PLASTIC MANUFACTURING AND ELECTROMECHANICAL MACHINERY INDUSTRY AND TRADE

The company developing and manufacturing Eßbach was founded in Berthelsdorf 1999. Since April 2007, we relocated our headquarters to Brand-Erbisdorf. Here are covering an area of 750m ² various machining centers, design workstations and above average well-trained staff available with which we can also realize your tasks! Our high quality standards are certified by our certification to DIN ISO 9001. Examples of our products you can found in our website www.efe-essbach.de. Our main pillar is the development, production and distribution of heat sinks for power electronics. In addition to liquid cooling body systems based Unicool we also manufacture air-cooling systems of the body or combined devices after the system coldplate. Of course, we adjust the devices on your required specifications. Customers who use our products or benefits, include Siemens, Bosch, Baumuller, Bonfiglioli Vectron GmbH and Lust Antriebstechnik GmbH. In addition to the production of heat sinks, we operate a small special engineering. With this we are able to manufacture high quality facilities capable of over CAD design and CAD / CAM Interfaces. Thus, several different labeling systems to the standard product labeling including PDC connection were realized in our home. The investments are made entirely with control, and CNC-axes and delivered. Our customers can be found among others in the field of automotive and supply industry. Examples are: - Test benches for drive spindles with data acquisition - Labeling systems with freely programmable CNC axes 800x600x400 - Marking gear parts with interface to the PPS system - Devices for assembly and testing purposes - Molds for aluminum cast parts up to sizes of 800mm, including processing of castings when required - Special coolant systems for machine tools With our technology, we are able to realize customer-specific solutions, including the manufacture of parts and assemblies.Our machinery, we have expanded to operate and in particular the following machines: - 1 CNC machining centers with tool change 2000x800x800mm, internal cooling and swivel head - 1 CNC machining center 1000x500x400mm with tool changes and internal cooling - 1 CNC machining centers with tool change 500x400x400mm and NC rotary table - 1 universal CNC milling machine 800x400x400 (vertical and horizontal) - 1 CNC lathe, diameter 300mm long and 300 - Conventional turning up to 1000mm long - NC mandrel tube bending machine to D 26x2mm VA tube - Korundstrahlkabine for VA materials - Edelstahlbeizeinrichtung inside and outside - TIG welding workplace The CNC machines are connected to our CAD / CAM system and thus to work in a position to meet your or our drawings. Again, we have customers such as Heidelberger Druckmaschinen AG, Deckel Maho, Samputensili GmbH, Bharat Forge Aluminum GmbH & Co.KG or Licatec GmbH.

Plastics processing (injection molding, thermal molding, etc.) including printing (screen printing, offset, digital printing and metal construction

We present our company in the field of mold and tool making, founded in 1997 and restarted in 2012. We have many years of extensive experience, from planning and organization through construction to the manual and machine production of investment casting and injection molds. At the moment we have four employees - an increase in staff to seven to eight employees is planned for the future. Skrotzky Formenbau works with the latest CAD / CAM technology in conjunction with the latest CNC milling machines, which enables us to manufacture components with freeform surfaces and volume models of the highest complexity and difficulty. Future-oriented thinking and working is our goal. The company is therefore modernly equipped and technically up to date. Our machine park in toolmaking: MIKRON machining center 1000Pro MIKRON machining center 800Pro-X AGIETRON eroding machine  Maximum mold weight: 1.5 ton In addition, Mr. Patrick Skrotzky has owned a high-precision 3-D printer since 2018. This manufactures prototypes and series parts for the investment casting and automotive industries. In addition, we are planning to purchase a 3D coordination measuring device to create 3-D measurement protocols and direct 3-D target / actual comparisons. Our excellent know-how and many years of experience (40 years) in the investment casting area, as well as the modern equipment of our company, are the basis for constant quality at the highest level. This is also guaranteed for the future - Mr. Patrick Skrotzky will take over and continue to run the company.

We will help you to find the perfect injection mold for your product. We advise and help to optimize the part design for production and finally deliver your injection molding tool Freihaus.

The fascination for manufacturing and model making looks back on our more than 150 years of company tradition of the founding Misslbeck family from Ingolstadt. We have continuously adapted to the requirements of current markets and future industries. This long and successful family history looks back on pioneers and designers who still shape the company today.

Mould manufacturers for plastic injection (serveral industries served: Battery Complete Projects; Packaging; Household; Powertools; 2K+)

We are a dynamic company specialized in the production of technical articles in die-cast aluminum and zama, with medium-small productions and with a very high level of quality

IMR SpA is known as a leading supplier of high quality machines and services for the casting of copper based alloys. The extensive experience acquired world wide and research carried out since 1959 has lead to the development of Turn-key projects, ranging from the initial feasibility study, through to the supply of all machinery, design aspects, project management and personal training. IMR SpA and its staff are committed to satisfy its customers needs, by setting technological and quality standards, through its research and training centre and by meeting the ISO 9001 requirements. IMR SpA by working in various sectors of research, has developed gravity die casting machines, low pressure die casting machines, core blowers, furnaces, etc. to suit all needs. Within the IMR Group, MASPE, which is the machine tool division, can provide technology and solutions for the machining of components for the ferrous and non-ferrous industry.

