Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Vimetec is a service company, made up of a team of professionals with extensive experience in the metal sector who are enthusiastic about carrying out comprehensive projects with our clients. We develop, produce and supply products that add value to our clients. We grow and learn with them.

Today Centrometal d.o.o. persistently is underway to become a leading Croatian thermotechnical equipment constructor. Accent at development is pointed to the equipment which use renewable energy sources (wood, pellets, wood chip, sun…) thus the company is actively involved in protection of the environment and effectively use of energy.

Our company was founded in 1992 as a vehicle and metal construction company. From the outset, manufacturing components was part of our core business. At both civilian and military levels, solutions for every application were designed in-house and produced in all materials. From prototype construction to medium-sized series, everything can be realized at our location.

The Deggendorfer workshops with the branch works Regener workshops, Plattlinger workshops, Mettener workshops and Teisnacher workshops are suppliers to the industry in the areas of punching, pressing and profiling. Our in-house design and our own tool, we guarantee you quick capacity availability and deadlines. Quality and reliability are our company's philosophy. Translation by Google Translate

Since our foundation in 1977 we have expanded our range and performance range continuously. In our locksmith and welding we produce sophisticated machine enclosures, chassis complicated and subject to acceptance testing pressure vessel. We are professionals at flanking manufacturing steps such as machining and surface technology. We are conscientious of AZ: From design to internal and external mounting.

Since 1994 we manufacture laser head and welded parts according to customer's particular small series.

Metal processing company established in 2004. 4000 m square meter plant with: available equipment: -Laser cutting machine TruLaser 8000 (2017), table 2x8m, cutting thickness 30mm -Bending machine TruBend 5230 (2017), 3m bending length -Bending machine TruBend 8400 (2018), 8m bending length -Shot blasting chamber 15m x 5m x 5m; 2x2,5 cranes inside -Wet painting chamber 18m x 5m x 5m; 2x2,5 cranes inside -Welding (manual) JSC" KMT" is an official dealer of PALFINGER hydraulic lifting equipment in Lithuania. PALFINGER – Austrian producer - is the biggest hydraulic lifting equipment manufacturer in the world with more than 10 000 thousand employees and 1471 mln. EURO turnover in 2017 Company “KMT” produces subframes for trucks and hydraulic cranes, tippers, components for commercial vehicles.

The individual company stufenvier was founded in 2017 as an engineering office for welding technology and occupational safety. We have continued to develop to this day. The change of name to stufenvier GmbH was followed by the establishment of an in-house welding production facility. We are currently in the development process of our own product line. From the beginning we have focused on long-term business relationships with our customers. We achieve this by building mutual trust, high-quality work results and economical work. Constant commitment, innovation and creativity enable us to solve even challenging tasks together. We are happy to accompany you on your way in all welding processes and consider every stable partnership with a company as the basis of our success.

With modern CNC machines (numerically controlled machines) we offer high quality machining services. We manufacture a range of components including: bolts, nuts, shafts, rings, bushings, sprockets, conveyor chains, idlers, sprockets and more. Offer of services and technical possibilities: 1. Turn: - Universal machine tools max. length in the tusk 2000mm, spindle passage 150mm - CNC max. length in the tusk 3200mm, spindle passage 650mm. 2. Milling: - XYZ universal machine tools - 300mm, 600mm, 1500mm. - CNC XYZ 3600mm, 1100mm, 900mm. Ribbons: - Airplanes up to 1600mm in length - Rollers up to 1000 mm chiseling: 6. Cutting with the band saw

Vermeulen Metaal We are a multidisciplinary metalworking company. We process all common materials. We specialise in: - 2+3D design and drawing work - Standard welding work - Certified welding - Piping for drinking and process water - Laser cutting - Stitching - Rolling work - Sheet metal work - Construction - CNC turning - CNC milling - works of art / attractions / specials - Assembly of semi-finished products / machines

Your competent partner in the B2B sector for metal solutions. On an area of 2000 square meters, we produce a wide variety of metal articles. We process raw products such as 1-5mm steel sheets in small and medium formats as well as bar material up to 6m long. From laser punching to edging, shielded gas welding and spot welding to powder coating. If required, including final assembly and shipping by freight forwarder. We are your partner and manufacture products for you. “Made in Schauenburg” as a matter of course for over 30 years

Marinox S.r.l. is an italian company specialized in working stainless steel. Care about aestethic details and excellent finishes of its own products have made Marinox a leading company. We operate on behalf of others by design of architects, interior designers and craftsmen, but also by developing our own products, that we eventually make, for our customers and private citizens. The company operates in several sectors: high quality range and/or custom-made furnishings, bath furnishings; nautical, food and chemical industry. Marinox follows its own customers, companies or individuals, also in designing their products, always offering suitable technical and aestetical solutions to satisfy any need.

