We look forward to welcoming you to our website. Niggemann Formenbau is an innovative company that has successfully established itself on the market in the toolmaking sector since 1936. From construction to the finished tool / product. We offer you a wide range of services related to die casting molds and mold construction for light metal casting. Our certified quality management system guarantees you the highest precision in all processes. Qualified, highly motivated employees as well as a modern machine park produce what is important: On-time quality. Small series You will receive your sample and small series parts with the technological properties of your choice from us in the shortest possible time! We manufacture both milled and turned parts for you quickly and flexibly in smaller quantities of up to 500 parts and from all materials. On our lathe we manufacture your desired product up to a turning diameter of max. 465 mm and a length of 1000 mm. Axial and radial machining is also possible through the use of powered tools. We offer milled parts up to 5-sided machining.

Spinko is the company specialized in aluminium HPDC proces, machining aluminium HPDC and gravity castings, machining of iron, steel and stainless steel parts. We do also preassembly processes, leakage tests and parts marking.

Your professional partner for high-quality gravity casting. From the cast blank to finished heat-treated and machined precision part, from a single source. Take advantage of the expertise and experience in the construction giessgerechter castings. For your special needs, we may have just the right solution. Try us, we look forward to your response.

Producer of aluminium window and door furniture.

h1> Business /h1> We are a development partner and manufacturer of cast products of light metal for the automobile industry. The economic strength of our company is to be the basis for expanding our market presence and to enhance our Innovation and competitiveness. As a growing international group of companies, we strive for the highest Customer satisfaction through value-oriented service and partnership with our customers and supplier partners. Our company-wide quality-lived, environmental and work-safety-oriented Management System strongly supports the fulfillment of our corporate responsibilities. Raw materials, energy and water we use to conserve resources sparingly. We continually improve the environmental impact of our production processes and workflows with the aim to reduce the waste and emissions. Each employee ensures the Compliance with applicable legal obligations for our company. Motivated and qualified employees are the foundation of our success and the driving force for continuous improvement of our processes. Information and training are prerequisites for economic and quality-and environment-conscious thinking and action. In our society, social and environmental responsibility, we are righteous, we have a world of work create, to which our employees can be proud of and that allowed them to personal development.

We are specialist in the field of production of small and large series of core-intensive and heavy-duty castings. We have a modern electric smelting plant with a 4-ton medium frequency and two 10 ton power frequency induction furnace, which will guarantee us a total capacity of approximately 15,000 tons per year. The products are in the mass range of 100-15.000 kg unit weight in the material qualities: EN-GJL-200 EN-GJL-250 EN-GJL-300 alloy cast iron (Ni, Cr) for heat resisting castings and nodular cast iron of the qualities EN-GJS-350-22LT EN-GJS-400-18LT EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 Our main clients are from the fields of wind power generation, motor, machine tool industry, gear manufacturing, pump and Verdichtungsbau, turbine construction and general engineering.

In more than 50 years came from a small family, a modern company. Our work is based on the latest technology in production, a customer-oriented organization and expertise in all areas of Al and Zn die-casting, as well as the Al-Kokillengusses. Customer satisfaction, short distances, quality, experience, flexibility, environmental awareness and innovation. This will make us a lot of customers to a major supplier for castings of aluminum and zinc. We help you in achieving your claims in the shortest possible time and in top quality. We have specialized in casting products in small and medium series. We assume not only casting production, but also the mechanical machining, surface treatment, assembly and logistics of pre-finished parts. A high degree of punctuality in through a personal contact person is the foundation of a successful partnership for us.

Our group unites aluminium casting, machining, assembly and component testing under one roof. Situated in the heart of Europe, HAL supplies clients worldwide and is well prepared to serve any industry or application. We produce for the industries engineering marine, motor production, energy sector as well as vehicles and automotive engineering. Engineering - Aluminium Casting - Machining - Assembling - Testing - Quality

Aluminum castings, molds and Werkzuegbau, mechanical processing and heat treatment.

Are the pronounced dynamics and flexibility of a medium-sized structure in combination with the advantages of an internationally established production CF Maier the opportunity to develop highly sophisticated products of consistently high quality and inexpensive to manufacture. CF Maier light casting GmbH & Co KG The plant produces aluminum castings high levels in medium batch sizes than sand casting, gravity die and low pressure die castings-. Main customer base is the drive technology. Light metal flared flanges for water, waste water management and the paper industry as a round-house products off the program. The light cast is zertzifiziert according to DIN EN ISO 9001.2 and VDA 6

ince more than 40 years your competent partner for light and heavy metal castings in sand and permanent mold.

