Modern and future-oriented The traditional company Hiby Since the middle of the century 19.ten we set standards in terms of quality and durability. With the will to innovate and the steady response to new markets, we are also now one of the sought-after and well-known companies. With continuous expansion of its core businesses, we act as Hiby group in fusion with the ELAFLEX as an ultra-modern manufacturing company in the field of SAND CASTING for aluminum castings, gunmetal and Pipe Fittings, as well as for the installation of assembly modules on national and international markets. We are characterized by a high degree of vertical integration, including machining and assembly. Our customers come from all areas of the vehicle, machine and plant construction, from the electrical, installation and environmental engineering. All tools are designed and manufactured in our own tool model and fixture. This resource and our know-how we offer as a service.

Are the pronounced dynamics and flexibility of a medium-sized structure in combination with the advantages of an internationally established production CF Maier the opportunity to develop highly sophisticated products of consistently high quality and inexpensive to manufacture. CF Maier light casting GmbH & Co KG The plant produces aluminum castings high levels in medium batch sizes than sand casting, gravity die and low pressure die castings-. Main customer base is the drive technology. Light metal flared flanges for water, waste water management and the paper industry as a round-house products off the program. The light cast is zertzifiziert according to DIN EN ISO 9001.2 and VDA 6

Main activities and products: Waeles Nederland BV is a QS9000 certified iron foundry, specialised in nodular cast iron products. This certification signifies that we comply with one of the most significant standards laid down by the automotive industry. Waeles offers a wide range of parts for various industries, including automotive, agriculture and mechanical engineering. When it comes to quantities as well as design, we are able to meet all your specific requirements. Net weight of our products ranges from 0.5 to 7 kgs. Production process and technology: In order to melt nodular cast iron Waeles operates 4 induction furnaces, each having a capacity of approx. 3.5 tonnes. The core of our production is the DISA-Matic MK4 casting machine. This is a fully-automatic vertical casting machine that meets the requirements of high casting speed and great accuracy, thus enabling us to meet the customers requirements. Series from a few thousand units up to an annual volume of approx. 400,000 are possible either in form of raw castings or as completely finished products. After casting the products are cooled down in the AMC cooling section, a process that takes an average of 30 minutes. Next the castings arrive in a (cooling) drum which separates the moulding sand from the product.

The aim of our company is to produce the optimum casting in cooperation with our customers for any application. This includes individual advice in the development, and the design and manufacture of your casting by our qualified team. Our nearly 125-year-old foundry experience, know-how and modern production guarantee a perfect product. In order to achieve an optimal, economical and technical casting design, should already incorporate our expertise in the design. In cooperation with the customer may be so indicated by a casting-workpiece optimization and cost-effective design. Therefore benefit from our experience and take time, our advisory services!

Company History Our firm which was set up 1976 as a machining workshop in Eskişehir Industrial area today owns a plot of 7200 m2 is covered in Eskişehir organised Industrial area. Since 1996 our company produces machined products made of pig, sphero and wrounght material and i n the same year our company became an ‘ Incorporated Commercial Company’. Our firm which has served to many automative firm so far has a lathe and machinery park and iron foundry of considerable importance. Products of our company are controlled in our own Quality Control Lab. With assistance of COORD3 3-D CNC technology, comptrollers masters etc. KIVANÇ MAKİNA sells its products to many companies both domestic and abroad.

Our Company – EUROCAST Košice s.r.o. is oriented to the metallurgical production of castings made of grey, ductile and steel irons with high quality requirements of a final production.

