Small company working with exceptional quality and attention to detail.

We are a metal working company. Our production is in Poland. We can laser cutting, sawing, punching, drilling, welding and welding Powder coating. Hot dip galvanizing and plating are also possible.

Company Kontmet Ltd. was founded in Gulbene, Latvia in 2012. Our main field of business is metal manufacturing - the production of standard and bespoke steel and stainless steel constructions.  We also offer a variety of surface treatments and products that come complete with the necessary mounting hardware and components made of other materials.

As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

The Schulz Conveyor Systems GmbH with its seat in Gräfenroda was founded by Mr. Peter Schulz 1991st Immediately after the foundation began to invest in the latest technologies. Aided by the laser cutting technology, which had its technical breakthrough early 90s, the clientele, and thus the company grew rapidly. Within just a few years on the former site of an old glass factory an advanced sheet metal manufacturing. After the laser technology also held technologies such as the folding and welding feed. In 1997, Schulz conveyor systems GmbH took over part of the Gothaer Fahrzeugwerke. Thus opened up for the company, a new line of business - the automotive industry. Today the company Schulz conveyor systems GmbH is a solid medium-sized company, which adapts through a flexible, broad-based manufacturing processes and the rising and volatile market conditions and requirements.She specializes in the manufacture of welding and assembly, as well as laser and metal parts. To continue in the future success of the company in the usual manner, the following business objectives: Ausbau and consolidation of market position Fertigung highest technical level Lieferung best quality Automatisierung manufacturing Erhöhung of technical, professional expertise to assist customers with constructive issues and cost reduction Erhöhung production depth

The company Edel & Stahl GbR is a medium-sized metal company specializing in steel, stainless steel and aluminum processing in the following trades. • Metal • Steel construction • plant • Mechanical engineering • Vehicle construction • individual structures of steel, stainless steel and aluminum Our Master and welding workshop is certified according to DIN EN ISO 9001: 2008, DIN EN 1090 EXC 2 and DIN EN ISO 3834-3

Carpentry specialized in sheet metal processing for third parties. Thanks to the solid experience in the sector and the continuous technological updating, it is able to supply products on drawings or models supplied by customers, with particular attention to the choice of materials up to the finishing treatments. A qualified assistance to customers in the process of developing their own products, prototypes and production, makes it collaboration is precious.

GEOTOM SIGTECH  is a Romanian company which is manufacturing welded and machined mechanical parts and sub-assemblies for French and Swiss companies.

The purpose of Kayaden Makina is; to contribute to the progress and development of the Machinery Manufacturing Sector together with other sub-sectors, to play an active role in the formation of all sectoral policies and applications related to the Machinery Industry, to strengthen the Sector in global competition by developing together with the sub-industry, to create an attitude open to solidarity and cooperation with the broad and democratic participation of sectoral organizations and a method approach targeting sectoral integration; It serves the Iron and Steel, Automotive, Glass Industry and Food sectors with its cutting-edge CNC Processing Center and Lathes and Universal Group Machines in Machining and Steel Construction processes in a 2000 m2 closed area with 35 employees.

We are a reliable partner for quality and precision metal fabrication and metalworking at competitive prices. Thanks to our strategic location in the heart of Europe, the many years of experience of our team and modern technology, we provide a wide range of services from design through production to on-time delivery.

We specialize in high-precision laser welding and the production of semi-finished metal components. Our advanced laser technology ensures exceptional accuracy and strength in every weld, meeting the rigorous demands of industrial applications. We work closely with manufacturers, providing custom welding solutions for series production and small-batch orders. From automotive to aerospace, our flexible services support a range of industries looking to optimize production with quality welding and assembly solutions. Our commitment to efficiency and excellence ensures that your components are delivered on time, up to spec, and ready for further processing. Partner with us to streamline your production process and achieve outstanding results with every project.

We are one of the largest companies in Lithuania offering a wide range of metal processing services under one roof. We provide comprehensive metal processing services, from cutting to painting.

SCHWEISSWERK URI GmbH was founded in 2019 and focuses on welding technology as a service provider for contract welding and as a manufacturer of apparatus and metal construction products. With passion for welding technology, the best quality is offered at economical prices.

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

B&S Schweisstechnik GmbH Teaching path 4 73529 Schwäbisch Gmünd

Our core competence is laser welding of provided parts. With the laser, very slim welds with a large depth-to-width ratio can be achieved. Due to the high processing speed, the thermal load is low and the distortion is minimal. Contactless welding makes it possible to process complicated seam geometries and hard-to-reach areas within the workpiece. As a rule, the welding joint is fused from proprietary material. If required, an additional material can be added via a wire feeder. With the laser, a wide range of materials can be welded without oxide (steel, stainless steel, cast iron, aluminum, cast aluminum, titanium, Hastelloy, Inconel,...)

Precision from Remscheid — custom metalworking Welcome to alexandersolia GmbH — Voss Metallbearbeitung, your reliable partner for precise CNC manufacturing and metal processing according to drawings. Whether turned and milled parts, bent parts, welding or complete assemblies — we implement your requirements exactly according to your specifications. We produce exactly according to your drawings — reliably, flexibly and with high quality standards. Diversity of materials meets manufacturing quality:From individual pieces to series, we process components made of unalloyed and alloyed steel, stainless steels, non-ferrous metals and various plastics. On request, we can provide material certificates, test reports and test reports for every product — transparent and comprehensible. Everything from a single source:From processing to finishing to packaging — we take care of every step of the process. On request, you will receive your components labelled, barcoded and ready to ship according to your specifications. What makes us special?alexandersolia GmbH — Voss Metallbearbeitung, a Wikotool Group company, is a medium-sized company with over 50 years of history. We are a team of professionals with a passion for technology and an eye for detail. We love clear communication, short distances and solution-oriented work — always with the aim of implementing your requirements in the best possible way.

Richter metal construction for industrial customers As a partner for industrial customers, Richter Metallbau offers a competent full service at an economical price. Another thing that speaks for a cooperation with us: our in-depth design and production experience. The first class quality of all our work. And of course: that we are available for you at any time and that we accompany you as partners throughout the entire course of the project. You can find an overview of our services for industrial customers below. Of course, we would be happy to advise you personally or send you an individual offer. Contact us!