Liegau-Augustusbad is located in the vicinity of Dresden/Saxony, with perfect logistical connections to the motorway and Dresden airport. The Company’s manufacturing area is around 26,000 square metres and has been producing a wide range of moulded rubber components since the early 1900s. As a result, we have gained extensive knowledge in the field of rubber processing and parts manufacturing. Due to the fall of the DDR, the Company was later privatised in 1991, with large investments made in a more modern manufacturing process and extension of the machine park. The KET has currently around 50 highly skilled and motivated employees, enabling us to work a 3 shift system in order to fulfil our customer’s needs, whether it’s a Simple form or a complicated Moulding, we aim to please. Through our quality management system DIN EN ISO 9001 and DIN ISO 13485 certification. We are able to guarantee a very high level of customer satisfaction and quality of our products. Our technology department control and monitor the preparation, introduction and implementation of our production processes according to clearly defined specifications. The most important operating procedures we use within our production processes are: • 3-D-printing/Plotting • compression moulding process (CM) • transfer moulding process (TM) • injection moulding process (IM) • injection transfer moulding process (ITM) The vulcanisation operating processes are carried out in semi and/or fully automatic machining cycles. We also offer a number of procedures and technologies for the post-treatment of produced products (finishing): • thermal post-treatment (Curing) • mechanical post-treatment (low-temperature deburring) • manual post-treatment (hand deburring / assembly) • covering and coating processes We manufacture parts from rubber compounds such as EPDM, NBR, SBR, CR, ACM, NR, FPM, IIR, MVQ and LSR (silicones). All of which have received clearance from the automotive industry, as well as KTW and DVGE clearance for the food and pharmaceutical industries. In addition to rubber vulcanisation, we also manufacture a large quantity of thermoplastic elastomers (TPE). Another key feature of the materials sector is the use and manufacture of recycled rubber granulates from various basic elastomers The equipment and control systems of our Machine Park reflect the current state of the art in engineering, thus Enabling us to meet the future requirements of production engineering. We can manufacture parts from less than 1 Gramm up to 4,5 Kilograms.

Since 1986, IPV injection has specialized in the development and production of plastic injection parts For over 35 years, we have acquired recognized expertise in many sectors of activity: automotive, construction, packaging, furniture, food, electricity, plastronic, cosmetic, microbiology IPV injection is part of a family holding company, and has remained a reactive sized company

"Success is what drives us, quality is our obligation" As a medium-sized, owner-managed company, we design and produce solutions from thermoplastics for various branches of industry. And that for over 25 years now. Competently. Flexible. Successful. It is a long way from the idea to the finished product, which can only be successfully trodden when all factors for production are optimized and harmonize - from the idea, the individual development and construction by qualified employees to reliable logistics. Prototyping and the latest process technology are just as indispensable as the right materials and tool concepts. Everything at the highest quality level. Guaranteed. Certified.

Welcome to SOARPLASTICOS, Lda.! With a team of around 40 skilled professionals, we specialize in thermoplastic injection services, providing our valued customers with top-notch 1K and 2K injection solutions. Additionally, we offer assembly services for components, tapes, and more. Certified under ISO 9001:2015, our company is committed to delivering services of unparalleled quality while keeping competitive pricing in mind. To achieve this, we boast a modern fleet of machines, featuring units with clamping forces ranging from 40 to 900 tons. Among these, we proudly include two-component injection and gas-aided injection systems. To streamline operations and reduce costs, a significant number of machines are equipped with robots, enabling shorter shot cycles and minimizing part handling. At SOARPLASTICOS, we approach projects with dedication from their early stages. We are more than willing to collaborate with clients during product development, offering valuable insights to achieve the most suitable geometries for stable and efficient processes. In essence, we strive to find the best-fitted solution for each client. Our expertise lies in producing plastic components, often incorporating metallic inserts. To ensure comprehensive service, we partner with specialized external vendors for finishings such as painting, cataphoresis, or chroming. Moreover, we excel in complete system assembly, meticulously adhering to supply plans, many of which are conveniently received through EDI. Over time, we have heavily invested in bi-component technology. Today, we boast Engel machines with clamping forces ranging from 400 tons to 600 tons, designed to accommodate tools with inner kinematics, robot transfer, and more. -- Exciting News! Our commitment to environmental responsibility and the global energy challenges we face has motivated us to venture into self-production. Presently, a considerable portion of our energy requirements is met by our very own photovoltaic park. With favorable conditions, we envision fulfilling our entire energy consumption through self-production. Thank you for visiting us at SOARPLASTICOS. We are proud of our journey so far and look forward to continuing our mission of delivering exceptional services while embracing sustainable practices. Should you have any inquiries or projects in mind, please don't hesitate to get in touch. Together, let's soar to new heights of excellence!

