h2> Success- now and in the future /h2> Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality. Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

Our enterprise is a private company which continues the 25-year tradition of clutch and brake production in Ostrzeszów, Poland. The company was established in 1993. We employ a highly qualified staff of over a hundred and have our own research and development base. We manufacture a wide range of controllable clutches and brakes used in machines and appliances in various branches of industry. We also cooperate with major German enterprises in this regard. In order to guarantee high quality of our products and meet our customer's needs, we implement the ISO-9001:2000 quality system confirmed by a certificate obtained from DQS. Range of services offered by FUMO–Ostrzeszow: 1. Machining: • Turning: Dmax = 560 mm; Lmax = 900 mm; weight max 100 kg • Milling: Lmax = 1000 mm; Smax = 1000 mm; H max = 1000 mm; weight max 500 kg • Straight teeth chiselling: Dmax = 500 mm; Lmax = 90 mm; module mmax = 5 • Grinding of holes: Dmax = 120 mm; Lmax = 160 mm; weight max 25 kg • Grinding of shafts: Dmax = 150 mm, Lmax = 500 mm; weight max 25 kg • Locksmithery and fitting, including the winding of coils of self-baking wire: coil wire dimensions: D=0,15÷1,40 coil dimensions Dotw 25÷200; L = 10 ÷ 80 mm 2. Heat Treatment: • Hardening of pieces in the electric tunnel furnace with ZAS III protective atmosphere piece flank Lmax = 450 mm lub D max = 450 mm; thickness 0,5 ÷ 6,0 mm; weight max 4 kg • Annealing, hardening, tempering in furnaces without protective atmosphere SQ310 • Induction hardening with UNITERMA–60 system 3. Thermochemical Treatment: • carburizing 4. Chemical Treatment: • phosphating of pieces coat thickness 0,003 ÷ 0,005 mm • blacking 5. Plastic working: • die shearing, stamping, tonnage capacity of the press: 16; 100; 400 tonnes 6. Tool Shop Work: • Manufacture of technical instrumentation • Manufacture of plastic working instrumentation: blanking dies, stamping dies, etc.

At five locations in Germany Herzberg am Harz Stuhr near Bremen Norderstedt near Hamburg Reinberg in Saxony Thale in the Harz Mountains, leads the group HEAT heat treatment on a broad range of technologically sophisticated products through. Clients come from the aviation and aerospace industry, the automotive industry and in mechanical engineering. Heat treatment on a large scale and important contributions to the optimization of the performance features delivers the HEAT Group for the automotive industry in the areas of: - Passenger restraint system - Diesel injection systems - Suspensions - Drive Technology

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

Tehnomat Inginerie Industriala is a Romanian company located in Cluj-Napoca, it was founded in 1998 and our activity is structered to designs and manufacturing assembly line. specials machines and stations for automotive industry.

Engineering and Machining precision is specialized in manufacturing and design of mechanical products which based on the use of CNC machine tools (8 Machining Centers, 2 CNC Lathes), as well as precision metal construction (Welding capacity: SMAW, MIG, TIG, ...), (20 welding stations Fronius), (Polishing equipment, sandblasting units, painting units, assembly units). EMP is EN9100 V2016 certified. We have a high skilled and young team able to understand and to meed the higest level of customers expectation upon all standards of manufacturing and construction (ASME, ASTM, GE standards, RR standard....) and we are able to work with all kind of material both imperial & metric. Today EMP have a good reference in flying part with AIRBUS Tier 2 and OEM (Engines) Licencies for Engine tooling & Ground Support Equipment . The main programs reference are: A380, XWB, LEAP 1A, LEAP 1B....... The excellent Geostrategic location of Tunisia allow EMP to get order from all the world and export to any country with a good lead time. The Team is around 200 Peoples most of them high Graduated with international qualifications. EMP have a perfect IT system to manage and control of all processes in real time.The Company headquarter in based in Tunis city (Near the the main Airport), we have a milling site in the same area and the construction activities is based in Sfax within 3 production sites.