The core business of our company is production of conveyor components, machine elements for open pit mines. Main components that we produce are made of steel, but also we produce various rubber , polyurethane and plastic elements, Due to constant development of our company we invested in CNC milling, cutting and turning machines. We have large capacity for production of rubber elements - molding in process of vulcanization. The elements made of plastic or urethane are either injection molding or cast pouring. We invite to cooperation with our company

allowed us to appear in the Austrian and German markets, where we have been present as an active supplier since 2005 . Our site is located 14 km from Budapest, in Ócsa , next to the M5 motorway. We have sufficient capacity to produce and contract new products and parts with the help of our modern injection molding machines. For fast customer service, we are available in up to 3 shift processes. In our factory, we can serve any customer's needs with our equipment from 20 tons to 250 tons . Our Nissei and Arburg machines can be equipped with a tempering, suction, extractor, dryer or even a conveyor belt, as required by the nature of the product. During the processing of plastics, we use, among others, Pa 6, Pa6.6 Pc, ABS, POM, PBT, soft PVC, PE, PP materials, from which we mainly produce technical components for our domestic and foreign partners. We also undertake the design, manufacture, maintenance and renovation of tools that are essential for the production of plastics . If required, we also provide appropriate storage , for example for seasonal products.

Albtechplast AlbTechPlast sh.p.k AlbTechPlast sh.pk established in 2013, is a leader in the production of plastics and packaging materials, significantly supporting the agricultural sector, and beyond. ATP brings to the Albanian market the best quality of packaging and production of plastics thanks to technology, production capacity and the right people to help your business grow. Our success is based on the provision of a wide range of plastic-based products, and a closed-loop production system affecting all stages of product realization, starting from raw material, form production machines, production machines plastic, to the final design. mission ATP offers consistent quality and excellence by combining the constant availability of our wide range of products VISION ATP aims to provide market solutions through a closed production cycle for all ranges of packaging products. technology Technology is one of the strongest points of AlbTechPlast sh.pk, where by embracing the latest technology, we enable maximum quality

We are a family company based in Munich (sales) and a production facility in Croatia near Zagreb. We have specialized in injection molded components in the prototype area. We can also offer smaller stamped components and turned parts. For more information, do not hesitate to contact us.

inovaPlus is an engineering partner to the automotive , aviation ,defence and R&D industry providing complete solutions for product development projects. Our assets: A team of skilled and experienced engineers and technical experts specializing in project management , profession of CAD/CAE tools also know-how of engineering plastics, composite materials, prototype making techniques and moulding feasibility.

RILPLAST snc is a company active for over thirty years in the injection molding of thermoplastics and technopolymers. Inserted in the dynamic artisan reality of Lower Sebino, over the years the company has developed skills and experience in the most varied sectors of application of plastic, from products for early childhood, to articles in the electrical and electronic appliance sector , from the hospital and medical sector to that of sporting goods, lighting engineering, automotive and food packaging. Having verified how the customer appreciates the possibility of turning to a partner capable of relieving him of the many difficulties associated with the various phases of development and production of the products, the company has already decided for some time to take charge, also through a network of collaborators located in the immediate vicinity of the plant, of all pre and post molding operations. Thanks to the experience acquired, today Rilplast is able to satisfy the customer in all the different phases of the production: from the design to the prototyping and realization of the moulds, from the analysis of the most suitable materials up to the special finishes proposed.The company also offers internally a pre-assembly or/and complete assembly service of the molded parts, both manually and automatically, also with the use of in-house design machines. Certification and high quality of raw materials, use of any thermoplastic material from commodities to technopolymers and a technologically advanced machine park, which includes 26 injection presses with tonnages ranging from 6 to 450 tons fully automated, presses for micro molding and vertical presses for insert overmoulding, plus a whole series of complementary machinery, allow the company to work all the main plastic materials in the best possible way, creating both standard and technical details.

PLAR Ltd. was established in 2003 with the goal of creating plastic components. The primary pursuits include: • Manufacturing our own plastic-based goods, • Manufacturing mosquito nets and accompanying parts, • Tool production and design, • Providing services of metal machining, • Trading and wholesale export of plastic goods. In addition to projecting and producing tools, we work with plastic. PLAR Ltd. was established in 2003 with the goal of creating plastic components. The primary pursuits include: • Manufacturing our own plastic-based goods, • Tool production and design, • Trading and wholesale export of plastic goods. Worldwide standards Manufacturing tools for projecting plastic elements, designing equipment for tin processing and machine processing, and producing the previously mentioned equipment are just some of the fields in which the company is continually developing and improving, gaining us the trust of our clients. In the field of production, we work with a top team of employees distinguished by their experience and expertise in the production of a wide range of plastic and aluminum products.

Modelia.Tech is a company specializing in 3D printing. It offers comprehensive services including design, prototyping, and manufacturing using additive technology. Its products and services cater to various industries, including automotive, aerospace, healthcare, and consumer goods. Modelia.Tech employs modern technologies and materials to provide clients with high-quality and precisely crafted products. The company also focuses on innovation and research in the field of 3D printing, supporting the development and integration of this technology in the industry.