Dear Sir, Dear Madam, EL-SAN KAUCUK METAL SAN.TIC.LTD.STI. is a supplier of molded rubber parts, plastic and metal parts to predominantly leading manufacturers of sealing systems and machines in Europe. With over 30 years of experience and customer-oriented production, we strive to continuously improve our processes and skills. This is our company philosophy based on performance and quality. We at EL-SAN (production) - E.K.S. (export) work exclusively with high-quality materials from a wide range of different elastomers, which are processed professionally and with the highest precision. Production at the latest technical level and according to international standards (Din, ISO) is a matter of course and guaranteed. Thanks to our flexibility and expertise, we always meet the wishes and requirements of our clients. Our customers trust in our long-term experience, quality, accuracy, speed and on-time deliveries.

As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

Our services at a glance:  Intelligent inflatable seals "eCOREseal"  Molded seals  2K molded seals (plastic / elastomer, e.g. molded sealing lips)  Extruded profiles  round cords  Hose rings  cuffs  Special materials with approvals (drinking water, food, pharmaceuticals and hygiene EHEDG)  FFKM, FKM, EPDM SILICONE, NR, SBR, NBR, HNBR  Training for technology and buyers in the field of sealing technology Sealing solutions - a holistic approach Thanks to many years of experience in the field of sealing technology, we offer our customers comprehensive advice in advance, through the physical layout and design of the seal, right up to the first sampling and ultimately series monitoring. By analyzing your purchasing behavior, we can help you slim down your purchasing portfolio. Our customers bundle inquiries and thus also the costs in the area of sealing technology.

EIKOS srl is a manufacturer of technical plastic parts and specializes in injection molding, overmolding and 3D printing. In general, we process all common technopolymers that are available on the market: PS - ABS - PP - PE HD - PET - PA 6 - 66 - 68 - POM - PC - PBT - PVDF - PPS - PU -Teflon. The company was founded in 1995 and is based in Turate, a suburb of Milan. Turate is a strategic location due to its proximity to the Swiss border and all Milanese airports. Together with our customers, we develop components for a wide variety of applications and requirements: electrical industry, machine and plant construction, chemical industry. https://www.youtube.com/watch?v=jR1EVlDcHCw

BC ITALIANA is a company with over 50 years of experience in both product engineering and plastic injection moulding of complex components. Currently the moulding department (4,800 square meters out of a total of 6,100 available) consists of 30 machines with 50 to 1,000 tons clamping force: this great difference of tonnage allows the moulding of micro components up to large or medium-sized parts. Furthermore, some plastic parts are produced by nitrogen moulding technique. This process can avoid functional, structural and aesthetic problems that sometimes arise with traditional moulding methods. BC ITALIANA manufactures, according to the highest quality standards, a wide range of products belonging to many industries: from automotive to rail, from medical to musical instruments. The main competitive advantages of BC ITALIANA are the long-time experience in engineering and moulding of complex plastic components, both from technical and aesthetic point of view. So, when it comes to dealing with customised and complex plastic parts BC ITALIANA performs at its best. Co-design, problem solving and extremely cared injection moulding are BC ITALIANA special services for all its clients.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

Expyou srl is specialized in the design of molds in the molding of plastic injection and blow molding items. We have an efficient mold construction department, we use aluminum and steel to meet the needs of the customer In addition to the Italian reality, we have a very competitive foreign production site for both molding and assembly. Our strengths are the punctuality and the quality of the supply,

We (Atabeta Makina) are a company specialized in inventing and delivering solutions for various engineering problems and manufacture different products all under one roof. We have CNC machines (CNC milling & CNC turning) drilling, tapping, welding etc machines in our machine park. As well as machining & welding jobs we work as Contract & Custom manufacturer, we also work surgical orthopaedic implants sector. Apart from that we service all kinds of plastic & sheet moldings. You can visit our website www.atabetamakina.com for more information. and we would like to support you according to your parts inqueries.