In our foundry furnaces 12 sheds numerous aluminum alloys, depending on the desire and requirement to Kokillengussteilen of 5 g to 35 kg. On most modern casting machines we are able to manufacture 100 cm able parts up to 120 x 120 x. The production is designed from prototype to production greatest Series editions. Our foundry delivers your item at the request fully machined and finished ready to install as system components. The purchase of necessary additional parts or the disposition of provided materials is natural for us. Our machinery with Spectral analysis, CNC machining center, Trowal and ball polishing machines and measuring machines ensure you high-quality deliveries. With a changeover to Aluminiumkokillenguss customers could save money up to 75% of us.

The site of Gepforg is in Kóka, in Hungary, which is situated 40kms from Budapest. It was founded in 1990 with the participation of private ownership. The manager and also the owner is: Laczkó Ferenc. The history of our company run back over two decades. As a result of dynamic development, at present this medium-sized company uses an up-to-date CNC machine technology. Gepforg supplies different parts to a number of automobile factory and to their suppliers. We produce a wide range of parts (from air conditioner connector to electric motor houses). In 2003, Gepforg introduced the MSZ EN ISO 9001:2001 quality management system. The company is an accurate and a reliable partner because of the practise of the quality assurance according to the international standard and because of the direct contact with the partners. High-qualified, skilled workers provide that the level of both the products and shipping by Gepforg are internationally acknowledged. Our main activities: - CNC countersink ( turning, milling) - Tool design - Tool fabrication - Assembly of simple and complex parts - Aluminium moulding (chill and pressure moulding) - Winding

The main activity of our company is the production of injection molds. From design to manufacturing the first sample parts everything is planned by us, manufactured and tested. We also do any repair maintenance and modification work on the tools! Small series or individual unique pieces we produce just as well on request. * Construction & Development * Tool and Mold * Tool change * Repair work * Contract work * Turning and Milling * EDM * Sampling of Tools * Zero series of injection molded parts Production The main activity of our company is the production of injection molding tools. From design to manufacturing everything is planned, manufactured and tested by us. This can be from a simple on-off tool to tools with complex functions to be. So may be included in the tool, for example, mechanical or hydraulic slide, Schrägauswerfer, Ausschraubkerne or pneumatic movements. In the area of 2K Injection (2 components), we have collected a lot of experience in recent years. Such tools can we sampled on our 2-K machine and check for the desired function out so as to provide the complete finished injection molding tool. In the field of stamping, bending or deep drawing technology we have realized a number of projects for our clients in recent years. These are normal punching tools with a station to progressive tools with multiple stations. Scope of our tools made of parts: * In the automotive and motorcycle * Machine and jig construction * In sanitary facilities * In the construction industry * With household items * For measuring and testing instruments * In Sporting Goods * In the packaging industry * And in many other areas Service Nowadays, the variety of tool steels such as 1.2343, 1.2767, 1.2379, 1.2083, 12738, 1.2311, 1.2842, etc., and are welded aluminum, Erodierkupfer, copper alloys, various bronzes, Ampco alloys or stainless steel. Thanks to a long-standing collaboration with a partner company (which specializes in laser welding and laser cladding on), we can offer a repair service in this area. This can easily be done in no time and repairs received or changes to hardened inserts, cutting punches, matrices or other moldings or cutting elements. Contract work Whether small series or individual pieces, we will do a variety of work on our CNC machines. Materials such as plastic, aluminum, brass, Stainless steel and various steel grades we have in stock, or obtain them via our reliable suppliers within a very short time. Even smaller series of punching and bending parts are manufactured on customer request. Here is a short list of editing options in our company: * Rotate * Milling * Wire EDM * Die-sinking EDM * Hole EDM * Grinding * Punching

Technical plastic parts & mold making

As a member of the Caditec Group, one of Romania’s leading integrator of automation technology in industrial production processes, Hawema is the production site for and inhouse-supplier of Caditec Automation SRL for milled and drilled parts and assembly groups. We manufacture the parts and assembly groups for the production lines or fixtures designed by Caditec Automation or NUARB. We are the ones who make it happen. From mock-up to SOP! Beside our inhouse production we also offer premium quality to external customers, mainly global players but also to Romanian partners in the domestic market. We strongly believe in synergies and win-win-constellations and doing so we welcome any quality-commited partner to cooperate with us at creating better and better solutions for the one, global market.

Time, Quality & Cost TQC stands for the three core indicators of quality: adherence to deadlines (time), consistency of delivery and order (quality) and adherence to the budget (cost). Those who work for TQC have already learned their lessons elsewhere and know how to define, establish and optimize processes so that the above indicators hit the target corridors from year to year. Because that was exactly what drove our foundation and it still is today: We only offer what we have mastered and only sell what can be proven to be of benefit to our customers.

Grattec GmbH has been located in Boizenburg / Elbe for more than 15 years. We manufacture tools and accessories for the ceramics industry and technical ceramics. With our modern machinery of milling and grinding machines, we can also implement your project economically and qualitatively. With state-of-the-art machinery and experienced employees, we implement individual CNC customer requirements from many industries precisely, on time and at competitive prices. We guarantee the highest quality Made in Germany. We are equally at home machining high-alloy steels and classic steel. Please do not hesitate to contact us.

We produce elastomer parts up to a specificaion.