Technoplast GmbH is a specialist company for individual requirements. Working hand in hand with external development and design offices, we translate your wishes and requirements into a high-quality end product. Our areas of expertise here are far-reaching and support your requirements in terms of design and functionality. Our expertise is the basis for your success. With our expertise in the area of manufacturing high-quality technical plastic parts and assemblies, we offer you project support from the initial concept to the finished component. Highest quality is our standard Our many years of experience and certification in the area of manufacturing plastic parts and assemblies from the initial discussion to the finished product has been a maxim for more than 10 years that is well above the standard and we are happy to make available to our customers. Consistent for our customers We monitor the entire process chain and adapt it to your needs at short notice. From design to toolmaking to completion, we offer you an all-round package of service and production. Local production All our steps are carried out by us or our partners in Germany. For you, short distances mean perfect quality and quick response to market demands.

Injection and blow moulding plastic parts Metal machining

We are a medium sized company in the plastics processing. Our production portfolio mainly consists of injection molded components. We have 38 machines with up to 800 tons of clamping force in the 1K and 500 closing force in the 2K range. In addition, we work component development and Beuteiloptimierung as a service.

Franz Elkuch AG Synthetics manufacturing plant (Switzerland) Injection moulding specialist since 1965 Machines with 25 - 500 tons clamping force (moulds up to 7 tons) Processing of all thermoplastics Moulded parts for plastic pipes, cable protection and sewage systems Technical parts 20 - 3000 gram Housings for medical equipment and apparatus ( boilers, gas heaters etc.) Associated toolmaking We plan, accompany and realise injection moulded products from the very beginning: from design, engineering, toolmaking to series production. As a third-generation family business, we are fully committed to the production of innovative injection moulded parts. We produce customised orders as well as our own product developments. Translated with www.DeepL.com/Translator (free version)

We are a manufacture plant based in Bagnatica (Bergamo), North Italy, at about 60 km from Milan and with a strategical position in the "middle of Europe" with an easy connection with all the European countries. We are experts into manufacture (injection moulded) of packagings. Our customers are mainly from the following sectors: private and public hospital, waste collectors (packaging for clinical or hazardous waste) and industry (packagings for food & non food goods) with a predilection for the international markets (B2B and B2C customers). We are ISO 9001 and ISO 14001 approved. Finally the company is investing a large part of his R&D activity into recycled plastic application for hazardous waste packagings and industrial packagings too.

Pfaff GmbH, based in Waldkirch near Freiburg, was founded in 1992 by Mr. Adolf Pfaff and is an owner-managed company. In 2018 the management was taken over by daughter Corinna Pfaff. Her husband, Andreas Buff, is the company's technical director, authorized signatory, and the creative mind of the company. A clear company size and a team of experts guarantee fast and direct communication channels as well as a high degree of flexibility. State-of-the-art construction and manufacturing technology puts us in a position to meet particularly high demands on materials, tools and machines. Modern production, qualified personnel and quality management certified according to ISO 9001 and ISO 13485 guarantee our customers excellent quality in economic production. As part of our expansion, we have invested continuously in recent years in our modern machinery and qualified employees. Today we employ 17 people and produce in a one and a half-shift operation on an area of 700 square meters.

ABOUT US In January 2020, in Istanbul, Eroğlu Kalıp Metal San. ve Tic. Ltd. Şti. has been established. We manufacture metal injection and plastic injection molds using hot work tool steels and plastic tool steels. We mainly serve the Automotive, White Goods, Electrical-Electronics sectors. By equipping our facility with advanced technology CNC machinery and equipment, we aim to carry out the design and production stages with great care with a staff who are experts in their fields, experienced and know the technology closely. our vision To ensure that quality is adopted and developed as a company policy based on customer satisfaction. In the Turkish Economy of our company; To make our position in our sector permanent by constantly developing and growing in our fields of activity in parallel with the developing technologies by adhering to the principles of business life, business ethics and business culture. Our Mission To provide products and services that will create value beyond customer expectations in line with our company and our quality targets, to be an exemplary and pioneering organization in the sector. DESIGN We aim to manage the design process in line with their requests and opinions, always in communication with our customers. Performing kinematic and dynamic analysis in CAD environment in order to anticipate and resolve the problems that may occur before manufacturing We aim to achieve the best result by combining our experience in gating system design, customer expectations and injection molding analysis program.

KERO AG - innovative and customer-oriented For over 30 years we have been developing and manufacturing plastic parts of all kinds for our global customers from all industries. Thanks to our expertise and continuous investment in the most modern manufacturing processes, we are your guarantee for the highest quality at competitive prices. With us you get everything from a single source, from the project to the finished plastic part. You benefit from over 25 years of experience in plastic injection molding and mold construction, paired with the latest specialist knowledge, flexibility and the highest level of quality awareness. If necessary and useful, we can fall back on a large network of specialists. This enables us to offer our customers tailor-made solutions at affordable prices. Our sustainable production is characterized by the constant improvement of work processes and the careful use of our resources. This enables us to secure numerous jobs for the future. KERO AG is your reliable partner!

The family-owned company TG Kunststoffverarbeitung GmbH is one of the internationally active groups of companies and combines the competences of injection molding and metal processing at two locations in Germany. The company currently employs around 220 people and is managed by Monika Thorwarth and Christian Grebe. In addition to the production of injection molded articles for well-known companies in the household and automotive technology, the company has been producing its own extensive range of wheels and castors as well as sanitary drain sets for kitchen and bathroom since 1955.