As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

SCHWEISSWERK URI GmbH was founded in 2019 and focuses on welding technology as a service provider for contract welding and as a manufacturer of apparatus and metal construction products. With passion for welding technology, the best quality is offered at economical prices.

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

B&S Schweisstechnik GmbH Teaching path 4 73529 Schwäbisch Gmünd

Our core competence is laser welding of provided parts. With the laser, very slim welds with a large depth-to-width ratio can be achieved. Due to the high processing speed, the thermal load is low and the distortion is minimal. Contactless welding makes it possible to process complicated seam geometries and hard-to-reach areas within the workpiece. As a rule, the welding joint is fused from proprietary material. If required, an additional material can be added via a wire feeder. With the laser, a wide range of materials can be welded without oxide (steel, stainless steel, cast iron, aluminum, cast aluminum, titanium, Hastelloy, Inconel,...)

Precision from Remscheid — custom metalworking Welcome to alexandersolia GmbH — Voss Metallbearbeitung, your reliable partner for precise CNC manufacturing and metal processing according to drawings. Whether turned and milled parts, bent parts, welding or complete assemblies — we implement your requirements exactly according to your specifications. We produce exactly according to your drawings — reliably, flexibly and with high quality standards. Diversity of materials meets manufacturing quality:From individual pieces to series, we process components made of unalloyed and alloyed steel, stainless steels, non-ferrous metals and various plastics. On request, we can provide material certificates, test reports and test reports for every product — transparent and comprehensible. Everything from a single source:From processing to finishing to packaging — we take care of every step of the process. On request, you will receive your components labelled, barcoded and ready to ship according to your specifications. What makes us special?alexandersolia GmbH — Voss Metallbearbeitung, a Wikotool Group company, is a medium-sized company with over 50 years of history. We are a team of professionals with a passion for technology and an eye for detail. We love clear communication, short distances and solution-oriented work — always with the aim of implementing your requirements in the best possible way.

Richter metal construction for industrial customers As a partner for industrial customers, Richter Metallbau offers a competent full service at an economical price. Another thing that speaks for a cooperation with us: our in-depth design and production experience. The first class quality of all our work. And of course: that we are available for you at any time and that we accompany you as partners throughout the entire course of the project. You can find an overview of our services for industrial customers below. Of course, we would be happy to advise you personally or send you an individual offer. Contact us!

The family owned company has been an important service provider in the field of mechanical engineering and metal industry for many years. We cooperate with our customers from various fields of mechanical engineering with great precision and dedication. We manufacture pieces for different needs - like chemical industry, airport ground support equipment, agricultural industry and others. Our priority is to create innovative solutions that go beyond standard solutions. WELDING: Our experienced welders are trained to weld a variety of materials, including steel, stainless steel, and aluminium. We use the most modern welding techniques and provide quality joints, according to the agreed standards. MECHANICAL ENGINEERING: The team uses state-of-the-art CAD software to construct machines and devices tailored to your specific needs. From prototyping to serial production. METAL PRODUCTS: We manufacture a wide range of metal products from a variety of materials such as steel, stainless steel and aluminium. We use precise technological procedures and provide you with high quality products. STAINLESS STEEL PRODUCTS: We specialise in the manufacture of stainless-steel products (INOX) that are resistant to corrosion, temperature and mechanical impacts. Our INOX products are suitable for use in a variety of industries, from the food and pharmaceutical industries to the chemical and petrochemical industries. Because we are convinced that we can make things even better, we have made an important decision. This year we started with the construction of new production premises measuring 900 m2. With this, we will be able to increase our quality, competitiveness and be able to participate at even larger projects.

ReBeMo GmbH specializes in the individual processing and assembly of large and small parts for a wide range of industries. We ensure a reduction in your production processes and contribute to their optimization. On over 1,500 m² of production and storage space, we provide 15 employees with services mainly in the areas of aluminum brazing, CNC machining, welding, forming, assembly, storage and picking.

The Center for Laser Welding, grains and engravings in the Stuttgart area. The Reichle GmbH has more than 35 years the competent partner for modern laser welding technology, laser texturing, Narbungen- / repairs and precise engravings for Stuttgart, in Germany and throughout Europe. Moreover, our company also in the fields of surface technology and labels on unique services.