Casting materials: Cast iron with lamellar graphite Cast iron with spheroidal graphite in all classes Main products: Medium and large series Unit weights from 0.5 to 600 kg coreless and core intensive

• Pump Manufacturer • Transmission and valves manufacturer • Metrology • Medical equipment • Injection Molding • Special machine • Sawing Technology

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

ALUMETALL CZ s.r.o. - Aluminium Alloy Casting Foundry - ISO 9001: 2008 and ISO 14001: 2004 certified company. Customers highly appreciate: 1. Ensuring of complete technical development and 3D computer product designing in cooperation with the customer. 2. The construction and manufacture of foundry tools, its maintenance using non-abrasive dry ice blasting. This kind of blasting does not harm the shapes and surfaces of moulds thus considerably extending their service life. 3. Excellent products quality. 4. Short delivery times. 5. Helpfulness and speed communication. Production programme: components of hydraulic pumps, fittings, the high voltage transmission systems, pneumatic tools, engines, looms, fire extinguishers and other products in accordance with customer requirements. General parametres of the castings: weight 0.1 up to 30 kg/pc, minimum wall thickness from 4 mm. Material: Aluminium alloys according to standard EN 1706: AlSi12, AlSi12Cu, AlSi10MgMn, AlSi10CuMn, AlSi9Cu3, AlSi7Mg0.3 and the other. Production Technology: 1. Gravity casting into steel moulds. 2. Low pressure casting into steel moulds. 3. Sand casting. Production of prototypes, small and medium-sized series. If needed there are used sand cores in above mentioned technologies. Additional manufacturing processes: 1. Heat treatment - T6 2. Shot blasting 3. CNC machining 4. Wet and powder coating 5. Anodizing 6. Galvanizing 7. Assemble of the final product On-site equipment for quality control of castings: 1. Stationary X-ray unit PHILIPS for non-destructive testing internal quality of castings and completeness assembled assemblies. Commonly used in the sampling and mass production castings. 2. Spectral analyser SPECTROMAXx - chemical composition of supplied castings 3. Hardness tester (HB). 4. VIC Helium leak detector MS50 - Leakage test products against the flow of helium vacuum, according to EN 1779: 1999. The test is used for qualitatively very demanding castings. Element helium as control medium due to its very small-sized molecules guarantees 100% confidence compared to tests using air. Destructive and dimensional tests are provided in cooperation with accredited laboratories. Experts at Turning Your Dreams into Reality

Zlieváreň SEZ Krompachy is private joint stock company over 20 years (previous state factory SEZ Krompachy) and we produce grey cast iron castings according to EN-GJL-150, EN-GJL-200 and EN-GJL-250 on DISAMATIC 2013 moulding machine with maximal dimensions of castings 450 x 350 x 150 mm, weight up to 20 kg / piece and series over 5.000 pieces / year. Capacity of our foundry is 10.000 Tons / year and we still have some free capacity (cca 2.000 Tons / year). More than 90 % of the whole production is being exported to the European markets (A, I, D, FIN, CH, S, B, F, CZ, H). Our company is employing cca 105 workers and we are owners of certificates ISO 9001:2009 and ISO 14001:2005. The assortment of produced castings consists of castings for automotive industry, cooling industry, electrical industry, hydraulic transmissions and pumps, white engineering, oven, fireplaces and other heating bodies, drainage systems, other industrial machines and equipments. If you send us necessary information (drawings, amounts and weight of castings), we would prepare price offer in short time.

Cast Iron is a modern producer of cast iron. Cast Iron casts in chemically bonded sand (furan). Cast Iron supplies the industry with high quality pieces from 1 to 6000 kg. Cast Iron specializes in small batches between 1 and 1,000. Cast Iron is a customer-friendly company with short delivery time. Expertise, flexibility and customer satisfaction are the main pillars behind the success of Cast Iron. Cast Iron supplies all qualities of cast iron: lamellar nodular hardwearing extremely durable heat proof fire and acid resistant alloyed

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

GÜRGENLİ Mühendislik Ltd started its activities in Bursa in 2000 in order to serve in the heavy industry sector. It aims to produce quality with the knowledge of the trained personnel with many years of experience in the sector. We are a company that has adopted the principle of working without compromising customer-oriented social responsibility and ethical values within the sectors we operate. GÜRGENLİ Engineering Ltd carries out design, manufacturing and assembly projects with its skilled engineer staff in the heavy industry sector.