overmoulding and two-component injection moulding machines. We work for the automotive sector, household appliances, electrical, electronics, transmission, and other precision products sectors for various industries. We have the following certificates: ISO 14001:2004 ISO TS 16949:2009

Italstock Srl's main skills consist in mould and product development support and manufacturing of technical and customized drawing parts in elastomeric materials. Our commitments flow into automotive, heating, hydraulic, pneumatic, household appliances and industrial fields, where we have been improving our know how since the eighties. The company has been active in this sector since the early 80s and is based in a highly industrialized area, characterized by significant tradition and experience in the production of industrial seals and in the rubber processing industry. The activity is supported by a distinctive entrepreneurial skill associated with competence, passion for one's work and continuous predisposition for improvement.

THE COMPANY Poliamid Plastics is a dynamically developing, Polish, family-run company operating since 1989 on the market of plastics. In the initial period of operating, the company only produced simple elements for the mining industry, and industrial fittings. Today, Poliamid Plastics is the company that offers several thousand of products. We specialize mainly in producing accessories for preinsulated pipes as well as plastic protections for many industries. We also carry out special projects for our customers, ranging from design to serial production. WHAT DO WE OFFER? The highest quality components, produced by our company are applied in various sectors of industry in the whole world: – plastic protections: caps and plugs for many sectors of the industry, – products for preinsulated pipes: centerrings, pipecaps and accessories, – special products: components made according to individual customers needs.

Founded in 1998, ARCARM S.R.L. is a manufacturer of technical rubber parts for various industries. The company is specialized on hydraulic rubber seals for the automotive and construction industry, but recently has expanded into almost every industry in need of rubber molded components. Certified rubber compounds (NR, NBR, EPDM, Silicone, FKM, CR, etc.) from different manufacturers are used in the parts production process. Being a member of IMDS since 2019, we value the quality of our products.

FESP MOLD SRL was founded in 1997 by Dario and Carlo Chiampesan who, after a decade of experience in the production of molds for jewelery, they founded FESP MOLD SRL exclusively for the production of molds for plastic products. We believe in the qualities of a family-run business, that is - COMMITMENT AND MAXIMUM DEDICATION TO THE COMPANY; - CONTINUITY OF KNOWLEDGE, PRIORITY IN PASSING THEIR EXPERIENCE WITHIN THE COMPANY; - RELIABILITY; - OPTIMAL RELATIONSHIP WITH COLLABORATORS WHO FEEL AN INTEGRAL PART OF THE COMPANY; - PERSONAL TOUCH IN RELATING TO CUSTOMERS AND THEIR NEEDS; - HONESTY AND INTEGRITY IN BUSINESS. Mold construction FESP MOLD SRL molds are made of tempered steel. They are characterized by the multi-cavity, the high production in the hot chamber, the use of nozzles and shutter systems or with sequential closure. Our products are distinguished by internal handling technology, trolleys, unscrewing and inclined rods. The steels, normalized and other components of the mold are purchased from the most important European companies and the molds are accompanied by certificates.

Production of plastic and composites parts, from initial idea until part delivery, focus on small series production, from 50 to 10000 parts per year, and using Reaction Injection Molding (RIM) technology. Working with Polyurethane and DCPD materials.

Jordan Spritzgusstechnik GmbH, part of the AluConcept Group, has been offering innovative solutions in the field of plastic injection molding and toolmaking for almost 55 years. With a wide range of services, from product-specific development and surface treatment to the assembly of complex components, we focus on the highest quality standards and comprehensive technical expertise.

Kinemation AG offers standardized and modular, industrial automation solutions for the manufacturing and distribution industry. We have the know-how and the knowledge to provide our customers with automation systems with which you can optimize your production lines to meet the need for high punctuality. In addition to the automation department, we offer contract manufacturing in the field of injection molding, stamping, mech. Manufacturing such as milling and assembly manufacturing. We are happy to advise you in detail on the subject of contract manufacturing in cooperation with Kinemation AG. Call us without obligation!

TERNPLAS was founded by Ergün Toprak, a native of Baden-Württemberg in Germany, and with his German industrial expertise in the automotive industry, he runs the production site in Ankara / Turkey with enthusiasm. TERNPLAS supports its customers with technical and manufacturing innovations. With unparalleled technological expertise in machining, mold construction and plastic injection molding, it is a proven supplier of high-quality and complex parts as well as development and service partnerships for customers in the automotive, medical, defense and general sectors. As a development and service partner, Ternplas accompanies its customers in the selection of design and materials and, through close, professional exchange, achieves the best solutions and cost-effectiveness. Ternplas produces worldwide for its customers with the most modern machines and systems with efficient, high quality and robust processes in series production. We make our important contribution to the continued success of our customers. Our customers appreciate and benefit from our lucrative services from development, series production to logistics with advantageous production costs in Turkey. "The key to our success is the success of our customers"

From the first concept to the customized assembly group, we are your reliable partner. Modern injection moulding machinery by Arburg, Krauss-Maffei, and Battenfeld let us produce sophisticated technical parts for customers all around the globe. Our special expertise includes 2-component injection moulding, insert moulding, and physical foaming. Various additional steps such as galvanizing, printing, and creating complete assembly groups complete our range of services.

The VolaPlast Group is one of the most modern and innovative plastics processing companies in Europe. For over 60 years, we have been manufacturing technical plastic parts at the highest level for the automotive industry, medical technology and other industries. Thanks to our locations in Spangenberg in northern Hesse and in Kyustendil, Bulgaria, we can offer you not only plastic parts but also complex assembly of components with an optimal cost structure. This allows us to offer you everything from manufacturing to assembly, welding, gluing, printing, packaging, transportation to organizing warehousing.

SOMEIL is specialized in zamak 5 (z410 / zinc alloy) high-pressure diecasting and electroplating treatment (nickel or chrome finishing) in-house. We have human and material resources to assist you from the Mold design/manufactoring to delivery of the final product. We are certified by ISO 9001 since year 2000. Currently, our Quality Management System is certified to ISO 9001:2015. Contact us for more information.

injection molding With our modern machinery, from stand-alone machines to complete production cells, we cover a wide range from initial sampling to small series production to mass production. In doing so, we deliver consistently high quality to you, regardless of which industry you come from. machines materials Assembly and finishing processes testimonials BackForward machines We currently manufacture on 11 injection molding machines with clamping forces of 28 to 160 tons. The machines are equipped with linear robots and appropriate peripherals to handle demanding parts. Small machines are equipped with sprue pickers, conveyors and programmable separating switches. Temperature control units up to 160°C are available to process high-performance materials such as LCP, PEEK and others. Special processes such as 2-component injection molding, inlay and overmolding technology are also part of our range of services. If required, we will be happy to send you a detailed list of our capacities! plastic insulator BackForward materials We process all common thermoplastics, from polyolefins, engineering plastics to high-temperature plastics and thermoplastic elastomers.