TS steel construction Whether individual steel construction solutions, sheet metal processing or CAD designs. We find a solution for everything!

As an up-and-coming family sub-company with roots in the Rhineland, we are a reliable business partner. We carry out the welding production of prototypes, series production and assemblies according to customer specifications. Highly trained production employees guarantee compliance with the highest quality standards. Experience and highly motivated specialists guarantee targeted, innovative solutions and consistently high quality “Made in Germany” Our consistent market and customer orientation is a decisive success factor. Since 1999, we have been developing tailor-made complete solutions for our customers. In doing so, we strive for long-term and partnership-based cooperation. Customer satisfaction and quality are at the heart of our work. Professionalism, efficiency and flexibility are the cornerstones of our actions. Comprehensive quality management ensures the consistently high standard of our service portfolio. Since 2001, our company has been certified in accordance with DIN EN ISO 9001:2015.

Today, shorter development times and process chains are decisive success factors. As a strong partner, we can provide you with all-round solutions for product development and production. - We shape your requirements and requests in teamwork. - Everything under one roof design and development - prototyping - resources construction (tools and dies, jigs and fittings, etc.) - series production

We are a Slovenian family company with a 25-year tradition. We are engaged in the production, manufacture and assembly of a wide range of metal products. Our best-selling products are fences, canopies, structures, boutique metal products, shelves and products for the automotive industry, in which we are particularly specialized.

"Officine Meccaniche Pellanda is a company located in Northern Italy and with longer than 40 years’ experience in Mechanical Processing (milling and drilling), Carpentry and Assembly for low serial production. Our references list does include several industries Europe wide, just by way of example, Metallurgy, Railway, Aerospace, Machine Tools and Energy. All useful information on Company “Officine Meccaniche Pellanda” are available on our website www.meccanichepellanda.com, in specific: • Machinery park - https://www.meccanichepellanda.com/en/products-and-services/mechanical-working/ • Control system - https://www.meccanichepellanda.com/en/products-and-services/test-controll-system/ • Certification - https://www.meccanichepellanda.com/en/certifications/

undertakings About us Bay Metal is a sole proprietorship founded in 2015 by Kazım Bay. With more than 25 years of experience in the sector, our company has been providing customers with reliable and professional services since its inception and continues to develop every year. Bay Metal's main activity is the production of specific transport racks for the automotive industry and its suppliers. In addition to transport racks, Bay Metal analyses the needs of its customers and manufactures appropriate storage systems. The company carries out sawing, drilling, bending, pressing, welding and assembly work in-house. At the customer's request, the product is painted or galvanized as required. customer satisfaction Thanks to our flexible and practical production line, which we can design according to the needs and wishes of our customers, we respond quickly to customer inquiries. With our extensive and strong network connections, we deliver and install all required accessories for the transport racks (e.g. ratchet lashing set). The satisfaction of our customers fills us with joy. company structure Bay Metal is managed and managed internally by the family. Our family members, who specialize in their respective areas of expertise, supervise the management of the relevant departments and carry out the usual tasks themselves. There is an open and transparent flow of information between departments throughout the process. With 4 administrative staff and 12 production employees, we are continuing our activities with a total of 16 people. Work ethics and environmental sensitivity Bay Metal's most important working principle is reliability and confidentiality towards customers, suppliers and employees. While we enthusiastically dedicate ourselves to our work, we share an honest and sustainable wish for the future with all stakeholders. All processes, from material procurement to disposal of waste materials, are monitored with great care by our corresponding department. When shipping our products, we prefer logistics companies that strive to minimize the carbon footprint and closely track all services we receive. Our values - Continuously grow and improve as a team, - Never deviate from our quality policy, - Respond flexibly to urgent and quick inquiries, - Simplify processes. Vision and mission Vision: To be the industry's first choice by strengthening machinery inventory, bringing employees to the highest level, providing solutions to customers through the engineering department, making all tasks easier and becoming the industry's preferred company. Mission: Prove ourselves and grow steadily through the work we do in our industry.