Sternberg hardware is specialized for decades in the production of aluminum castings. In each case we use the optimum alloy in cabin quality. To our range includes: * Fittings for buses and trains * Karrosseri * Plastic coatings * Custom * Die casting, gravity die casting and sand casting * Parts of 10 g to 10 kg What our customers appreciate ... Experience Our experience in the field of aluminum casting will benefit our customers not only in large-and small series. Even complicated parts put us in the past are not unsolvable problems. Quality The quality of our products is appreciated by many renowned manufacturers of vehicle construction. You deserve our special attention, which is why we have been certified since 1994 according to the ISO 9002 standard. Reliability Time delivery and fast delivery - once it "burns" for our customers - have led to partnerships that exist in some cases for decades. Responsiveness Since we each work step in-house to perform on most of our products, we are flexible and have short lead times.

The company ZAL Zlievaren Al GmbH was founded on 03.11.1993 and registered on 28.01.1994 in the commercial register. The casting of Al alloys is in the premises of the company since 1963 tradition. The company is mainly oriented to foreign business customers whose production volume is between 60-70% a year.

We are a dynamic company specialising in the production of die-cast aluminium and zinc-aluminium alloy technical articles, with medium-small piece sizes and a veryhigh qualitylevel. We have been working in the furniture and lighting fittings sector for more than a decade. Our aim is to give you a TOP-QUALITY COMPLETE SERVICE at a competitive price, with total guarantees from design to the finished product, throughout all processing stages. We assure you: TECHNICAL EXPERTISE QUALITY QUICK TIMES COMPETITIVE PRICES In particular, we are "masters" in the die-casting of aluminium and zinc-aluminium, and in the casting of aluminium, years of experience in the sector have given us specialist expertise recognised by many designer names, in the furniture and lighting fitting sectors above all. CONSULTING: MOULDS: Design and production of moulds for die-casting aluminium casting aluminium PROTOTYPES: DIE-CASTING: MACHINING: Drilling, thread-cutting, milling-cutting, etc. TUMBLING, GRINDING, CLEANING, SATIN-FINISHING: GALVANIC FINISHES: PAINTING: ASSEMBLY: QUALITY CONTROL:

We specialized in aluminum Kippgießteile their specialized piece weights in the range of approximately 10 g are up to 100 kg. The large volume Kippgießteile with dimensions up to 1.5 m in length are manufactured in Germany. The wage-intensive products are manufactured at competitive prices in our new plant in Hungary. A variety of products we supply finished in all common remelting and hut alloys. For years we have been supplying reputable clients in the areas of the vehicle, drive line, machine and plant construction. Likewise, we manufacture manufacturer of electric motors, awnings, exterior lighting and industrial scales. This is mostly to various gear housing or drive housing and motor flanges, cover and cylinder with high technical requirements. The unit weights of these products are in the range of about 1 to 100 empty kg, we have specialized in large-volume Kippgießteile. A variety of products we supply finished in all common remelting and metallurgical alloys.Cast parts are eg. Base frame, housing, brackets, base, magnetic enclosure, equipment rack. Our special services: 1 Construction services as early coordination with our partners to achieve a technically and economically favorable solution for the casting and the casting die. 2 Foundry Technical consulting for the development of new castings on initial samples to mass production. Advising on necessary technical changes to the article. 3 Electronic monitoring and control of casting machines to ensure that our clients want quality. 4 Delivery of castings and heat treated if necessary and machined Aluminum alloys The melt is continuously monitored with existing spectrum analyzer (Spectrometer). Molded be the most common alloys, both in remelting and in cabin quality. The following alloys are in use in our: Alloy designation to DIN EN 1706 numerically chemical symbols EN AC-21100 - EN AC-Al Cu4Ti EN AC-42100 - EN AC-Al Si7Mg0, 3 EN AC-43300 - EN AC-Al Si9Mg EN AC-44000 - EN AC-Al Si11 EN AC-44200 - EN AC-Al Si12 EN AC-46200 - EN AC-AlSi8Cu3 EN AC-47000 - EN AC-Al Si12 (Cu)

Scope of work: - gravity die casting 1000x800 - Low-pressure casting kokillengröße 1140x914 - Kokillenbau in the house - Hot swap Materials Processing: AL alloys according to DIN EN 1706

Huisman non ferro metaal produces very different castings for a variety of clients. It is cast in chill casting and low-pressure casting. In this case, we have a high degree of uniformity and high quality. We produce parts in batch size from 500 to 10,000 per year, with a weight of 50 g to 10 kg. Machining applications and heat treatments to achieve better mechanical properties of the castings also include range of HNF. HNF is certified according to ISO 9001:2000 and PED 97/23/EC directive even after so the quality is guaranteed by pressure-resistant parts.

Pressure casting of non-ferrous metals, alloys Zinc (Zamak) and lead Main sectors: building 70% cosmetics, nuclear Integrated machining work Lead Specialist in Zamak and pressure die casting products from 0.1g up to 1Your Main sectors: housing at 70% and nuclear industries Cosmetics products Integrated machining

Our company is positioned as a delivery partner of small and medium series for cast aluminum products. The gravity die casting offers in lot sizes from 500 pieces, high strengths and high material density. However, seek a technically and economically optimal solution, so we offer the die casting process. It allows small wall thicknesses, weight and material savings, smallest tolerances and continuous production processes, with lot sizes from approximately 3,000 pieces. Through our own CNC machining the finished aluminum castings are order-specific processed and coated as desired. Our design department advises our customers on casting issues and coordinates the preparation of the printing and Kokillengusswerkzeuge with our own tool or the suppliers. Our quality management system complies with the requirements of the standard DIN EN ISO 9001 and is regularly updated through internal and external audits.

With Connfix GmbH as a system supplier, your processes are optimized and cost savings achieved. Together with our network partners, we produce customer-specific drawing and special parts in the field of turning technology, casting technology, stamping and bending technology as well as assembled rubber and corrugated metal hoses, which are produced in our factory. We accept the most varied of requirements and support you from the development of the prototype to series production. Our customers already include well-known OEM manufacturers (automotive, plant, machine and shipbuilding) References can be sent on request.

We are a family owned light alloy diecasting foundry founded in 1974, which works in the ISO 9001: 2015 and IATF 16949: 2016 certified quality management system. The company has 2 melting furnaces and 11 die casting machine, from 400 to 1100 tons, all fully automated, and is able to do all the necessary processes to provide the customer with finished parts ready to be used in production adding all kind of machining, leakage controls, 3D tomography, painting, and many others. We have a long experience in the die casting of for chairs, and we collaborate with the major Italian manufacturers. In addition, recently, to ensure a complete service to the customer, it acquired the company Svea Stampi, which specializes in the construction of highly complex molds for plastics and aluminum die casting with an ISO 9001: 2015 certified quality management system. With its experience of over 35 years, Svea Stampi can offer you multiple services, including the choice of the most suitable materials for the specific product, choice and study of the type of feeding through the simulation of filling, solutions for the simplification of the mold, molds for prototypes, dimensional surveys, as well as after-sales assistance and modification interventions. We design molds with dimensions up to 1450 x 1200 mm for presses with clamping forces up to 1500 tons.