Send2cut - we are laser cutting & engraving on a pretty large range of materials - steel, stainless steel, aluminum, plywood, solid wood, plastics, leather. Our metal laser working area - 1500x3000mm Laser working area for non metal orders - 1250x2500mm and 900x600mm. Sheet metal bending machine are suitable to bend sheets until 3000mm long, and 8mm thickness plates.

We are Ošukalns celtniecība SIA from city Jēkabpils in Latvia. We started our operations in 2003, when a new and small construction company was established with only one construction team. Company was growing and as the years went by, the need for welders and metalworkers arose. In 2018 company made metalworking branch. During years we could fulfill not only needs of construction branch, but also took orders from outside the company. Every year we are growing and producing more and more. We have gained the trust of several foreign clients with whom we successfully cooperate. We have become stable player in metalworking industry. We are providing not only metal to our clients, but solutions thru competitive pricing together with good communication, quality and fast deliveries. We have customers in Finland, Sweden, Norway, Denmark, Iceland, United Kingdom, Netherlands and Baltic states. Our main products is construction steel, material handling equipment, parts for conveyors also parts and welded assemblies for mining industry, bespoke products for industry, etc. Lot of stainless steel products have been produced for companies in food and mining industries.

IMK Maschinenbau GmbH is a medium-sized company near Grafenau in the Bavarian Forest. Thanks to our qualified and certified employees, we guarantee a high quality standard in all fields of activity: welding technology - mechanical engineering - metal and steel construction. From planning through manufacture to final assembly. Transparency and a fair price / performance ratio are a matter of course for us. We are looking forward to your contact!

RKTec is a company characterized by short and direct lines that simplify business, saving a lot of time and money for you and us. RKTec has a long-standing background so knowledge and experience that comes from the technical installation world with major industrial installations. These include CV plants, steam plants, refrigeration plants, plate and construction work. RKTec supplies its services in the industrial and construction sector. RKTec performs most of the activities at the location, at the location we are equipped with fully-equipped buses. Our employees are VCA certified and equipped with the necessary laser certificates to perform keurlaswerk.

Series manufacturer & automotive supplier for stamped and drawn parts made of various materials (including 1.4301, 1.4841, DX + Z, DC X, HC, ALU) It all began with Cleophas Lang... Shortly after the war, Cleophas Lang founded Lang Metall und Vertriebs GmbH in Munich near Ostbahnhof. The company's main business was chrome-plated parts for the automotive industry. In the 1960s, around 130 people were already employed and the company moved to Korbiniansplatz in the north of Munich. In 1974, the company moved into new production facilities at its current location for around 50 employees. In 1992, Lang Metallwarenproduktion Neubrandenburg GmbH was founded in Woldegk. An old plant near Webasto AG was purchased and rebuilt according to modern criteria. Since 1993, stamped parts and drawn parts for industry have also been manufactured in Woldegk. In 2011, we received the MAN Truck and Bus Supplier Award for our commitment. Webasto honoured both companies with the International Supplier Award in 2012. In 2016, the company in Woldegk became a finalist in the Grand Prix for SMEs. METAL PROCESSING2 At two economically separate sites in Garching and Woldegk, we produce stamped and drawn metal parts. Through close cooperation, customers of both companies benefit from many years of knowledge and a high level of flexibility. The partnership orientation also plays a decisive role in our customer relationships. We support you right from the development stage and guide you on your journey from CAD to process-reliable series production. This customer focus and lean structures are characteristic of our economically healthy companies. Just like our customers, we place high demands on the quality of our products. Continuous new purchases ensure the use of the latest technology. Through continuous personnel qualifications, we achieved a high standard that also exceeds the requirements of German premium brands and has already been recognized several times through supplier awards.

Váll-Ker Ltd. was established in 1992 with the goal of meeting the industrial and machining needs of local businesses. Our dynamic company is committed to providing high-quality services that contribute to the business success of our partners.