Develop since 1921, we produce and distribute at the site Holy House under the brand name DENI locks and fittings for gates, doors and windows, individual lock solutions as well as stamped and cast parts in contract manufacturing of Trade and Industry. A motivated workforce, modern machinery and a flexible ERP - system guarantee optimum quality at fair prices. Of course, our quality system is in accordance with DIN EN ISO 9001:2008 certified.

Year of establishment: 1954 Delivery: 129 425 t Sales: EUR 289 million Export: 86% Sales / Employees: 293,000 EUR Owner: ELES 80% (ELES is the Slovenian state-owned electricity producer) Employees: 988

ALUMETALL CZ s.r.o. - Aluminium Alloy Casting Foundry - ISO 9001: 2008 and ISO 14001: 2004 certified company. Customers highly appreciate: 1. Ensuring of complete technical development and 3D computer product designing in cooperation with the customer. 2. The construction and manufacture of foundry tools, its maintenance using non-abrasive dry ice blasting. This kind of blasting does not harm the shapes and surfaces of moulds thus considerably extending their service life. 3. Excellent products quality. 4. Short delivery times. 5. Helpfulness and speed communication. Production programme: components of hydraulic pumps, fittings, the high voltage transmission systems, pneumatic tools, engines, looms, fire extinguishers and other products in accordance with customer requirements. General parametres of the castings: weight 0.1 up to 30 kg/pc, minimum wall thickness from 4 mm. Material: Aluminium alloys according to standard EN 1706: AlSi12, AlSi12Cu, AlSi10MgMn, AlSi10CuMn, AlSi9Cu3, AlSi7Mg0.3 and the other. Production Technology: 1. Gravity casting into steel moulds. 2. Low pressure casting into steel moulds. 3. Sand casting. Production of prototypes, small and medium-sized series. If needed there are used sand cores in above mentioned technologies. Additional manufacturing processes: 1. Heat treatment - T6 2. Shot blasting 3. CNC machining 4. Wet and powder coating 5. Anodizing 6. Galvanizing 7. Assemble of the final product On-site equipment for quality control of castings: 1. Stationary X-ray unit PHILIPS for non-destructive testing internal quality of castings and completeness assembled assemblies. Commonly used in the sampling and mass production castings. 2. Spectral analyser SPECTROMAXx - chemical composition of supplied castings 3. Hardness tester (HB). 4. VIC Helium leak detector MS50 - Leakage test products against the flow of helium vacuum, according to EN 1779: 1999. The test is used for qualitatively very demanding castings. Element helium as control medium due to its very small-sized molecules guarantees 100% confidence compared to tests using air. Destructive and dimensional tests are provided in cooperation with accredited laboratories. Experts at Turning Your Dreams into Reality

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

GÜRGENLİ Mühendislik Ltd started its activities in Bursa in 2000 in order to serve in the heavy industry sector. It aims to produce quality with the knowledge of the trained personnel with many years of experience in the sector. We are a company that has adopted the principle of working without compromising customer-oriented social responsibility and ethical values within the sectors we operate. GÜRGENLİ Engineering Ltd carries out design, manufacturing and assembly projects with its skilled engineer staff in the heavy industry sector.

SA.BI Foundry, founded in 1968, has undergone various phases of development throughout the years and has become a leading company in the field of the production of grey and spheroidal cast-iron castings also with additional machining. The current production capacity is 30,000 tons of ductile and grey melted cast iron. The flexibility of its production and logistic structure allows SA.BI to be competitive in the production of cast-iron castings of a weight between 4 and 700 kg in medium and large series. The company, certified ISO 9001:2008, has a quality control system in each production cycle, starting with the selection of incoming materials and going through up to the despatch of the machined castings.

The Italian COMPANY Musto et Bureau Srl is known worldwide as one of the main suppliers of mechanically welded steel crucibles for casting magnesium, zinc and non-ferrous alloys. Its customized products are known throughout the world with the brand name DITTA MUSTO. As a leader in the magnesium and zinc fields, our production enjoys an excellent reputation for its high specialization and competitive costs. Over the last 10 years, Musto et Bureau Srl has developed a continuous improvement in production processes in order to raise the level of quality and durability over time. Musto et Bureau Srl tries to apply all new technologies in production and inform customers on new materials. Musto et Bureau Srl works to support customers in all their needs and collaborates with them to achieve a position of world leadership.

“Dniprovsky special tools plant” LLC the largest company in the CIS specializing in the production of metal cutting tools (tool holders for turning and grooving, tool blocks, blades, mill bodies, drill bodies and atc) and accessories for enterprises in the metallurgical and pipe industries. For many years, our factory has provided factories in Ukraine, Russia, Belarus, Poland and Germany with standard and special metal cutting tools of European quality. The average staff count of the company is 150 people.