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.

ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic. Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners. We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use. In addition, we can support you with the construction or simply with the data transfer for 3D models.

Foundation 1967 in Barcelona. Verlan has been supplying thermoplastic parts all over the world for 50 years. We have two production plants, in Barcelona and Borges Blanques, with a production area around 15,000 square meters. Our fully automated production process and optimized structure allow us to offer a highly competitive price and a flexible and responsive service. Due to our fully automated system with a centralized feeding of raw materials and robots in each injection moulding machine, we are specialized in technical parts for medium and high volume. We have a dust-free space, technologically advanced hydraulic and electric injection moulding machines (with a clamping force up to 450 tonnes), that are and among the leading brands in the sector. We also have machines for overmoulding and two-component injection moulding machines. We work for the automotive sector, household appliances, electrical, electronics, transmission, and other precision products sectors for various industries. We have the following certificates: ISO 14001:2004 ISO TS 16949:2009

Italstock Srl's main skills consist in mould and product development support and manufacturing of technical and customized drawing parts in elastomeric materials. Our commitments flow into automotive, heating, hydraulic, pneumatic, household appliances and industrial fields, where we have been improving our know how since the eighties. The company has been active in this sector since the early 80s and is based in a highly industrialized area, characterized by significant tradition and experience in the production of industrial seals and in the rubber processing industry. The activity is supported by a distinctive entrepreneurial skill associated with competence, passion for one's work and continuous predisposition for improvement.

THE COMPANY Poliamid Plastics is a dynamically developing, Polish, family-run company operating since 1989 on the market of plastics. In the initial period of operating, the company only produced simple elements for the mining industry, and industrial fittings. Today, Poliamid Plastics is the company that offers several thousand of products. We specialize mainly in producing accessories for preinsulated pipes as well as plastic protections for many industries. We also carry out special projects for our customers, ranging from design to serial production. WHAT DO WE OFFER? The highest quality components, produced by our company are applied in various sectors of industry in the whole world: – plastic protections: caps and plugs for many sectors of the industry, – products for preinsulated pipes: centerrings, pipecaps and accessories, – special products: components made according to individual customers needs.

Founded in 1998, ARCARM S.R.L. is a manufacturer of technical rubber parts for various industries. The company is specialized on hydraulic rubber seals for the automotive and construction industry, but recently has expanded into almost every industry in need of rubber molded components. Certified rubber compounds (NR, NBR, EPDM, Silicone, FKM, CR, etc.) from different manufacturers are used in the parts production process. Being a member of IMDS since 2019, we value the quality of our products.

FESP MOLD SRL was founded in 1997 by Dario and Carlo Chiampesan who, after a decade of experience in the production of molds for jewelery, they founded FESP MOLD SRL exclusively for the production of molds for plastic products. We believe in the qualities of a family-run business, that is - COMMITMENT AND MAXIMUM DEDICATION TO THE COMPANY; - CONTINUITY OF KNOWLEDGE, PRIORITY IN PASSING THEIR EXPERIENCE WITHIN THE COMPANY; - RELIABILITY; - OPTIMAL RELATIONSHIP WITH COLLABORATORS WHO FEEL AN INTEGRAL PART OF THE COMPANY; - PERSONAL TOUCH IN RELATING TO CUSTOMERS AND THEIR NEEDS; - HONESTY AND INTEGRITY IN BUSINESS. Mold construction FESP MOLD SRL molds are made of tempered steel. They are characterized by the multi-cavity, the high production in the hot chamber, the use of nozzles and shutter systems or with sequential closure. Our products are distinguished by internal handling technology, trolleys, unscrewing and inclined rods. The steels, normalized and other components of the mold are purchased from the most important European companies and the molds are accompanied by certificates.